Piher - roller cutting support (pachole) with fastening to the point
Code: PI30035Related products
NEW: Maximum precision without sharpening
The special ink diameter of only 0.9 mm is ideal for fine and precise marking without sharpening
Pica - Dry new innovative 3 generation automatic pencil for professional craftsmen with long life. You don't need another pencil.(video)
Its special interchangeable inks allow marking on almost any surface, whether dry or wet, shiny or rough, dusty or oily.
Japanese transparent 3D miter angle (Two-by-Four) for 2x4" material.
Stainless steel ruler with zero points at both ends simplifies measurement readings. Two differently divided scales on one ruler, 0.5 mm pitch on the front side and 1.0 mm pitch on the back side.
Titebond Original is the best dispersion adhesive that can be used for all high strength joints of wood, laminates, DTD boards, leather, fabrics and porous materials.
Titebond Original is the best dispersion adhesive that can be used for all high strength joints of wood, laminates, DTD boards, leather, fabrics and porous materials.
Pica-Dry(metal set) - precise marking in metal thanks to hard drawing needle.
Profiler+ ® is a simple, easy-to-use drawing tool.
Any profile, any material.......transfer the contour from any surface to the material quickly and accurately
New and better: Angle adjustment accuracy is +/- 0.05. 8 angle adjustment positions in 22.5 increments (157.5 , 135 , 112 , 90 , 67.5 , 45 and 22.5 ). Folds easily for carrying in your pocket.
Robust, precise mitre angle with 45°/90°/135° jib with traditional SHAKU scale - one piece 3 mm.
ScribeTec™ from Milescraft® is a flexible marking tool, it allows you to articulate arms that adapt to any surface or contour.
Precision Japanese miter gauge Shinwa for easy and accurate measurement.
High precision Japanese aluminium 3D mitre angle 2 x 45° and 90°.
Properties: Robust, aluminium handle with wide stop. Non-glare, blue spring steel bar for pleasant work. Precision 45° and 135° mitre angle.
Sliding stop on the measuring ruler, you can measure not only the length but also the depth.
Product detailed description
No product's description available
Additional parameters
Category: | Carpentry clamps and pullers |
---|---|
Warranty: | 2 years |
Weight: | 2.72 kg |
Viking Arm - Protective non-slip jaw on the upper movable part.
- the pad is equipped with an anti-slip layer
- protects delicate surfaces from damage
- expands the possibilities of using your Viking Armat
- especially useful for assembly work
- designed for the upper movable part Viking Armu
- minimum mounting height with base in place 15 mm
- Clamping span: 160 mm
- Package contents: 1 piece
The face frame clamp can accurately clamp and tighten, pre-drill and bolt everything in one step up to a material thickness of 30 mm and a clamping width of 80-120 mm.
Piher - one-handed clamp for guide rails Festool, Makita, DeWalt and T-slots. Clamp lengths of 15 and 22 cm fit comfortably into any suitcase.
Easy clamping with only one hand, easy tool-free repositioning of the clamp for expansion. To release the arm, simply press the latch and turn.
We only deliver the new upgraded model in 2022.
- It's a manual hoist that can lift 150 kg!
- It is an invaluable helper in any assembly, you will appreciate its versatility.
- It is for all those who work with kitchens, windows, doors, cupboards, tiles, floors, terraces, fences, etc.
- All this and much more can be done easily with controlled precision triggering thanks to the unique design of the Viking Arm.
Clamping element MFT-SP (pack of 2).
The new range of powerful clamps Piher Maxipress E with a depth of 9.5 cm and a clamping force of 850 kg. New handle can be used as straight or rectangular for maximum tightening.
As part of Viking Arm 's efforts to innovate and provide services to professionals in their daily activities, we are introducing a new 2-pc carrying case Viking Arm.
The case contains a tool insert and a small box for spare lifting feet and spare parts.
Clamping clamp for multifunction tables with 20 mm diameter holes and a board thickness of min. 19 mm to max. 25 mm.
One-handed lever clamp Piher Light-Pal with nylon and fibreglass jaws, 8 cm clamping depth and 120 kg force. The advantage of the clamp is that it stands on its own.
Lightweight angle clamp for clamping workpieces of different thicknesses.
secure attachment to guide rails from manufacturers Festool, Metabo, Makita, Hikoki (Hitachi), Dewalt etc.
package content : 2pcs (1pair)
Easy clamping with only one hand, easy tool-free repositioning of the clamp for expansion. To release the arm, simply press the latch and turn.
High-performance clamps Piher Maxipress F with a depth of 12 cm and a clamping force of 900 kg. New handle can be used as straight or rectangular for maximum tightening.
Be the first who will post an article to this item!
Be the first who will post an article to this item!