Drážkovací stopkové frézy na dřevo

CMT | C712 Drážkovací fréza se závrtným zubem a stopkou 6 mm

from 778 Kč up to –5 %

CMT | C712 Grooving Router Bit with Brad Point, 6 mm Shank

(1 pcs)

from 739 Kč / pcs

Code: C71206011

cmt c935 falcovaci sada polodrazka obsah.jpg

2 558 Kč –5 %

CMT | C935 Half groove folding kit

2 430 Kč / pcs

Semi-slotted cutter sets allow you to make an unlimited number of cuts by setting different cutting heights on your cutter and changing the bearings on the cutter included in the set.

Code: C93550111

CMT C901 dlabací a srovnávací fréza Ø31,7×12,7, stopka 12 mm – produktová fotografie.

877 Kč –5 %

CMT | Dlabací a srovnávací fréza Ø31,7x12,7 / stopka Ø12mm

(1 pcs)

833 Kč / pcs

Code: C90181711

C174 drazkovaci frezy se zavrtnym zubem 2 web

from 906 Kč up to –5 %

CMT | Drážkovací a závrtávací fréza / stopka Ø12mm

from 860 Kč / pcs

CMT cutters have long-lasting HM blades, are precision sharpened, and are suitable for milling softwood, hardwood, glulam, DTD, laminate, MDF and Corian. Also suitable for CNC machining.

The sharpening of the cutter face allows deep drilling operations.

Code: C17710011

Drážkovací stopková fréza CMT s kopírovacím ložiskem – detail nástroje

1 171 Kč –5 %

CMT | Drážkovací fréza s ložiskem Ø15x31,7 / stopka Ø6mm

(1 pcs)

1 112 Kč / pcs

Code: C71215011B

1 083 Kč –5 %

CMT | Drážkovací fréza s ložiskem Ø16x20 / stopka Ø8mm

(1 pcs)

1 028 Kč / pcs

Code: C71113011B

CMT C911 Drážkovací fréza s ložiskem (Varianta frézy D22x20 B22 S=8 HM)

1 061 Kč –5 %

CMT | Grooving Router Bit with Bearing Ø16x20 / Ø8 mm shank

(1 pcs)

1 007 Kč / pcs

Suitable for copying using a top template and for edge-guided routing – the bearing holds the path, so you cut to a clean, exact dimension without complicated fence adjustments.

Code: C91116011B

from 658 Kč up to –24 %

CMT C174 Grooving cutter

(1 pcs)

from 625 Kč / pcs

CMT cutters have long-lasting HM blades, are precision sharpened, and are suitable for milling softwood, hardwood, glulam, DTD, laminate, MDF and Corian. Also suitable for CNC machining.

The sharpening of the cutter face allows deep drilling operations.

Code: C17408011

IGM falcovací žiletková fréza H=12,7 mm, Ø34,9×12, stopka 6,35 mm – produktová fotografie s kopírovacím ložiskem.

CMT C935 Falcovací fréza na polodrážku

(1 pcs)

1 581 Kč / pcs

Code: F04935551

cmt c935 falcovaci freza polodrazka rozmery d i h.jpg

from 1 123 Kč –5 %

CMT C935 Falcovací fréza na polodrážku s dolním ložiskem 12mm

from 1 066 Kč / pcs

With the extra-long half-groove cutter (19 mm), you can even restore the grooves of old window frames for the insertion of insulated glass.

Code: C93581711

Schéma rozměrů falcovací frézy: D průměr, I výška falce, H šířka falce

from 1 014 Kč –5 %

CMT C935 Rabbeting bit

(1 pcs)

from 963 Kč / pcs

With the extra-long half-groove cutter (19 mm), you can even restore the grooves of old window frames for the insertion of insulated glass.

Code: C93531711

IGM F044 drážkovací fréza se zavrtávací žiletkou HW Ø16, stopka 8 mm – celkový pohled

1 969 Kč –5 %

IGM | Drážkovací fréza se zavrtávací žiletkou Ø16x28,3 / stopka Ø8mm

1 870 Kč / pcs

Code: F04416381

2 498 Kč –5 %

IGM F041 Drážkovací žiletková fréza

(2 pcs)

2 373 Kč / pcs

Code: F04112521

IGM F041 zavrtávací žiletková drážkovací fréza – detail těla s výměnným mininožem a stopkou

IGM F041 Drážkovací žiletková fréza 12

(1 pcs)

from 1 592 Kč / pcs

Cutter with one mini knife (razor blade) and clamping wedge.

Code: F04110021

IGM F041 Groove milling cuter

(1 pcs)

from 1 558 Kč / pcs

Cutter with one mini knife (razor blade) and clamping wedge.

Code: F04108081

IGM drážkovací žiletková fréza Ø19×12, stopka 8 mm – detail čela s upínacím šroubem a výměnnou destičkou.

1 231 Kč –5 %

IGM F043 Grooving blade cutter

(1 pcs)

1 169 Kč / pcs

Milling machine designed for precision face milling.

Code: F04319181

IGM F044 drážkovací fréza se zavrtávací žiletkou HW Ø16, stopka 12 mm – celkový pohled

from 1 959 Kč –5 %

IGM F044 Grooving cutter with drilling blade

from 1 861 Kč / pcs

Slotting shank cutter with one drilling razor blade and one cutting razor blade. It has excellent drilling properties in hardwood and board materials (laminate, chipboard, MDF and Corian). The 20 mm diameter shank is designed for safe clamping in CNC machining centres at high feed rates. Can also be used for manual milling.

The milling cutter is equipped with a drilling razor blade, which makes it easier to drill into the material.

Code: F04416321

from 2 140 Kč –5 %

IGM F045 Drážkovací žiletková fréza

(1 pcs)

from 2 033 Kč / pcs

These cutters are designed for trimming, shaping and grooving.

For direct drilling, use type F044.

Code: F04516321

IGM F045 Drážkovací žiletková fréza s ložiskem (Fréza F 045 D16x35 B16 L80 S=8 HM)

2 050 Kč –5 %

IGM F045 Drážkovací žiletková fréza s ložiskem 12

(1 pcs)

1 947 Kč / pcs

Type F045 is designed for cutting, copying and formatting according to a template when using a template from above. For processing of board materials (laminate, DTD, MDF) or hardwood.

Code: F04519521

IGM F045 Drážkovací žiletková fréza (Fréza F 045 D16x48,3 L105 S=12 HM)

2 140 Kč –5 %

IGM F045 Groove milling cutter

(2 pcs)

2 033 Kč / pcs

These cutters are designed for trimming, shaping and grooving.

For direct drilling, use type F044.

Code: F04516381

f047 drazkovaci ziletkova freza d12 s8 detail ziletky 01 (1)

from 1 664 Kč –5 %

IGM F047 Drážkovací žiletková fréza 12mm

(1 pcs)

from 1 580 Kč / pcs

Special blade geometry for laminate and chipboard machining. The design of the F047-123 gives a cutting depth of 40 mm even when using a 29.5x9x1.5 mm blade if you are milling multiple passes through the material. Excellent use for cutting, shaping and grooving laminate or kitchen worktops using the top router and templates. Can be used for manual milling or on CNC machining centres.

Code: F04714521

F047 drážkovací žiletková fréza Ø12 mm se stopkou 8 mm – detail žiletky a upínacích šroubů

from 1 376 Kč –5 %

IGM F047 Grooving blade cutter

(1 pcs)

from 1 307 Kč / pcs

Special blade geometry for laminate and chipboard machining. The design of the F047-123 gives a cutting depth of 40 mm even when using a 29.5x9x1.5 mm blade if you are milling multiple passes through the material. Excellent use for cutting, shaping and grooving laminate or kitchen worktops using the top router and templates. Can be used for manual milling or on CNC machining centres.

Code: F04712381

IGM F050 ořezávací žiletková fréza na lamino Ø19×49,5 se stopkou Ø12 mm – kopírovací ložisko na stopce

1 849 Kč –5 %

IGM F050 Trimming razor cutter HM for laminate

(1 pcs)

1 756 Kč / pcs

Trimming cutter with one HM rotary razor blade and copy bearing on the shank. Ideal for trimming kitchen and worktops. Suitable for machining chipboard and laminated chipboard.

Code: F05019521

Leigh - grooving cutter 140-8

(2 pcs)

769 Kč / pcs

Spline cutter 140-8 with 8 mm shank and 7.9 mm diameter for open joints

For more information, see the instructions for use in the table on page 72

Code: 140-8

Brands

Drážkovací frézy

Informace k nákupu

Jsme tu pro vás

Kde nás najdete

Kontaktní údaje

We are here for you

We are here for you

Where to find us

Contact details

Drážkovací frézy

Product sorting

List of products

Listing controls

Informace k nákupu

Jsme tu pro vás

Kde nás najdete

Kontaktní údaje

We are here for you

We are here for you

Where to find us

Contact details