Bow - replacement foam comb standard

Type F045 is designed for cutting, copying and formatting according to a template when using a template from above. For processing of board materials (laminate, DTD, MDF) or hardwood.

- Tool body made of premium steel.
- HM carbide blades.

HM surface milling cutter - D60x12 L80 S=12x50 Z3 - ideal tool for large material removal from large surfaces.

Milling machine designed for precise face milling and copying according to the template underneath. With a traditional brazed cutter, the cutting diameter is reduced against the bearing during sharpening and this causes a tooth to form. The razor cutter eliminates this phenomenon with precisely aligned exchangeable razor blades, which can also be rotated and used with up to 4 blades. For milling Corian, it is possible to purchase a straight or tapered bearing with a plastic ring to ensure precise guidance through the material.

Type F043-195xx with a cutting length of 50 mm is equipped with two copy bearings for better guidance according to the template.

- HM carbide teeth.
- Orange Teflon non-stick coating.
- Copy bearing.

Cutter with one mini knife (razor blade) and clamping wedge.

- Replaceable razor blades made of micro-grain carbide.
- The razor blades can be rotated by 90° for a total of 4 cutting edges.
- The razor blades are fixed with special Torx screws.
- Cutter body made of high-quality steel.

The cutter is equipped with two double-edged razor blades for rounding the edges. The radius is ground on all 4 sides of the razor for maximum tool efficiency. The cutter is fitted with a razor blade with a radius of R3mm or R2mm, which is mainly used on ABS edges. It is also possible to buy a radius R1mm and R1,5 mm, which can be used to cut the edge when gluing umakarte, veneer or laminate on boards. For use on manual top milling machines.