Wood Cutters

IGM F043 ořezávací žiletková fréza s ložiskem – stopka 8 mm, detail těla se dvěma šrouby a kopírovacím ložiskem

1 678 Kč –5 %

IGM | Drážkovací žiletková fréza Ø12x50 / stopka Ø12mm

(1 pcs)

1 594 Kč / pcs

Code: F04316081

IGM žiletková ořezávací fréza s ložiskem – čelní pohled na tělo nástroje se dvěma šrouby a kopírovacím ložiskem

from 1 255 Kč up to –5 %

IGM | F043 Cutting blade cutter with bearing

(1 pcs)

from 1 192 Kč / pcs

Milling machine designed for precise face milling and copying according to the template underneath. With a traditional brazed cutter, the cutting diameter is reduced against the bearing during sharpening and this causes a tooth to form. The razor cutter eliminates this phenomenon with precisely aligned exchangeable razor blades that can also be rotated. For milling Corian, it is possible to purchase a straight or tapered bearing with a plastic ring to ensure precise guidance through the material.

Code: F04319381

IGM F043 ořezávací žiletková fréza s ložiskem – stopka 12 mm, Ø19, řezná délka 50 mm, dvojité kopírovací ložisko

1 543 Kč –4 %

IGM F043 Trimming razor cutter with two bearings

(1 pcs)

1 466 Kč / pcs

Milling machine designed for precise face milling and copying according to the template underneath. With a traditional brazed cutter, the cutting diameter is reduced against the bearing during sharpening and this causes a tooth to form. The razor cutter eliminates this phenomenon with precisely aligned exchangeable razor blades, which can also be rotated and used with up to 4 blades. For milling Corian, it is possible to purchase a straight or tapered bearing with a plastic ring to ensure precise guidance through the material.

Type F043-195xx with a cutting length of 50 mm is equipped with two copy bearings for better guidance according to the template.

Code: F04319521

IGM F043 ořezávací žiletková fréza se 2 ložisky – stopka 8 mm, Ø19, výměnná žiletka a kopírovací ložiska (horní i spodní)

1 555 Kč –5 %

IGM | Ořezávací žiletková fréza se 2 ložisky Ø19×30 / stopka Ø8 mm

1 477 Kč / pcs

Code: F04319481

IGM F043 Ořezávací žiletková fréza se 2 ložisky (Fréza F 043 D19x50 2B19 L110 S=12 HM)

1 859 Kč –5 %

IGM F043 Trimming razor cutter with 2 bearings

1 766 Kč / pcs

Trimming cutter with upper and lower bearing. Double sided razor blades clamped with Torx strength screws. For precision face milling with a top milling machine or in a milling table.

Code: F04319621

IGM F044 drážkovací fréza se zavrtávací žiletkou HW Ø16, stopka 8 mm – celkový pohled

1 970 Kč –5 %

IGM | Drážkovací fréza se zavrtávací žiletkou Ø16x28,3 / stopka Ø8mm

(1 pcs)

1 871 Kč / pcs

Code: F04416381

IGM F044 drážkovací fréza se zavrtávací žiletkou HW Ø16, stopka 12 mm – celkový pohled

from 1 970 Kč –5 %

IGM F044 Grooving cutter with drilling blade

from 1 871 Kč / pcs

Slotting shank cutter with one drilling razor blade and one cutting razor blade. It has excellent drilling properties in hardwood and board materials (laminate, chipboard, MDF and Corian). The 20 mm diameter shank is designed for safe clamping in CNC machining centres at high feed rates. Can also be used for manual milling.

The milling cutter is equipped with a drilling razor blade, which makes it easier to drill into the material.

Code: F04416321

IGM F045 Drážkovací žiletková fréza (Fréza F 045 D16x48,3 L105 S=12 HM)

2 140 Kč –5 %

IGM F045 Groove milling cutter

(2 pcs)

2 033 Kč / pcs

These cutters are designed for trimming, shaping and grooving.

For direct drilling, use type F044.

Code: F04516381

IGM F045 Drážkovací žiletková fréza s ložiskem (Fréza F 045 D16x35 B16 L80 S=8 HM)

from 1 896 Kč –5 %

IGM F045 Grooving blade cutter with bearing

(1 pcs)

from 1 801 Kč / pcs

Type F045 is designed for cutting, copying and formatting according to a template when using a template from above. For processing of board materials (laminate, DTD, MDF) or hardwood.

Code: F04519381

Technický výkres IGM žiletkové srážecí frézy 45° – rozměry D, I, L, S a úhel A

1 225 Kč –5 %

IGM F046 Chamfer bit HW

(1 pcs)

1 163 Kč / pcs

The cutter is designed for trimming and chamfering edges.

Type F046 is without bearing. Designed for manual milling and also for machine milling on CNC centres.

Code: F04645081

Radiusová žiletková fréza s vodicím ložiskem pro zaoblení hran (IGM F062, stopka 8 mm).

from 1 994 Kč –5 %

IGM F062 Radius blade cutter HW

(1 pcs)

from 1 894 Kč / pcs

- Replaceable razor blades made of micro-grain carbide.
- The razor blades can be rotated by 90° for a total of 4 cutting edges.
- The razor blades are fixed with special Torx screws.
- Cutter body made of high-quality steel.

The cutter is equipped with two double-edged razor blades for rounding the edges. The radius is ground on all 4 sides of the razor for maximum tool efficiency. The cutter is fitted with a razor blade with a radius of R3mm or R2mm, which is mainly used on ABS edges. It is also possible to buy a radius R1mm and R1,5 mm, which can be used to cut the edge when gluing umakarte, veneer or laminate on boards. For use on manual top milling machines.

Code: F06202081

CMT C906 ořezávací fréza se šikmými zuby, stopka 8 mm, kopírovací ložisko na čele

1 176 Kč –5 %

CMT - C706 Trimming cutter, angled teeth

(1 pcs)

1 117 Kč / pcs

These new CMT cutters feature double bearing and are spiral ground allowing clean smooth cuts in many materials. You no longer have to rotate the material or move the template. Unique tool especially for milling curved shapes along the template.

Code: C90619111

CMT C906 ořezávací fréza se šikmými zuby, stopka 12 mm, kopírovací ložisko na čele

1 753 Kč –4 %

CMT - C906 Trimming cutter, angled teeth

(1 pcs)

1 666 Kč / pcs

These new CMT cutters feature double bearing and are spiral ground allowing clean smooth cuts in many materials. You no longer have to rotate the material or move the template. Unique tool especially for milling curved shapes along the template.

Code: C90669011

c906 orezavaci frzy rovne zuby s loziskem 1 web result

from 765 Kč up to –5 %

CMT / Flush Trim Router Bit, Straight Cutters Ø9.5–19 / Ø8 mm shank

(1 pcs)

from 726 Kč / pcs

Edge trimming and template-guided shape copying without “waviness” and without the need for sanding. The router bit has a guide bearing at the tip, so it follows the template/edge precisely and maintains the final dimension.

Code: C90609611

cmt c935 falcovaci sada polodrazka obsah.jpg

2 558 Kč –5 %

CMT | C935 Half groove folding kit

2 430 Kč / pcs

Semi-slotted cutter sets allow you to make an unlimited number of cuts by setting different cutting heights on your cutter and changing the bearings on the cutter included in the set.

Code: C93550111

CMT C901 dlabací a srovnávací fréza Ø31,7×12,7, stopka 12 mm – produktová fotografie.

877 Kč –5 %

CMT | Dlabací a srovnávací fréza Ø31,7x12,7 / stopka Ø12mm

(1 pcs)

833 Kč / pcs

Code: C90181711

Drážkovací stopková fréza CMT s kopírovacím ložiskem – detail nástroje

1 171 Kč –4 %

CMT | Drážkovací fréza s ložiskem Ø15x31,7 / stopka Ø6mm

(1 pcs)

1 113 Kč / pcs

Code: C71215011B

1 083 Kč –4 %

CMT | Drážkovací fréza s ložiskem Ø16x20 / stopka Ø8mm

(1 pcs)

1 029 Kč / pcs

Code: C71113011B

cmt c936 uhlova freza s loziskem stopka 8mm produkt.jpg

from 949 Kč –5 %

CMT | Fréza úkosová s ložiskem 45° Ø31,7x9,5 / stopka Ø6mm

(1 pcs)

from 901 Kč / pcs

Code: C73628011

CMT C911 Drážkovací fréza s ložiskem (Varianta frézy D22x20 B22 S=8 HM)

1 061 Kč –5 %

CMT | Grooving Router Bit with Bearing Ø16x20 / Ø8 mm shank

(1 pcs)

1 008 Kč / pcs

Suitable for copying using a top template and for edge-guided routing – the bearing holds the path, so you cut to a clean, exact dimension without complicated fence adjustments.

Code: C91116011B

CMT C706 ořezávací fréza s čelním kopírovacím ložiskem, stopka 6 mm

1 036 Kč –5 %

CMT | Ořezávací fréza rovné zuby Ø9,5–19 / stopka Ø8mm

(1 pcs)

984 Kč / pcs

Code: C70606411

CMT C937 zaoblovací fréza vypouklá s ložiskem – produktová fotografie (oranžové tělo, HW břity).

from 1 058 Kč up to –5 %

CMT | Zaoblovací fréza vypouklá R4,75–R19 / stopka Ø12mm

(1 pcs)

from 1 005 Kč / pcs

Code: C93769011

CMT C915 fréza na V drážku 90°, HW, stopka 8 mm – detail nástroje

from 739 Kč –5 %

CMT C915 Milling cutter for V-slot 90°

(1 pcs)

from 702 Kč / pcs

- Clean, perfect cuts in boards or drawer fronts
- For edge beveling
- For milling lettering

Code: C91512711

IGM falcovací žiletková fréza H=12,7 mm, Ø34,9×12, stopka 6,35 mm – produktová fotografie s kopírovacím ložiskem.

1 581 Kč –5 %

CMT C935 Falcovací fréza na polodrážku

(1 pcs)

1 502 Kč / pcs

Code: F04935551

cmt c935 falcovaci freza polodrazka rozmery d i h.jpg

from 1 123 Kč up to –5 %

CMT C935 Falcovací fréza na polodrážku s dolním ložiskem 12mm

from 1 067 Kč / pcs

With the extra-long half-groove cutter (19 mm), you can even restore the grooves of old window frames for the insertion of insulated glass.

Code: C93581711

CMT C936 úhlová fréza s kopírovacím ložiskem, stopka 8 mm – produktová fotografie (oranžová řada CMT Orange Tools).

from 928 Kč up to –5 %

CMT C936 Chamfer bit with bearing

(1 pcs)

from 882 Kč / pcs

- HM carbide teeth.
- Orange Teflon non-stick coating.
- Copy bearing.

Code: C93628011

cmt c936 uhlova freza s loziskem rozmery d s i l a.jpg

from 1 204 Kč –4 %

CMT C936 Úhlová fréza s ložiskem 12mm

(1 pcs)

from 1 144 Kč / pcs

- HM carbide teeth.
- Orange Teflon non-stick coating.
- Copy bearing.

Code: C93692011

CMT C955 fréza na rohové spoje 90°, 50,8x22,2, stopka 12 mm

from 2 666 Kč –5 %

CMT C955 12 mm

from 2 532 Kč / pcs

Milling machine for making corner joints or continuous joints for gluing.

Code: C95550411

CMT C955 fréza na spoje 90° D44,5x18, stopka 8 mm, tvrdokov HW

2 407 Kč –5 %

CMT C955 joint cutter 90°

(1 pcs)

2 286 Kč / pcs

Milling machine for making corner joints or continuous joints for gluing.

Code: C95500911

IGM zaoblovací fréza vydutá R2, stopka 6 mm – čelní produktová fotografie s ložiskem.

733 Kč –4 %

IGM / Zaoblovací fréza vydutá R2 / stopka Ø6mm

(1 pcs)

697 Kč / pcs

Code: M13802061

IGM F042 úhlová žiletková fréza 45°, stopka 8 mm – produktová fotografie s výměnnou destičkou a ložiskem.

1 471 Kč –4 %

IGM | Úhlová žiletková fréza HW 45° Ø29x8 / stopka Ø8mm (F046)

(1 pcs)

1 398 Kč / pcs

Code: F04245081

IGM drážkovací žiletková fréza Ø19×12, stopka 8 mm – detail čela s upínacím šroubem a výměnnou destičkou.

1 231 Kč –5 %

IGM F043 Grooving blade cutter

(1 pcs)

1 169 Kč / pcs

Milling machine designed for precision face milling.

Code: F04319181

2 050 Kč –5 %

IGM F045 Drážkovací žiletková fréza s ložiskem 12

(1 pcs)

1 947 Kč / pcs

Type F045 is designed for cutting, copying and formatting according to a template when using a template from above. For processing of board materials (laminate, DTD, MDF) or hardwood.

Code: F04519521

ITA Tools | Spirálová dokončovací fréza ø 8mm/32mm Z2 SB01.08.032.080.08R

1 223 Kč –10 %

ITA Tools | Spiral cutter ø 8mm/32mm Z2

In stock at the supplier, availability within 7 days

1 100 Kč / pcs

Spiral Router by ITA TOOLS (D=8 mm, Cutting Length=32 mm, Shank=8 mm). This precision tool is designed for cutting and milling solid wood, especially for grooving and profiling shapes. Thanks to the two spiral-arranged cutting edges made from premium carbide (VHM), the tool ensures perfect accuracy and an aesthetically smooth cut surface. The intelligent chip removal system directs chips upwards, keeping the workspace clean and contributing to reliable machining.

Code: SB01.08.032.080.08R

ITA Tools | Spirálová dokončovací fréza ø 12mm/52mm Z3 SC01.12.052.100.12R

2 153 Kč –5 %

ITA Tools | Spiral finishing cutter ø 12mm/52mm Z3

(1 pcs)

2 045 Kč / pcs

Spiral Router by ITA TOOLS (D=12 mm, Cutting Length=52 mm, Shank=12 mm). This precision tool is designed for cutting and milling solid wood, especially for grooving and profiling shapes. Thanks to the two spiral-arranged cutting edges made from premium carbide (VHM), the tool ensures perfect accuracy and an aesthetically smooth cut surface. The intelligent chip removal system directs chips upwards, keeping the workspace clean and contributing to reliable machining.

Code: SC01.12.052.100.12R

Brands

Cutting Diameter ø?

Cutting Length (mm)

Clamping shank

Number of Teeth

Rotation Direction

Radius?

Informace k nákupu

Jsme tu pro vás

Kde nás najdete

Kontaktní údaje

We are here for you

We are here for you

Where to find us

Contact details

Wood Cutters

Product sorting

List of products

Listing controls

Informace k nákupu

Jsme tu pro vás

Kde nás najdete

Kontaktní údaje

We are here for you

We are here for you

Where to find us

Contact details