Stopkové frézy

CMT C906 ořezávací fréza se šikmými zuby, stopka 8 mm, kopírovací ložisko na čele

CMT - C706 Trimming cutter, angled teeth

(1 pcs)

1 117 Kč / pcs

These new CMT cutters feature double bearing and are spiral ground allowing clean smooth cuts in many materials. You no longer have to rotate the material or move the template. Unique tool especially for milling curved shapes along the template.

Code: C90619111

CMT C906 ořezávací fréza se šikmými zuby, stopka 12 mm, kopírovací ložisko na čele

1 534 Kč –5 %

CMT - C906 Trimming cutter, angled teeth

(1 pcs)

1 457 Kč / pcs

These new CMT cutters feature double bearing and are spiral ground allowing clean smooth cuts in many materials. You no longer have to rotate the material or move the template. Unique tool especially for milling curved shapes along the template.

Code: C90669011

c906 orezavaci frzy rovne zuby s loziskem 1 web result

from 765 Kč –5 %

CMT / Flush Trim Router Bit, Straight Cutters Ø9.5–19 / Ø8 mm shank

(1 pcs)

from 726 Kč / pcs

Edge trimming and template-guided shape copying without “waviness” and without the need for sanding. The router bit has a guide bearing at the tip, so it follows the template/edge precisely and maintains the final dimension.

Code: C90609611

CMT C906 ořezávací fréza s rovnými zuby, stopka 8 mm, kopírovací ložisko na čele

1 298 Kč –5 %

CMT / Ořezávací fréza rovné zuby Ø12,7x25,4 / stopka Ø8mm

1 233 Kč / pcs

Code: C90622711

CMT | C712 Drážkovací fréza se závrtným zubem a stopkou 6 mm

from 778 Kč up to –5 %

CMT | C712 Grooving Router Bit with Brad Point, 6 mm Shank

(1 pcs)

from 739 Kč / pcs

Code: C71206011

cmt c935 falcovaci sada polodrazka obsah.jpg

2 558 Kč –5 %

CMT | C935 Half groove folding kit

2 430 Kč / pcs

Semi-slotted cutter sets allow you to make an unlimited number of cuts by setting different cutting heights on your cutter and changing the bearings on the cutter included in the set.

Code: C93550111

CMT C901 dlabací a srovnávací fréza Ø31,7×12,7, stopka 12 mm – produktová fotografie.

877 Kč –5 %

CMT | Dlabací a srovnávací fréza Ø31,7x12,7 / stopka Ø12mm

(1 pcs)

833 Kč / pcs

Code: C90181711

C174 drazkovaci frezy se zavrtnym zubem 2 web

from 906 Kč up to –5 %

CMT | Drážkovací a závrtávací fréza / stopka Ø12mm

from 860 Kč / pcs

CMT cutters have long-lasting HM blades, are precision sharpened, and are suitable for milling softwood, hardwood, glulam, DTD, laminate, MDF and Corian. Also suitable for CNC machining.

The sharpening of the cutter face allows deep drilling operations.

Code: C17710011

Drážkovací stopková fréza CMT s kopírovacím ložiskem – detail nástroje

1 171 Kč –5 %

CMT | Drážkovací fréza s ložiskem Ø15x31,7 / stopka Ø6mm

(1 pcs)

1 112 Kč / pcs

Code: C71215011B

1 083 Kč –5 %

CMT | Drážkovací fréza s ložiskem Ø16x20 / stopka Ø8mm

(1 pcs)

1 028 Kč / pcs

Code: C71113011B

cmt c936 uhlova freza s loziskem stopka 8mm produkt.jpg

from 949 Kč –5 %

CMT | Fréza úkosová s ložiskem 45° Ø31,7x9,5 / stopka Ø6mm

(1 pcs)

from 901 Kč / pcs

Code: C73628011

CMT C911 Drážkovací fréza s ložiskem (Varianta frézy D22x20 B22 S=8 HM)

1 061 Kč –5 %

CMT | Grooving Router Bit with Bearing Ø16x20 / Ø8 mm shank

(1 pcs)

1 007 Kč / pcs

Suitable for copying using a top template and for edge-guided routing – the bearing holds the path, so you cut to a clean, exact dimension without complicated fence adjustments.

Code: C91116011B

CMT C706 ořezávací fréza s čelním kopírovacím ložiskem, stopka 6 mm

1 036 Kč –5 %

CMT | Ořezávací fréza rovné zuby Ø9,5–19 / stopka Ø8mm

(1 pcs)

984 Kč / pcs

Code: C70606411

CMT C738 Zaoblovací fréza vydutá (Fréza C 938

from 869 Kč up to –5 %

CMT | Radiusová fréza – vydutá, pro vnější zaoblení hran, stopka 8 mm

(1 pcs)

from 825 Kč / pcs

- Tool body made of premium steel.
- HM carbide blades.

Code: C93816011

CMT C937 zaoblovací fréza vypouklá s ložiskem – produktová fotografie (oranžové tělo, HW břity).

from 1 058 Kč –5 %

CMT | Zaoblovací fréza vypouklá R4,75–R19 / stopka Ø12mm

(1 pcs)

from 1 005 Kč / pcs

Code: C93769011

from 935 Kč up to –5 %

CMT |Radiusová fréza – vydutá, pro vnější zaoblení hran

(1 pcs)

from 888 Kč / pcs

- Tool body made of premium steel.
- HM carbide blades.

Code: C73816011

from 658 Kč up to –24 %

CMT C174 Grooving cutter

(1 pcs)

from 625 Kč / pcs

CMT cutters have long-lasting HM blades, are precision sharpened, and are suitable for milling softwood, hardwood, glulam, DTD, laminate, MDF and Corian. Also suitable for CNC machining.

The sharpening of the cutter face allows deep drilling operations.

Code: C17408011

cmt c822 talirova freza kotouc detail.webp

from 566 Kč up to –5 %

CMT C822 Disc cutter

(1 pcs)

from 537 Kč / pcs

Plate milling cutter without countersink, for milling grooves from 1.5 - 6 mm wide. The drift shank can be freely combined to create a groove according to your own requirements.

Use type 3 (without copy bearing) 4B (with copy bearing).

Code: C82232011

CMT C915 fréza na V drážku 90°, HW, stopka 8 mm – detail nástroje

from 739 Kč –5 %

CMT C915 Milling cutter for V-slot 90°

(1 pcs)

from 702 Kč / pcs

- Clean, perfect cuts in boards or drawer fronts
- For edge beveling
- For milling lettering

Code: C91512711

CMT C924 Trn talířové frézy, upnutí matkou s ložiskem (Varianta frézy S=12)

from 518 Kč up to –5 %

CMT C924 Arbor disc cutters, clamping nut with bearing

(1 pcs)

from 492 Kč / pcs

Mandrels for disc milling machines without countersinking with bearing

Code: C92408010

CMT C924 Trn talířové frézy bez ložiska (Varianta frézy S=12)

393 Kč –5 %

CMT C924 Disc cutter arbor without bearing

(1 pcs)

373 Kč / pcs

Spines for plate cutters.

Code: C92408000

IGM falcovací žiletková fréza H=12,7 mm, Ø34,9×12, stopka 6,35 mm – produktová fotografie s kopírovacím ložiskem.

CMT C935 Falcovací fréza na polodrážku

(1 pcs)

1 581 Kč / pcs

Code: F04935551

cmt c935 falcovaci freza polodrazka rozmery d i h.jpg

from 1 123 Kč –5 %

CMT C935 Falcovací fréza na polodrážku s dolním ložiskem 12mm

from 1 066 Kč / pcs

With the extra-long half-groove cutter (19 mm), you can even restore the grooves of old window frames for the insertion of insulated glass.

Code: C93581711

Schéma rozměrů falcovací frézy: D průměr, I výška falce, H šířka falce

from 1 014 Kč –5 %

CMT C935 Rabbeting bit

(1 pcs)

from 963 Kč / pcs

With the extra-long half-groove cutter (19 mm), you can even restore the grooves of old window frames for the insertion of insulated glass.

Code: C93531711

CMT C936 úhlová fréza s kopírovacím ložiskem, stopka 8 mm – produktová fotografie (oranžová řada CMT Orange Tools).

from 928 Kč –5 %

CMT C936 Chamfer bit with bearing

(1 pcs)

from 881 Kč / pcs

- HM carbide teeth.
- Orange Teflon non-stick coating.
- Copy bearing.

Code: C93628011

cmt c936 uhlova freza s loziskem rozmery d s i l a.jpg

from 1 204 Kč –5 %

CMT C936 Úhlová fréza s ložiskem 12mm

(1 pcs)

from 1 143 Kč / pcs

- HM carbide teeth.
- Orange Teflon non-stick coating.
- Copy bearing.

Code: C93692011

CMT C938 Zaoblovací fréza vydutá (Fréza C 938

from 1 085 Kč –5 %

CMT C938 | Roundover router bit 12 mm

from 1 030 Kč / pcs

- Tool body made of premium steel.
- HM carbide blades.

Code: C93875411

CMT C955 fréza na rohové spoje 90°, 50,8x22,2, stopka 12 mm

from 2 666 Kč up to –5 %

CMT C955 12 mm

from 2 533 Kč / pcs

Milling machine for making corner joints or continuous joints for gluing.

Code: C95550411

CMT C955 fréza na spoje 90° D44,5x18, stopka 8 mm, tvrdokov HW

2 407 Kč –4 %

CMT C955 joint cutter 90°

(1 pcs)

2 287 Kč / pcs

Milling machine for making corner joints or continuous joints for gluing.

Code: C95500911

IGM zaoblovací fréza vydutá R2, stopka 6 mm – čelní produktová fotografie s ložiskem.

733 Kč –5 %

IGM / Zaoblovací fréza vydutá R2 / stopka Ø6mm

(2 pcs)

696 Kč / pcs

Code: M13802061

IGM F044 drážkovací fréza se zavrtávací žiletkou HW Ø16, stopka 8 mm – celkový pohled

1 969 Kč –5 %

IGM | Drážkovací fréza se zavrtávací žiletkou Ø16x28,3 / stopka Ø8mm

1 870 Kč / pcs

Code: F04416381

IGM F043 ořezávací žiletková fréza s ložiskem – stopka 8 mm, detail těla se dvěma šrouby a kopírovacím ložiskem

1 678 Kč –5 %

IGM | Drážkovací žiletková fréza Ø12x50 / stopka Ø12mm

1 594 Kč / pcs

Code: F04316081

IGM žiletková ořezávací fréza s ložiskem – čelní pohled na tělo nástroje se dvěma šrouby a kopírovacím ložiskem

from 1 275 Kč up to –5 %

IGM | F043 Cutting blade cutter with bearing

(1 pcs)

from 1 211 Kč / pcs

Milling machine designed for precise face milling and copying according to the template underneath. With a traditional brazed cutter, the cutting diameter is reduced against the bearing during sharpening and this causes a tooth to form. The razor cutter eliminates this phenomenon with precisely aligned exchangeable razor blades that can also be rotated. For milling Corian, it is possible to purchase a straight or tapered bearing with a plastic ring to ensure precise guidance through the material.

Code: F04319381

1 646 Kč –4 %

IGM | F463 – Stopková fréza na plochy Ø38 / stopka Ø8

(5 pcs)

1 567 Kč / pcs

Code: F46300781

IGM F043 ořezávací žiletková fréza se 2 ložisky – stopka 8 mm, Ø19, výměnná žiletka a kopírovací ložiska (horní i spodní)

1 545 Kč –5 %

IGM | Ořezávací žiletková fréza se 2 ložisky Ø19×30 / stopka Ø8 mm

(1 pcs)

1 467 Kč / pcs

Code: F04319481

IGM F042 úhlová žiletková fréza 45°, stopka 8 mm – produktová fotografie s výměnnou destičkou a ložiskem.

1 471 Kč –5 %

IGM | Úhlová žiletková fréza HW 45° Ø29x8 / stopka Ø8mm (F046)

(1 pcs)

1 397 Kč / pcs

Code: F04245081

2 498 Kč –5 %

IGM F041 Drážkovací žiletková fréza

(2 pcs)

2 373 Kč / pcs

Code: F04112521

IGM F041 zavrtávací žiletková drážkovací fréza – detail těla s výměnným mininožem a stopkou

IGM F041 Drážkovací žiletková fréza 12

(1 pcs)

from 1 592 Kč / pcs

Cutter with one mini knife (razor blade) and clamping wedge.

Code: F04110021

IGM F041 Groove milling cuter

(1 pcs)

from 1 558 Kč / pcs

Cutter with one mini knife (razor blade) and clamping wedge.

Code: F04108081

IGM drážkovací žiletková fréza Ø19×12, stopka 8 mm – detail čela s upínacím šroubem a výměnnou destičkou.

1 231 Kč –5 %

IGM F043 Grooving blade cutter

(1 pcs)

1 169 Kč / pcs

Milling machine designed for precision face milling.

Code: F04319181

IGM F043 Ořezávací žiletková fréza se 2 ložisky (Fréza F 043 D19x50 2B19 L110 S=12 HM)

1 827 Kč –5 %

IGM F043 Trimming razor cutter with 2 bearings

(1 pcs)

1 735 Kč / pcs

Trimming cutter with upper and lower bearing. Double sided razor blades clamped with Torx strength screws. For precision face milling with a top milling machine or in a milling table.

Code: F04319621

IGM F043 ořezávací žiletková fréza s ložiskem – stopka 12 mm, Ø19, řezná délka 50 mm, dvojité kopírovací ložisko

1 543 Kč –5 %

IGM F043 Trimming razor cutter with two bearings

(2 pcs)

1 465 Kč / pcs

Milling machine designed for precise face milling and copying according to the template underneath. With a traditional brazed cutter, the cutting diameter is reduced against the bearing during sharpening and this causes a tooth to form. The razor cutter eliminates this phenomenon with precisely aligned exchangeable razor blades, which can also be rotated and used with up to 4 blades. For milling Corian, it is possible to purchase a straight or tapered bearing with a plastic ring to ensure precise guidance through the material.

Type F043-195xx with a cutting length of 50 mm is equipped with two copy bearings for better guidance according to the template.

Code: F04319521

IGM F044 drážkovací fréza se zavrtávací žiletkou HW Ø16, stopka 12 mm – celkový pohled

from 1 959 Kč –5 %

IGM F044 Grooving cutter with drilling blade

from 1 861 Kč / pcs

Slotting shank cutter with one drilling razor blade and one cutting razor blade. It has excellent drilling properties in hardwood and board materials (laminate, chipboard, MDF and Corian). The 20 mm diameter shank is designed for safe clamping in CNC machining centres at high feed rates. Can also be used for manual milling.

The milling cutter is equipped with a drilling razor blade, which makes it easier to drill into the material.

Code: F04416321

from 2 140 Kč –5 %

IGM F045 Drážkovací žiletková fréza

(1 pcs)

from 2 033 Kč / pcs

These cutters are designed for trimming, shaping and grooving.

For direct drilling, use type F044.

Code: F04516321

IGM F045 Drážkovací žiletková fréza s ložiskem (Fréza F 045 D16x35 B16 L80 S=8 HM)

2 050 Kč –5 %

IGM F045 Drážkovací žiletková fréza s ložiskem 12

(1 pcs)

1 947 Kč / pcs

Type F045 is designed for cutting, copying and formatting according to a template when using a template from above. For processing of board materials (laminate, DTD, MDF) or hardwood.

Code: F04519521

IGM F045 Drážkovací žiletková fréza (Fréza F 045 D16x48,3 L105 S=12 HM)

2 140 Kč –5 %

IGM F045 Groove milling cutter

(2 pcs)

2 033 Kč / pcs

These cutters are designed for trimming, shaping and grooving.

For direct drilling, use type F044.

Code: F04516381

from 1 896 Kč –5 %

IGM F045 Grooving blade cutter with bearing

(1 pcs)

from 1 801 Kč / pcs

Type F045 is designed for cutting, copying and formatting according to a template when using a template from above. For processing of board materials (laminate, DTD, MDF) or hardwood.

Code: F04519381

Technický výkres IGM žiletkové srážecí frézy 45° – rozměry D, I, L, S a úhel A

1 225 Kč –5 %

IGM F046 Chamfer bit HW

(1 pcs)

1 163 Kč / pcs

The cutter is designed for trimming and chamfering edges.

Type F046 is without bearing. Designed for manual milling and also for machine milling on CNC centres.

Code: F04645081

f047 drazkovaci ziletkova freza d12 s8 detail ziletky 01 (1)

from 1 664 Kč –5 %

IGM F047 Drážkovací žiletková fréza 12mm

(1 pcs)

from 1 580 Kč / pcs

Special blade geometry for laminate and chipboard machining. The design of the F047-123 gives a cutting depth of 40 mm even when using a 29.5x9x1.5 mm blade if you are milling multiple passes through the material. Excellent use for cutting, shaping and grooving laminate or kitchen worktops using the top router and templates. Can be used for manual milling or on CNC machining centres.

Code: F04714521

F047 drážkovací žiletková fréza Ø12 mm se stopkou 8 mm – detail žiletky a upínacích šroubů

from 1 376 Kč –5 %

IGM F047 Grooving blade cutter

(1 pcs)

from 1 307 Kč / pcs

Special blade geometry for laminate and chipboard machining. The design of the F047-123 gives a cutting depth of 40 mm even when using a 29.5x9x1.5 mm blade if you are milling multiple passes through the material. Excellent use for cutting, shaping and grooving laminate or kitchen worktops using the top router and templates. Can be used for manual milling or on CNC machining centres.

Code: F04712381

IGM F050 ořezávací žiletková fréza na lamino Ø19×49,5 se stopkou Ø12 mm – kopírovací ložisko na stopce

1 849 Kč –5 %

IGM F050 Trimming razor cutter HM for laminate

(1 pcs)

1 756 Kč / pcs

Trimming cutter with one HM rotary razor blade and copy bearing on the shank. Ideal for trimming kitchen and worktops. Suitable for machining chipboard and laminated chipboard.

Code: F05019521

Technický výkres IGM F051 V frézy 90° – D 23 mm, I 11 mm, L 60 mm, S 8 mm, úhel A 90°

684 Kč –5 %

IGM F051 HW blade cutter for V groove

(1 pcs)

649 Kč / pcs

Ideal tool for engraving and lettering. If you find the razor dull or worn, simply flip it over and use another of the sharp blades. The locking screw safely secures the razor blade and thus ensures precision work.

Code: F05123081

Radiusová žiletková fréza s vodicím ložiskem pro zaoblení hran (IGM F062, stopka 8 mm).

from 1 994 Kč up to –5 %

IGM F062 Radius blade cutter HW

(1 pcs)

from 1 895 Kč / pcs

- Replaceable razor blades made of micro-grain carbide.
- The razor blades can be rotated by 90° for a total of 4 cutting edges.
- The razor blades are fixed with special Torx screws.
- Cutter body made of high-quality steel.

The cutter is equipped with two double-edged razor blades for rounding the edges. The radius is ground on all 4 sides of the razor for maximum tool efficiency. The cutter is fitted with a razor blade with a radius of R3mm or R2mm, which is mainly used on ABS edges. It is also possible to buy a radius R1mm and R1,5 mm, which can be used to cut the edge when gluing umakarte, veneer or laminate on boards. For use on manual top milling machines.

Code: F06202081

IGM F463 | Stopková fréza na velké plochy

2 226 Kč –5 %

IGM F463 End mill for surfaces

(2 pcs)

2 114 Kč / pcs

HM surface milling cutter - D60x12 L80 S=12x50 Z3 - ideal tool for large material removal from large surfaces.

Code: F46300421

1 696 Kč –5 %

IGM F463 Mini Shank cutter for surfaces

(3 pcs)

1 611 Kč / pcs

Surface milling cutters are ideal for fast feed and large material removal rates.

Code: F46300521

Diamantová fréza ITA TOOLS DT1 pro CNC stroje - detailní boční pohled s viditelnými technickými údaji a maximálními otáčkami na stopce

2 752 Kč –19 %

ITA TOOLS | Diamantová fréza na drážky Ø4x10 / stopka Ø6mm

In stock at the supplier, availability within 7 days

2 202 Kč / pcs

Code: DT1.04.010.06.0MR

Leigh - dovetail cutter 101-8

(2 pcs)

795 Kč / pcs

The 101-8 herringbone cutter with an 8 mm clamping shank with a diameter of 12.7 mm and an angle of 10° is designed for semi-covered joints with a board thickness of 16 mm.

Code: 101-8

Leigh - dovetail cutter 112-8

(3 pcs)

795 Kč / pcs

112-8 herringbone cutter with 8 mm clamping shank, 12.7 mm diameter and 12° angle for semi-hidden joints.

For more information, see the instructions for use in the table on page 76

Code: 112-8

Leigh - dovetail cutter 120-8

(2 pcs)

795 Kč / pcs

120-8 herringbone cutter with 8 mm clamping shank, 12.7 mm diameter and 14° angle for semi-hidden joints.

For more information, see the instructions for use in the table on page 76

Code: 120-8

Leigh - dovetail cutter 128-8

(2 pcs)

799 Kč / pcs

128-8 herringbone cutter with 8 mm clamping shank, 12.7 mm diameter and 18° angle for semi-hidden joints.

For more information, see the instructions for use in the table on page 76

Code: 128-8

Leigh - dovetail cutter 50-8

(3 pcs)

795 Kč / pcs

The 50-8 herringbone cutter with 8 m clamping shank with a diameter of 6.3 mm and an angle of 8° for board thicknesses of 3-6 mm.

Code: 50-8

Leigh - dovetail cutter 60-8

(3 pcs)

795 Kč / pcs

The 60-8 herringbone cutter with an 8 mm clamping shank with a diameter of 7.9 mm and an angle of 8° for board thicknesses of 3-10 mm.

Code: 60-8

Leigh - dovetail cutter 70-8

(3 pcs)

795 Kč / pcs

The 70-8 herringbone cutter with 8 mm clamping shank with a diameter of 9.5 mm and an angle of 8° for board thicknesses of 6-13 mm.

Code: 70-8

Leigh - dovetail cutter 75-8

(3 pcs)

795 Kč / pcs

75-8 herringbone cutter with 8 mm clamping shank, diameter 11.1 mm and 8° angle for board thickness 10-16 mm.

Code: 75-8

Leigh - dovetail cutter 80-8

(2 pcs)

795 Kč / pcs

The 80-8 herringbone cutter with 8 mm clamping shank with a diameter of 12.7 mm and an angle of 8° is designed for a board thickness of 12-20 mm for open toothing or 19 mm for semi-hidden zinc plating.

Code: 80-8

Leigh - dovetail cutter 90-12

(1 pcs)

1 315 Kč / pcs

Herringbone cutter 90-12 with a 12 mm clamping shank with a diameter of 17.5 mm and an angle of 8° for board thicknesses of 16-26 mm.

Code: 90-12

Leigh - grooving cutter 140-8

(2 pcs)

769 Kč / pcs

Spline cutter 140-8 with 8 mm shank and 7.9 mm diameter for open joints

For more information, see the instructions for use in the table on page 72

Code: 140-8

Brands

Radius?

Informace k nákupu

Jsme tu pro vás

Kde nás najdete

Kontaktní údaje

We are here for you

We are here for you

Where to find us

Contact details

Stopkové frézy

Product sorting

List of products

Listing controls

Informace k nákupu

Jsme tu pro vás

Kde nás najdete

Kontaktní údaje

We are here for you

We are here for you

Where to find us

Contact details