IGM Professional

Schéma žiletky IGM N012 – čtvercová destička se sraženými hranami a středovým upínacím otvorem (pohled shora)

67 Kč –5 %

IGM - Razor blade Z4 - 12x12x1.5 UNI

(>10 pcs)

63 Kč / pcs

replacement razor blade for IGM Shank cutter HM - D60x12 L80 S=12x50 Z3

Caution cannot be used on cutter with 8 mm shank !!!!

Code: N01212045

91 Kč –5 %

IGM - N011 Razor blade Z2 - 30x12x1.5 UNI

(>10 pcs)

86 Kč / pcs

replacement razor for IGM F041 Slotted Razor Cutter - F 043: D19x30 L74 S=8 HM

35° spine angle
2 clamping holes

Code: N01130045

333 Kč –5 %

IGM - N017 Razor blade Z4 beveled 3° - 48.3x12x1.5 UNI

(3 pcs)

316 Kč / pcs

Spare razor blade for cutter F 045: D19x48,3 B19 L100 S=12 HM

Left
35° spine angle

Code: N01749545

Schéma žiletky IGM N011 30×12×1,5 – obdélníková destička se dvěma upínacími otvory (pohled shora)

110 Kč –4 %

IGM | Tvrdokovová žiletka na Lamino/MDF Z2 40×12×1,5

(4 pcs)

105 Kč / pcs

Code: N01130015

n012 ziletka tvrdokovova 50x9x1 5 3 otvory schema 01.jpg

403 Kč –4 %

IGM - N011 Žiletka Z2 - 50x12x1,5 Lamino MDF

(5 pcs)

383 Kč / pcs

Code: N01250015

Premium sukovník HW - precizní nástroj pro náročné vrtání

from 462 Kč up to –5 %

Premium HW drill bit - a precise tool for demanding drilling

(1 pcs)

from 439 Kč / pcs

The IGM | Premium Drycleaner is a proven helper for professionals and DIYers alike. For drilling precise holes in soft and hard wood, exotic woods, plywood, artificial stone, plastic and laminate. The hard-metal tips guarantee high durability and long service life.

Code: 043001000

Aktivátor CA, 200 ml, spray – Urychlete vytvrzování vašich CA lepidel

232 Kč –4 %

CA Activator, 150 ml, spray – Accelerate the curing of your CA adhesives

(6 pcs)

221 Kč / pcs

The CA Activator in a practical 150 ml aerosol can is the ideal complement for anyone working with fast-drying cyanoacrylate adhesives like Titebond Instant. This product is designed to significantly reduce curing time and ensure strong, reliable bonds even in challenging conditions where natural curing might be compromised due to low humidity, cold, or the application of a thicker adhesive layer.

Code: KAV569984EN

IGM | Náhradní žiletka (mininůž) Z4 30x5,5x1,1 UNI

159 Kč –5 %

IGM – N010 Knife Z4 – 30x5.5x1.1 Laminate MDF

(>10 pcs)

151 Kč / pcs

replacement razor for IGM F041 Grooving razor cutter - D12x30 L70 S=8 HM

Code: N01030041

553 Kč –5 %

IGM - joiner's ruler with side plate

(5 pcs)

525 Kč / pcs

Duralumin anodised ruler, wear and corrosion resistant. Clearly legible lexerized scale in 1 mm increments.

Code: MERTPR600

IGM | Značící příložník - přesnost a jednoduchost ve 3 velikostech

from 393 Kč up to –5 %

IGM - Marking T-Rule

(>10 pcs)

from 374 Kč / pcs

Precise and easy to use duralumin jib with marking holes. Use the jib to create perfect parallel lines. Insert the pencil into the corresponding hole and create a parallel line by sliding the tab along the edge of the part. You can draw a parallel line at a distance of 5 to 260 mm, depending on the length of the ruler you choose. Each hole represents 1 mm.

Code: 1520013

520 Kč –5 %

IGM - N017 Žiletka Z4 zkosená 3° - 28,3x12x1,5 UNI

494 Kč / pcs

Spare razor blade for cutter Cutter F 045: D16x35 B16 L80 S=8 HM

Left sided
35° spine angle

Code: N01729515

IGM | N034 Radiusová žiletka HW R1–R3 / MDF+

from 486 Kč up to –5 %

IGM - Hard metal radius blade MDF+

(8 pcs)

from 462 Kč / pcs

Hardmetal razor blades and semi-finished products are manufactured by TIGRA and CERATIZIT using the most modern technology of hardmetal production.

Code: N03401025

202 Kč –4 %

IGM - N010 Razor blade Z4 - 50x5.5x1.1 Laminate MDF

(>10 pcs)

192 Kč / pcs

replacement razor for IGM F041 Grooving razor cutter - F 041: D12x50 L103 S=12 HM

Code: N01050011

174 Kč –4 %

IGM - N010 Razor blade Z4 - 50x5.5x1.1 UNI

(9 pcs)

166 Kč / pcs

replacement razor for IGM F041 Grooving razor cutter - F 041: D12x50 L103 S=12 HM

Code: N01050041

175 Kč –5 %

IGM - N011 Razor blade Z2 - 50x12x1.5 Laminate MDF

(7 pcs)

166 Kč / pcs

Spare razor blade for cutter F 043: D19x50 L112 S=12 HM

35° spine angle
2 clamping holes

Code: N01150015

128 Kč –4 %

IGM - N011 Razor blade Z2 - 50x12x1.5 UNI

(>10 pcs)

122 Kč / pcs

Spare razor blade for cutter F 043: D19x50 L112 S=12 HM

35° spine angle
2 clamping holes

Code: N01150045

167 Kč –4 %

IGM - Razor Z4 - 10.5x10.5x1.5 Laminate MDF

(8 pcs)

159 Kč / pcs

Replacement razor for Mini Surface Milling Cutter HM - D35x10,5 L60 S=8x38 Z3

Code: NT13863

359 Kč –5 %

IGM / Žiletka tvrdokovová Z4 50×9×1,5 UNI

(3 pcs)

341 Kč / pcs

Code: N01250045

from 1 145 Kč –5 %

IGM | Boring Spindle for boring jig FKP656 and FKP900

from 1 087 Kč / pcs

Code: FKP101

IGM | Vrtací kolíkovací šablona FKP656 mm

FREE 6 057 Kč –5 %

IGM | Drilling doweling template FKP656 mm

(1 pcs)

5 754 Kč / pcs

Drilling jig FKP656 - is a universal drilling jig for fast and precise manual pegging of furniture parts with 32 mm Euro pitch, ensuring high productivity and accuracy.

Code: FKP656

IGM | FK650 Šablona pro spoj kuchyňských desek 650mm

3 981 Kč –5 %

IGM | FK650 Template for kitchen countertop joints 650mm

(2 pcs)

3 782 Kč / pcs

FK 650 template - simple and precise joining of kitchen countertops.

The FK 650 is the ideal solution for those who want to easily and accurately join kitchen worktops at 90° and 45° angles. Whether you're a professional craftsman or a DIYer, this template will make your job much easier and ensure perfect results.

Code: FK650

IGM | FKP900 Vrtací šablon 900mm + ZDARMA 100ks kolíků 8x35

4 706 Kč –5 %

IGM | FKP900 Drilling template 900mm + FREE 100 pcs pins 8x35

(2 pcs)

4 470 Kč / pcs

- For pegging into the surface
- Holes for affirmations in surfaces
- For shelf carriers
- For drilling handles
- For NK hinges (Hettich, Blum, Mepla, Grass and others)

Code: FKP900SET

123 Kč –4 %

IGM | Náhradní žiletka (mininůž) Z4 20×4,1×1,1 UNI

(9 pcs)

117 Kč / pcs

Code: N01020441

223 Kč –4 %

IGM | Žiletka tvrdokovová 16x28x2 / Dřevo+ (N023)

(10 pcs)

212 Kč / pcs

Code: N02314235

61 Kč –6 %

IGM | Žiletka tvrdokovová Z2 7,5x12x1,5 UNI 35° / 2 otvory

(10 pcs)

57 Kč / pcs

Code: N01107545

Schéma žiletky IGM N012 29,5×9×1,5 – obdélníková destička se sraženými hranami a dvěma upínacími otvory (pohled shora)

255 Kč –4 %

IGM | Žiletka tvrdokovová Z4 29,5×9×1,5 Lamino/MDF

(6 pcs)

243 Kč / pcs

Code: N01239915

144 Kč –4 %

IGM | Žiletka tvrdokovová Z4 29,5×9×1,5 UNI

(>10 pcs)

137 Kč / pcs

Code: N01229945

IGM N012 tvrdokovová žiletka Z4 49,5×9×1,5 – nákres destičky se 2 upínacími otvory

247 Kč –5 %

IGM | Žiletka tvrdokovová Z4 49,5x9x1,5 / Lamino MDF (N012)

(7 pcs)

234 Kč / pcs

Code: N01249915

IGM falcovací žiletková fréza H=12,7 mm, Ø34,9×12, stopka 6,35 mm – produktová fotografie s kopírovacím ložiskem.

1 581 Kč –5 %

CMT C935 Falcovací fréza na polodrážku

(1 pcs)

1 502 Kč / pcs

Code: F04935551

IGM F044 drážkovací fréza se zavrtávací žiletkou HW Ø16, stopka 8 mm – celkový pohled

1 970 Kč –5 %

IGM | Drážkovací fréza se zavrtávací žiletkou Ø16x28,3 / stopka Ø8mm

(1 pcs)

1 871 Kč / pcs

Code: F04416381

IGM F043 ořezávací žiletková fréza s ložiskem – stopka 8 mm, detail těla se dvěma šrouby a kopírovacím ložiskem

1 678 Kč –5 %

IGM | Drážkovací žiletková fréza Ø12x50 / stopka Ø12mm

(1 pcs)

1 594 Kč / pcs

Code: F04316081

IGM žiletková ořezávací fréza s ložiskem – čelní pohled na tělo nástroje se dvěma šrouby a kopírovacím ložiskem

from 1 255 Kč up to –5 %

IGM | F043 Cutting blade cutter with bearing

(1 pcs)

from 1 192 Kč / pcs

Milling machine designed for precise face milling and copying according to the template underneath. With a traditional brazed cutter, the cutting diameter is reduced against the bearing during sharpening and this causes a tooth to form. The razor cutter eliminates this phenomenon with precisely aligned exchangeable razor blades that can also be rotated. For milling Corian, it is possible to purchase a straight or tapered bearing with a plastic ring to ensure precise guidance through the material.

Code: F04319381

1 696 Kč –4 %

IGM | F463 – Stopková fréza na plochy Ø38 / stopka Ø8

(7 pcs)

1 612 Kč / pcs

Code: F46300781

IGM F043 ořezávací žiletková fréza se 2 ložisky – stopka 8 mm, Ø19, výměnná žiletka a kopírovací ložiska (horní i spodní)

1 555 Kč –5 %

IGM | Ořezávací žiletková fréza se 2 ložisky Ø19×30 / stopka Ø8 mm

1 477 Kč / pcs

Code: F04319481

IGM F042 úhlová žiletková fréza 45°, stopka 8 mm – produktová fotografie s výměnnou destičkou a ložiskem.

1 471 Kč –4 %

IGM | Úhlová žiletková fréza HW 45° Ø29x8 / stopka Ø8mm (F046)

(1 pcs)

1 398 Kč / pcs

Code: F04245081

2 499 Kč –5 %

IGM F041 Drážkovací žiletková fréza

(2 pcs)

2 374 Kč / pcs

Code: F04112521

IGM F041 zavrtávací žiletková drážkovací fréza – detail těla s výměnným mininožem a stopkou

from 1 701 Kč up to –5 %

IGM F041 Drážkovací žiletková fréza 12

(1 pcs)

from 1 616 Kč / pcs

Cutter with one mini knife (razor blade) and clamping wedge.

Code: F04110021

from 1 641 Kč up to –5 %

IGM F041 Groove milling cuter

(1 pcs)

from 1 559 Kč / pcs

Cutter with one mini knife (razor blade) and clamping wedge.

Code: F04108081

IGM drážkovací žiletková fréza Ø19×12, stopka 8 mm – detail čela s upínacím šroubem a výměnnou destičkou.

1 231 Kč –5 %

IGM F043 Grooving blade cutter

(1 pcs)

1 169 Kč / pcs

Milling machine designed for precision face milling.

Code: F04319181

IGM F043 Ořezávací žiletková fréza se 2 ložisky (Fréza F 043 D19x50 2B19 L110 S=12 HM)

1 859 Kč –5 %

IGM F043 Trimming razor cutter with 2 bearings

1 766 Kč / pcs

Trimming cutter with upper and lower bearing. Double sided razor blades clamped with Torx strength screws. For precision face milling with a top milling machine or in a milling table.

Code: F04319621

IGM F043 ořezávací žiletková fréza s ložiskem – stopka 12 mm, Ø19, řezná délka 50 mm, dvojité kopírovací ložisko

1 543 Kč –4 %

IGM F043 Trimming razor cutter with two bearings

(1 pcs)

1 466 Kč / pcs

Milling machine designed for precise face milling and copying according to the template underneath. With a traditional brazed cutter, the cutting diameter is reduced against the bearing during sharpening and this causes a tooth to form. The razor cutter eliminates this phenomenon with precisely aligned exchangeable razor blades, which can also be rotated and used with up to 4 blades. For milling Corian, it is possible to purchase a straight or tapered bearing with a plastic ring to ensure precise guidance through the material.

Type F043-195xx with a cutting length of 50 mm is equipped with two copy bearings for better guidance according to the template.

Code: F04319521

IGM F044 drážkovací fréza se zavrtávací žiletkou HW Ø16, stopka 12 mm – celkový pohled

from 1 970 Kč –5 %

IGM F044 Grooving cutter with drilling blade

from 1 871 Kč / pcs

Slotting shank cutter with one drilling razor blade and one cutting razor blade. It has excellent drilling properties in hardwood and board materials (laminate, chipboard, MDF and Corian). The 20 mm diameter shank is designed for safe clamping in CNC machining centres at high feed rates. Can also be used for manual milling.

The milling cutter is equipped with a drilling razor blade, which makes it easier to drill into the material.

Code: F04416321

from 2 140 Kč up to –5 %

IGM F045 Drážkovací žiletková fréza

(1 pcs)

from 2 033 Kč / pcs

These cutters are designed for trimming, shaping and grooving.

For direct drilling, use type F044.

Code: F04516321

IGM F045 Drážkovací žiletková fréza s ložiskem (Fréza F 045 D16x35 B16 L80 S=8 HM)

2 050 Kč –5 %

IGM F045 Drážkovací žiletková fréza s ložiskem 12

(1 pcs)

1 947 Kč / pcs

Type F045 is designed for cutting, copying and formatting according to a template when using a template from above. For processing of board materials (laminate, DTD, MDF) or hardwood.

Code: F04519521

IGM F045 Drážkovací žiletková fréza (Fréza F 045 D16x48,3 L105 S=12 HM)

2 140 Kč –5 %

IGM F045 Groove milling cutter

(2 pcs)

2 033 Kč / pcs

These cutters are designed for trimming, shaping and grooving.

For direct drilling, use type F044.

Code: F04516381

from 1 896 Kč –5 %

IGM F045 Grooving blade cutter with bearing

(1 pcs)

from 1 801 Kč / pcs

Type F045 is designed for cutting, copying and formatting according to a template when using a template from above. For processing of board materials (laminate, DTD, MDF) or hardwood.

Code: F04519381

Technický výkres IGM žiletkové srážecí frézy 45° – rozměry D, I, L, S a úhel A

1 225 Kč –5 %

IGM F046 Chamfer bit HW

(1 pcs)

1 163 Kč / pcs

The cutter is designed for trimming and chamfering edges.

Type F046 is without bearing. Designed for manual milling and also for machine milling on CNC centres.

Code: F04645081

f047 drazkovaci ziletkova freza d12 s8 detail ziletky 01 (1)

from 1 664 Kč up to –5 %

IGM F047 Drážkovací žiletková fréza 12mm

(1 pcs)

from 1 581 Kč / pcs

Special blade geometry for laminate and chipboard machining. The design of the F047-123 gives a cutting depth of 40 mm even when using a 29.5x9x1.5 mm blade if you are milling multiple passes through the material. Excellent use for cutting, shaping and grooving laminate or kitchen worktops using the top router and templates. Can be used for manual milling or on CNC machining centres.

Code: F04714521

F047 drážkovací žiletková fréza Ø12 mm se stopkou 8 mm – detail žiletky a upínacích šroubů

from 1 376 Kč up to –5 %

IGM F047 Grooving blade cutter

(1 pcs)

from 1 307 Kč / pcs

Special blade geometry for laminate and chipboard machining. The design of the F047-123 gives a cutting depth of 40 mm even when using a 29.5x9x1.5 mm blade if you are milling multiple passes through the material. Excellent use for cutting, shaping and grooving laminate or kitchen worktops using the top router and templates. Can be used for manual milling or on CNC machining centres.

Code: F04712381

IGM F050 ořezávací žiletková fréza na lamino Ø19×49,5 se stopkou Ø12 mm – kopírovací ložisko na stopce

1 849 Kč –5 %

IGM F050 Trimming razor cutter HM for laminate

(1 pcs)

1 756 Kč / pcs

Trimming cutter with one HM rotary razor blade and copy bearing on the shank. Ideal for trimming kitchen and worktops. Suitable for machining chipboard and laminated chipboard.

Code: F05019521

Technický výkres IGM F051 V frézy 90° – D 23 mm, I 11 mm, L 60 mm, S 8 mm, úhel A 90°

684 Kč –5 %

IGM F051 HW blade cutter for V groove

(1 pcs)

649 Kč / pcs

Ideal tool for engraving and lettering. If you find the razor dull or worn, simply flip it over and use another of the sharp blades. The locking screw safely secures the razor blade and thus ensures precision work.

Code: F05123081

Radiusová žiletková fréza s vodicím ložiskem pro zaoblení hran (IGM F062, stopka 8 mm).

from 1 994 Kč –5 %

IGM F062 Radius blade cutter HW

(1 pcs)

from 1 894 Kč / pcs

- Replaceable razor blades made of micro-grain carbide.
- The razor blades can be rotated by 90° for a total of 4 cutting edges.
- The razor blades are fixed with special Torx screws.
- Cutter body made of high-quality steel.

The cutter is equipped with two double-edged razor blades for rounding the edges. The radius is ground on all 4 sides of the razor for maximum tool efficiency. The cutter is fitted with a razor blade with a radius of R3mm or R2mm, which is mainly used on ABS edges. It is also possible to buy a radius R1mm and R1,5 mm, which can be used to cut the edge when gluing umakarte, veneer or laminate on boards. For use on manual top milling machines.