Woodworking
We offer everything you need for woodworking and furniture making from the masters of their trade - the brands Mafell, Lamello and Festool. Here you will find grinders and polishers, milling machines, saws and special joinery and carpentry tools. A good quality wood planer will also come in handy.
List of products
Extremely versatile. Extremely accurate. Extremely easy to handle: whether hand-guided or on a guide rail, the OF 1010 R top milling machine is the ideal tool for fine milling.
Rounding, chamfering, fluting and edge profiling. Milling curves and cut-outs with the multi-purpose milling jig. With guide system for milling grooves on rear walls or recessing of clamping rails. Milling grooves for Schallex, Kältefeind or automatic door and window seals with the milling tool. Milling of mineral materials (max. (45 mm cutters).
Specialist in final grinding.
Finishing sanding of paint, wood and plastics. Pre-grinding before polishing. Finishing grinding of mineral materials. Final sanding of high gloss surfaces before polishing. Final sanding of wooden surfaces before waxing. Finishing grinding of fillers
Intermediate sanding and rough sanding of varnishes and sealants. For flat surfaces and curves. Finishing grinding of fillers
New Festool - ETS EC 150. With a design height of only 116 mm, brushless EC-TEC motor.
Intermediate sanding and rough sanding of varnishes and sealants. For flat surfaces and curves. Finishing grinding of fillers
Precise plunge cuts up to 55 mm material thickness. Perfect cutting of interior doors - plunge saw with guide rail. Cutting expansion joints in parquet floors and grooves. Cutting of plate material. Cutting and machining of gypsum fibre boards
Cut-outs for sinks and hobs. Lining work on furniture, kitchen units, building interiors. Cutting circles and curves. Cutting of trimming strips. Cutting workpieces. Arched cut-outs in beams
Finishing of old paints and varnishes. Sanding of wooden materials. Renovation work, e.g. stair grinding. Grinding and polishing of mineral materials. Pre-grinding and rough grinding of the sealant. Polishing without holograms
Paint and varnish finishing on window frames. Ideal for vertical surfaces or overhead work. Grinding of perforated joints. Grinding at angles, corners and edges - wherever space is at a premium. Slat grinding with a special grinding plate. Carrying out repairs to individual points in the bodywork area
Cut-outs for sinks and hobs. Lining work on furniture, kitchen units, building interiors. Cutting circles and curves. Cutting of trimming strips. Cutting workpieces. Arched cut-outs in beams. Cutting from below
Submersible saws Festool have been setting the highest bar in cutting for many decades. TS 60 K means again a new definition of this level.
Eccentric grinder with carbonless motor and speed control 6000 -10000 rpm and grinding stroke 3 mm
Eccentric grinder with carbonless motor and speed control 6000 -10000 rpm and grinding stroke 5 mm
A unique product from the brand Leigh for producing dovetail joints exactly according to your wishes.With this product you will no longer be limited by anything and you will choose exactly the size and pitch that you like
Including suction milling holder VRSD24
A unique product from Leigh for making herringbone joints exactly to your liking.With this product you will no longer be limited by anything and you will choose exactly the size and pitch that you like
Finally, dust-free milling and the perfect milling holder.It is absolutely necessary! The VRS suction and milling holder* is the perfect dust and chip collector. Its added value provides full-width support for your D4R Pro.
Do not hesitate to contact us and arrange a demonstration of the machine at your workplace.
Especially the MAFELL CUnex precision slice enables uniquely precise cuts thanks to its newly designed form.
Possibility to rent a test machine!!
Action + rail F 160
The only hand-held circular saw with pre-cutting function with the same cutting quality as stationary machines, including 160cm guide rail
Code: 91C101
Code: 91C102
The EVA 150 eccentric grinder offers you a 20% higher speed compared to other eccentric grinders. This increases performance and productivity.
The EVA 150/5 eccentric grinder offers you 20% higher speed and thus a high material removal rate. Especially suitable for large areas in woodworking.
- Cuts according to the line. The cut indicator moves automatically with the set angle.
- The cutting depth can be adjusted and locked with just one lever.
One-handed planer for professionals. With its 12,000 rpm, it provides an unusually clean and smooth surface.
The only hand-held circular saw with pre-cutting function with the same cutting quality as stationary machines.
The Mafell MT 55 plunge-cut saw is a highly precise multi-talent: it can handle plunge, mitre, and angle cuts without chipping. It cuts particleboard, Multiplex, multilayer and three-layer materials, OSB, gypsum board, cement board, plywood as accurately as it cuts engineered wood, Plexiglas, aluminum, aluminum profiles, laminate and flooring.
Want to experience versatility in a whole new dimension? Then get acquainted with LO 55. Its exemplary handling makes it ideal for all work in the workshop or on the assembly line. See the many possible uses and unleash your creativity.
Want to experience versatility in a whole new dimension? Then get acquainted with LO 55. Its exemplary handling makes it ideal for all work in the workshop or on the assembly line. See the many possible uses and unleash your creativity.
Laminating milling machine for all types of wooden slats
This tool is perfect for DIYers but also for professional woodworkers looking for a saw with high precision and flexibility.
Not flat. Not circular. Simply FESTOOL DOMINO, domino pins combine all the advantages of pins and slats. Fastest connection of large workpieces with pin sizes up to 14x140mm.
Fast rounding and chamfering of prisms, door frames and panels. Face milling of plywood and mouldings.
Milling of solid wood, acrylic and PVC sheets. Beveling, rounding and edge profiling. Grooving with side stop.
Milling of solid wood, acrylic and PVC sheets. Beveling, rounding and edge profiling. Grooving with side stop.
Edge milling machine specially for face milling and rounding of overlapping edges. The unique ball-bearing brake guarantees perfect, streak-free work results.
Fluting, grooving and profiling. Milling large cutouts, circles and curves with the multi-purpose milling jig. Production of corner joints of worktops with template for worktop joints. Milling grooves for door seals and automatic window and door seals.
Ergonomic, light and handy - with the CARVEX you will work comfortably in any position. And fast: with 3,800 strokes per minute for unrivalled breakthrough power and unsurpassed curve cutting.
Longitudinal and transverse cuts up to a material thickness of 85 mm. Versatile use for mitre cuts up to 60°. Cutting of beams, wooden beams and planks. Cutting of board materials, fibreboard insulation materials and sandwich panels
One-handed grinding of shaped and arched parts, e.g. wooden and plastic parts. Ideal for vertical surfaces or overhead work. Finishing grinding and polishing or pre-grinding of small surfaces. Disturbance of crosswalks at repair locations. Grinding different materials close to the edges
The best eccentric grinder for finishing surface grinding thanks to its 3 mm grinding stroke.
Variant in paper box without systainer.
The ETS 150/5 eccentric sander is the ideal sander for sanding between paintwork and with a stroke of 5 mm achieves the best surface quality with optimum removal performance.
Variant in paper box without systainer.
New Festool - ETS EC 150. With a design height of only 116 mm, brushless EC-TEC motor.
New Festool - ETS EC 150. With a design height of only 116 mm, brushless EC-TEC motor.
Electric hand planer HL 850 - the only planer that can endlessly plan.
The Kapex KS 60 is the first compact mitre saw weighing just 17.8kg with ergonomic handles and precision bar guidance for maximum accuracy.
Extra class down to the last detail. Lead left, lead right. Even where others only pretend to.
Casting work. Assembly work. Remoulding of carcasses, cover strips, skirting boards, mouldings, doors .... Work that requires comfortable one-handed guidance.
Precise plunge cuts up to 55 mm material thickness. Perfect cutting of interior doors - plunge saw with guide rail. Cutting expansion joints in parquet floors and grooves. Cutting of plate material. Cutting and machining of gypsum fibre boards
Submersible saws Festool have been setting the highest bar in cutting for many decades. TS 60 K means again a new definition of this level.
Ergonomic, light and handy - with the CARVEX you will work comfortably in any position. And fast: with 3,800 strokes per minute for unrivalled breakthrough power and unsurpassed curve cutting.
Excellent curve cutting thanks to triple blade guide and torsion-resistant lifting bar. Easy handling thanks to Softgrip handle and ergonomic design
Fluting, grooving and profiling. Milling large cutouts, circles and curves with the multi-purpose milling jig. Production of corner joints of worktops with template for worktop joints. Milling grooves for door seals and automatic window and door seals.
Unique machine for metal surface machining and many variants of grinding attachments. The Trinoxflex becomes a pipe sander, satin sander, belt sander or brush sander.
Unique machine for metal surface machining and many variants of grinding attachments. The Trinoxflex becomes a pipe sander, satin sander, belt sander or brush sander.
Powerful eccentric grinder with carbonless motor and speed control 6000 -10000 rpm and grinding stroke 3 mm
Powerful eccentric grinder with carbonless motor and speed control 6000 -10000 rpm and grinding stroke 5 mm
The Flex PE 14-3 125 polisher has a wide speed range of 1100 - 3700 rpm.
Unleash your imagination when making furniture with our unique machine Lamello ZETA P 2 , which will fulfill almost every wish. The invisible and demountable furniture joints of our P-system will surprise you with endless application possibilities.
Technical data: power: 705 W, Voltage: 120 and 230 V, Speed: 10 000 rpm, 6-tooth carbide cutter: 100 x 4 x 22 mm, Teeth: Z6 (3+3), Maximum groove depth: 20 mm, Weight: 3.1 kg. Standard accessories included.
The swivel belt guide allows right-angled cuts up to 90 mm deep without the second belt cutting into the material.
Carpentry planer with a cutting width of 248 mm
The largest carpentry planer Mafell with a 320 mm span.
Four saws in one - hand saw, bar-guided saw with movable guard, plunge saw and expansion joint saw.
Possibility to test the demonstration machine at our shop.
Patented adjustment system with spring-loaded pins in the base plate. Proven double-hole technology prevents workpieces from turning against each other.
- As the world's first circular saw with bottom pull, ERIKA has been a symbol of mobile cutting since its introduction. After almost 40 years of experience, the current generation is now equipped with everything users need and expect from a modern circular saw with bottom pull.
The NFU 50 grooving machine can be used flexibly and is versatile for various types of milling in wooden structures. Extensive special accessories expand the possibilities of use in everyday work.
The fixed, quick-clamping connection of the handsaw to the KSS 300 guide rail creates a highly functional, one-handed drip system for cuts at different angles. After each cut, the spring returns the saw back to the starting position.
The fixed, quick-clamping connection of the handsaw to the KSS 300 guide rail creates a highly functional, one-handed drip system for cuts at different angles. After each cut, the spring returns the saw back to the starting position.
- The bright LED lights allow for large-scale illumination of the work area.
The quick release allows the machine to be removed from the rail in one movement. Thus it can be used as a hand-held circular saw with all the functions of the MAFELL KSP series.
Multifunctional milling machine MF 26 cc: one machine - 5 options.
Version with adjustable cutter for 15,4-25mm grooves in transport case and drip rail.
Multifunctional plasterboard milling machine. Thanks to the very simple and precise adjustment, you can mill a " V " groove for folding corners.
The best machine for grooving, cutting and bending composite boards (dibond, skybond etc.)
With this router you will achieve excellent results with materials such as: solid wood, MDF, plasterboard, aluminium composite boards, sandwich materials (skybond, dibond). Folding corners in aluminium composite panels.
One-handed planer for professionals. With its 12,000 rpm, it provides an unusually clean and smooth surface.
Vytvořil Shoptet