Milescraft - Grabber Plus pressure tool
Code: M3405Related products
The innovative anti-kickback pressure ridge absorbs vibrations for a better cut with maximum safety.
The revolutionary pressure safety guide for bandsaw cutting, exerts constant pressure along the vertical edge of the workpiece and adapts to changes in pressure.
The double pressure ridge with a height of up to 9 cm prevents kickback and absorbs vibrations for a better cut with maximum safety.
- Clean, perfect cuts in boards or drawer fronts
- For edge beveling
- For milling lettering
Type F045 is designed for cutting, copying and formatting according to a template when using a template from above. For processing of board materials (laminate, DTD, MDF) or hardwood.
- Replaceable razor blades made of micro-grain carbide.
- The razor blades can be rotated by 90° for a total of 4 cutting edges.
- The razor blades are fixed with special Torx screws.
- Cutter body made of high-quality steel.
The cutter is equipped with two double-edged razor blades for rounding the edges. The radius is ground on all 4 sides of the razor for maximum tool efficiency. The cutter is fitted with a razor blade with a radius of R3mm or R2mm, which is mainly used on ABS edges. It is also possible to buy a radius R1mm and R1,5 mm, which can be used to cut the edge when gluing umakarte, veneer or laminate on boards. For use on manual top milling machines.
- for trimming even the most difficult parts according to the template
- HW carbide cutting edges
- copy bearing on the cutter face
CMT cutters have long-lasting HM blades, are precision sharpened, and are suitable for milling softwood, hardwood, glulam, DTD, laminate, MDF and Corian. Also suitable for CNC machining.
The sharpening of the cutter face allows deep drilling operations.
With the extra-long half-groove cutter (19 mm), you can even restore the grooves of old window frames for the insertion of insulated glass.
The cutter is designed for trimming and chamfering edges.
Type F046 is without bearing. Designed for manual milling and also for machine milling on CNC centres.
Ideal tool for engraving and lettering. If you find the razor dull or worn, simply flip it over and use another of the sharp blades. The locking screw safely secures the razor blade and thus ensures precision work.
Special blade geometry for laminate and chipboard machining. The design of the F047-123 gives a cutting depth of 40 mm even when using a 29.5x9x1.5 mm blade if you are milling multiple passes through the material. Excellent use for cutting, shaping and grooving laminate or kitchen worktops using the top router and templates. Can be used for manual milling or on CNC machining centres.
Designed for trimming and edging.
Type F042 is equipped with a copy bearing. Designed for manual milling.
Product detailed description
Milescraft® Grabber™ Plus is a pressure guide and an important safety feature in joinery workshops.
- Rubberised seating surfaces ensure maximum contact with the workpiece.
- The rear and front feet have locking screws for adjusting the required height.
- You can of course leave the feet in the unsecured position and thanks to the springs everything works automatically.
- The ergonomic angled handle is comfortable for guiding the material while creating pressure on the machine's guide stop.
- The handle is made of soft plastic for a comfortable grip.
Additional parameters
Category: | Guide rails and woodworking aids |
---|---|
Warranty: | 2 years |
Weight: | 0.65 kg |
Guide rail for plunge saws and other saws Mafell, or Bosch in length 1,6m
Dip saw guide bar, length 0.8 m
Guide rail for plunge saws and other Mafell and Bosch saws in length 2.1m.
The innovative anti-kickback pressure ridge absorbs vibrations for a better cut with maximum safety.
Material feeder for table saw, bottom milling machine or band saw.
Milescraft SawGuide™ is not only a practical tool, but also a tool that allows you to quickly prepare your saw for different types of cuts. Straight, angled, mitre and longitudinal cuts are a breeze with it
Technical data: Length: 800 mm.
The revolutionary pressure safety guide for bandsaw cutting, exerts constant pressure along the vertical edge of the workpiece and adapts to changes in pressure.
It extends the possibility of using the pressure guide for the band saw to a table saw or bottom milling machine.
Dimensions:
width: 18.40 mm
height: 12,70 mm
length: 190 mm
Submersible saw guide bar, length 1.1 m
Great for guiding material on router tables, table saws, band saws and other joinery machines.
Přítalčné vodítko
Be the first who will post an article to this item!
Be the first who will post an article to this item!