Mafell - accessories
Adjustable grooving cutter for milling widths of 15.4 - 25 mm.
- installation grooves for underfloor heating
- grooves for wiring
Angle attachment A-WV 18 for applications up to 100 Nm of torque
anti-slip profile F-HP 6.8m to prevent movement of the rail on the material
PowerTank 18 M 5,5Ah LiHD battery
PowerTank 18 M 4Ah LiHD battery
Battery for screwdriver A 12:
- Voltage: 12 V
- Capacity: 3.5AH
Rail clamps Mafell for clamping to material
2 pieces
Simple system of connecting the guide rails (without tools, just a coin)
Milling cutter for 90°V grooves up to a depth of 8 mm (including 2 position indicators)
The stop is equipped with a scale that allows you to make precise angular cuts.
Saw blade for clean and fine cuts in DTD, LTD, HPL and other materials of this type. Also suitable for aluminium profiles and weak aluminium sheets.
Fabric sleeve for guide rails Mafell up to 1.6m long
PowerStation APS M+ Universal Charger
Cutting protection against chipping when cutting laminated boards on guide rails Mafell F-SS 3,4m
Set of guide rails, clutch, clamps and transport bag.
The set includes:
- 1 x guide rail F 80
- 1 x guide rail F 160
- 1 x angle stop F-WA
- 1 x F-VS coupler
- 2 x clamp F- SZ 100 mm
- housing for guide rail
Plasterboard milling cutter for 90°Grooves up to 15 mm deep for easy assembly of 90° corners.
- including 2 x position indicators
Multifunctional stop with additional angle scale
Parallel stop (can be used as table extension by turning 180°) including wing screws
applicable for all circular saws except KKS 300 and KSP 40
Parallel stop K 85-PA (can be used as an extension of the saw table when rotated 180°)
Parallel stop incl. for straight saw P1 cc incl. trimmer for 68 mm holes.
Submersible saw guide bar, length 1.1 m
Guide rail for plunge saws and other saws Mafell, or Bosch in length 1,6m
Chip guard for straight saw P1 cc - pack of 5
Protective insert for eccentric grinders. When using abrasive grids that have different Velcro characteristics. The abrasive holds better and also reduces wear on the grinding wheel.
Protective insert when using a grinding grid
- 10 x perforated,
- size 115 x 230 mm
UVA Protective Insert - SA D Delta 105
Quick-release angled attachment for small screwdriver A 12
Quick-release bit holder for the new A 12, A 18 and ASB 18 screwdrivers.
Quick-release eccentric attachment for small screwdriver A 12.
Universal chuck for A 18 series screwdrivers
clamping range 1-13 mm
Interchangeable blade for planer ZH 205 Ec
packing 1 pair
Interchangeable blades for plasterboard cutter 15 x 15 x 2.5 mm
Hard grinding plate for EVA 150 mm with Velcro for flat surfaces.
Soft sanding plate for EVA 150 mm with Velcro fastener.
Sawblade:
- 6mm width
- 4 teeth per inch
- for arc cuts
price per piece
Sawblade:
- 6mm width
- 6 teeth per inch
- suitable for arc cuts
price per piece
Sawblade:
- 8mm width
- 4 teeth per inch
- with reverse toothing for easier retraction of the belt
- for straight cuts
price per piece
Sawblade:
- 8mm width
- 4 teeth per inch
- for straight cuts
price per piece
saw blade 120 x 1.2/1.8 x 20 mm, Z 12,WZ, for longitudinal cuts in wood
Saw blade 120 x 1,2/1,8 x 20 mm, Z 24,WZ, for universal use in wood
saw blade 120 x 1.2/1.8 x 20 mm, Z 40,FZ/TR, for precision cuts in wood
Saw blade 120 x 1,2/1,8 x 20 mm, Z 40,TR for cutting laminates, aluminium, composite boards etc.
Universal saw blade for cutting wood, can handle longitudinal and transverse cuts, but the transverse cut will be of low quality.
Special CUnex W1 Wood saw blade for precise cuts in wood and board materials. Plate width 3mm tooth length 75mm tooth split 4
Scope of delivery:
1 x piece
Saw blade for MT 55 CC submersible saw suitable for longitudinal cuts or rough cutting
Saw blade for clean and fine cuts in DTD, LTD, HPL and other materials of this type. Also suitable for aluminium profiles and weak aluminium sheets.
Saw blade 162 x 1.2/1.8 x 20 mm, Z 48,WZ, for universal use in wood and board materials
Set - guide rails, clamps and connecting part:
The set includes:
- 2 x guide rail F 160 (204365)
- 1 x connecting part F-VS (204363)
- 2 x clamp F SZ 100mm (205399)
-
housing for guide rail
Set of saw blades for triple groove up to a depth of 26 mm.
- use for bent plasterboard
- curves on MDF and other board material
Filter bag for vibratory grinder UVA 115 E
- pack of 5 pcs
Snap - and done. The KSS 80 Ec and K 85 circular saws, including the NFU 50 grooving cutter, can be easily combined with the drip rail, which is supplied in 370 mm length. With just a few movements, a mobile and easy-to-use drip system is created for precise and angularly accurate cuts.
Milling adapter compatible with the LO 55 and LO 65 Ec milling machine for easy drilling of a series of holes with 32 mm pitch or parallel lines.
Battery Mafell PowerTank 36 V B 94Wh (2,6 Ah) Li-Ion
Navštivte nás na Facebooku
Vytvořil Shoptet