Viking Arm - manual hoist - capacity 150 kg
Code: 0008Related products
Viking Arm - Protective non-slip jaw on the upper movable part.
- the pad is equipped with an anti-slip layer
- protects delicate surfaces from damage
- expands the possibilities of using your Viking Armat
- especially useful for assembly work
- designed for the upper movable part Viking Armu
- smallest mounting height with bases fitted 22 mm
Viking Arm - Protective non-slip jaw on the upper movable part.
- the pad is equipped with an anti-slip layer
- protects delicate surfaces from damage
- expands the possibilities of using your Viking Armat
- especially useful for assembly work
- designed for the upper movable part Viking Armu
- minimum mounting height with base in place 15 mm
Viking Arm - new protective non-slip pad
- the pad is equipped with an anti-slip layer
- protects delicate surfaces from damage
- expands the possibilities of using your Viking Armat
- especially useful for assembly work
- designed for the bottom motherboard Viking Armu
- minimum mounting height with base in place 15 mm
Dimensions:
115 x 100 x 15 mm
Package: 1 piece
Viking Arm - replaceable jaws with a thickness of only 3 mm for particularly inaccessible areas.
Package contents:
- 1 x base 3 mm
- 1 x jaw 3 mm
RED 3 and BIG RED 3 The most accurate spirit levels on the market.
Measuring accuracy 0.30/.050 mm/m. Robust profile 900gr/m. Non-slip end caps.
Small pouch for pencils, tape measure and other small tools with metal clip for any belt or work pants.
So far only available with metal clasp !!!
Pica - Dry new innovative 3 generation automatic pencil for professional craftsmen with long life. You don't need another pencil.(video)
Its special interchangeable inks allow marking on almost any surface, whether dry or wet, shiny or rough, dusty or oily.
Quickly adjustable telescopic spreader/ support bars in lengths from 40 - 375 cm with a load capacity of 300 kg
This case has 2 pockets with adjustable bottom depth that can be secured by closing the strap for small pliers or opening to accommodate longer tools. Also includes 4 screwdriver loops, a small pocket and a tape measure clip including a pencil loop.
New - pencil + distinguishing cap for easy identification of the ink contained.
Pica - Dry new innovative 3 generation automatic pencil for professional craftsmen with long life. You don't need another pencil.(video)
Its special interchangeable inks allow marking on almost any surface, whether dry or wet, shiny or rough, dusty or oily.
NEW: Maximum precision without sharpening
The special ink diameter of only 0.9 mm is ideal for fine and precise marking without sharpening
Case for measuring instruments designed especially for electricians. Made of highly durable 6-ply fabric.
The Viking Arm® Telescopic Extension is ideal for fast, safe and accurate wall cabinet installation.
- The attachment provides 3 levels of extension and offers safe, convenient and efficient mounting options that can save professionals valuable time.
- This makes it a one-man assembly and eliminates the need for a second (or third!) person to hold an object weighing up to 50 kg in place.
- It gives the user the ability to work independently and safely, smoothly and with the typical precision of the Viking Arm® tool, and to secure even heavy objects.
Neither the transport case nor the hand jack itself Viking Arm is included.
Toughbuilt - The Technician 6 Pocket Pouch Large is a durable and versatile tool case designed for professional craftsmen and DIYers.
- Made of durable six-layer construction, it has 2 pockets and 4 loops for organizing tools and accessories.
- The case is designed to be attached to a belt and is also compatible with other tool storage systems from Toughbuilt.
Pica-Dry(metal set) - precise marking in metal thanks to hard drawing needle.
Stainless steel flat scribing angle with sliding part equipped with nonium for measuring external dimensions.
Product detailed description
We only deliver the new upgraded model in 2022.
Viking Arm is a manual hoist that can lift 150 kg!
It's an invaluable helper in any installation where you'll appreciate its versatility.
It is intended for all those who work with kitchens, windows, doors, cabinets, tiles, floors, terraces, fences, etc.
All this and much more can be done easily with millimetre-controlled precision triggering thanks to the unique design of the Viking Arm.
- You can work completely by yourself, replacing the other hand.
- Lift, press, tighten with precision and control
- Impressive performance for a compact hand tool
- Patented technical solutions
- It can replace several "traditional" tools
- Inspires creativity, ensures quality and safety
- Increases productivity, saves time and money
- Robust and durable construction
- Top quality components
- 2 year warranty
See how easy it is......
What is the new VIKING ARM® about ?
- Reinforced base for greater load capacity at 6 mm.
- Improved trigger - stepping mechanism.
- It's a manual hoist that can lift 150 kg!
- It's a great helper for anyone working with kitchens, windows, doors, cabinets, wall panels, floors, patios, fences and more.
- Designed to get into small spaces, it can lift or push (between the wall and the last floorboard).
- The standard base height has been adjusted to 6 mm and still allows you to get the jack almost anywhere.
- You can even buy extra-thin feet that are only 3 mm thick and get into even smaller crevices.
- If you are laying patio boards and need to pull them up, you can Viking Arm rotate them so that they clamp instead of lifting, which can be very useful.
- When assembling kitchens, we often lift with one hand, balance the cabinet with the body and try to hold it exactly where it should be. Now with Viking Arm, the whole process is much easier. Simply lift the cabinet, adjust it to the correct height, lower it slowly and attach it if necessary.
- All this and much more can be easily performed with controlled precision thanks to the unique design of the Viking Arm.
- The work itself is much easier and more efficient.
Maintenance is also very simple
Technical data:
- Hardened stainless steel / aluminium
- Load capacity: up to 150 kg
- Working range (mm): 6-215
- Standard base (mm): 6 x 105 x 87
- Optional base (mm): 3 x 77 x 62
- Mounting holes for safe operation
- Weight: 1.4 kg
- Extensively tested by FIMTECH (Norway)
Manufactured by Viking Arm AS (Norway)
The Viking Arm tool is protected by international patent applications WO2019/160424 and WO 2020/209731
14 days to return
We ship within 24 hours
We pack the products well. If you are buying fragile goods, we make sure that the product is securely packaged.Shipping within 3 days
We offer delivery to your door and also a variant with possible personal collection in the form of dispensing points with 5000 collection points in the Czech Republic and Slovakia.Individual approach
If you have a question, feel free to call or write. We will be happy to advise and help you with the selection of goodspTxtId4415 We are experts in the fieldoru.Additional parameters
Category: | Carpentry clamps and pullers |
---|---|
Warranty: | 2 years |
Upínací rozsah: | 6-215 mm |
Viking Arm - Protective non-slip jaw on the upper movable part.
- the pad is equipped with an anti-slip layer
- protects delicate surfaces from damage
- expands the possibilities of using your Viking Armat
- especially useful for assembly work
- designed for the upper movable part Viking Armu
- minimum mounting height with base in place 15 mm
Uniform clamping of workpieces with four angle-adjustable plastic corners.
VIKING ARM® hand jacks - your universal solution for every assembly
Introducing the VIKING ARM® lifting set in the trasnport case, which will become your indispensable helper in any assembly. This set offers a wide range of applications, from kitchens and doors to floors and patios. Plus, thanks to the unique design of the Viking Arm, you can expect precise control over every movement.
Milescraft - corner clamp for perfect right-angled clamping. With a pair of eccentric quick-clamps and a massive angle, you achieve the perfect result.
For all professional joiners and craftsmen who are looking for the perfect combination of performance and precision, the SIMPLEX joiner promotional box comes to mind.
The clamps offer unusually extensive application possibilities
The corner angle set with clamps from Milescraft is the ideal helper for everyone who is not only involved in joinery. It is intuitive to use and the results are always perfectly accurate.
Viking Arm - Protective non-slip jaw on the upper movable part.
- the pad is equipped with an anti-slip layer
- protects delicate surfaces from damage
- expands the possibilities of using your Viking Armat
- especially useful for assembly work
- designed for the upper movable part Viking Armu
- smallest mounting height with bases fitted 22 mm
Pullers offer an unusually wide range of applications in joinery.
As part of Viking Arm 's efforts to innovate and provide services to professionals in their daily activities, we are introducing a new 2-pc carrying case Viking Arm.
The case contains a tool insert and a small box for spare lifting feet and spare parts.
Clamping clamp for multifunction tables with 20 mm diameter holes and a board thickness of min. 19 mm to max. 25 mm.
New from Bessey: one-hand gear clamp with guide bar clamping for narrow and otherwise confined spaces.
Introducing the revolutionary additional footings Piher, guaranteed to make the installation of your new patio easier and faster!
These specially designed feet are the ideal tool for every handyman and professional who wants to achieve the perfect result without unnecessary complications.
Easy clamping with only one hand, easy tool-free repositioning of the clamp for expansion. To release the arm, simply press the latch and turn.
Co je vlastně Viking Arm
Možnosti využití I
Možnosti využití II
Rozložení a složení
Be the first who will post an article to this item!
Be the first who will post an article to this item!