Saw discs
When choosing a saw blade, decide on the type of saw and the material you plan to cut. In our offer you will find blades for wood, plastic, composite materials and carbide saw blades for metals. Saw blades with SK blades (made of sintered tungsten carbide) ensure constant sharpness and high blade durability.
Wood cutting discs are divided into discs suitable for cross-cut or rip cuts, or you can use universal discs for both types of cuts. Circular saw blades are suitable for firewood preparation and do not get dull even due to minor dirt.
Circular saw blades and mitre saw blades are primarily used for joinery work. But the right saw blade will turn your saw into a tool suitable for cutting plastic or metal. Special blades, such as a grooving saw blade or a pre-cutting blade that prevents burrs on the other side of the cut, are also used in the joinery workshop.
When deciding what to cut cetris boards with, give preference to diamond tooth blades. They are not subject to such rapid wear and tear.
Product sorting
List of products
CMT Orange | Saw blade ø 250x1,8/2,8x30 mm Z16 (WZ/ATB) with alternating helical teeth, for fast and efficient cuts in construction timber, soft and hard wood, including materials with occasional concrete or nails.
CMT ITK | Diamond saw blade ø 250x1,8/2,4x30 mm Z16 with alternating trapezoidal and straight teeth (TCG/TFZ), for cutting extra hard materials such as DuPont Corian®, cement-bonded and cement-fibreboard, MDF, DTD and plasterboard.
CMT Orange | Saw blade ø 250x1,8/2,8x30 mm Z16 (WZ/ATB) with alternating helical teeth, for fast and efficient cuts in construction timber, soft and hard wood, including materials with occasional concrete or nails.
Stehle | Saw blade ø 250x2.2/3.2x30 mm Z24 with alternating bevel teeth (ATB) and chip limiter is ideal for fast and clean longitudinal cuts in solid wood.
CMT | Ultra thin saw blade ø 300x1,8/2,6x30 mm Z24 WZ/ATB - ideal for longitudinal cuts in wood and wood-based materials. The alternately inclined tooth guarantees a solid cut quality.
CMT saw blade ø 210x1,8/2,8x30 mm Z24 WZ/ATB - ideal for cross and rip cuts of wood and wood-based materials. The alternately inclined tooth guarantees a solid cut quality.
Stehle | Saw blade ø 216x1.8/2.8x30 mm Z60 WZ/ATB -6°with negative tooth inclination for mitre saws. Clean cut of solid wood and wooden materials.
Stehle | Saw blade ø 216x1.8/2.8x30 mm Z60 WZ/ATB with positive tooth inclination for clean cutting of solid wood and wooden materials. Alternating ground teeth provide a clean and efficient cut without excessive heat.
Stehle | Saw blade ø 260x1.8/2.5x30 mm Z60 WZ/ATB with negative bevel for precise cross cuts on mitre saws. Reduces cutting aggressiveness, minimizes kickback and ensures a smooth, burr-free cut.
CMT Orange | Saw blade ø 260x1,8/2,8x30 mm Z28 WZ/ATB is optimized for fast and efficient longitudinal cuts of solid wood with high cutting performance.
CMT Industrial | Saw blade ø 254x1,8/2,2x30 mm Z60 WZ/ATB with negative inclination is designed for precise transverse and longitudinal cuts on mitre saws. Reduces cutting aggressiveness, minimizes kickback and ensures a smooth, burr-free cut.
CMT Orange saw blade ø 254x1,8/2,4x30 mm Z48 WZ/ATB -5° Neg is designed for precise and smooth cutting of materials. Ideal for mitre saws where the emphasis is on efficient and quality cuts without unnecessary burrs.
Stehle | Saw blade ø 216x1.8/2.8x30 mm Z30 WZ/ATB for universal cutting of solid wood and wooden materials. Alternating ground teeth provide a clean and efficient cut without excessive heat.
The CMT Orange saw blade ø 210x1,8/2,8x30 mm Z36 WZ/ATB is designed for versatile cutting of wood materials with a good combination of speed and quality. A great choice for routine cutting.
CMT Orange saw blade ø 216x1,8/2,8x30 mm Z80 TFZ/TCG is ideal for ultra-fine cuts in hard materials such as laminate, plastic and aluminium. This blade is designed for clean, burr-free finishing cuts.
CMT Orange saw blade ø 216x1,8/2,8x30 mm Z64 TCG/TFZ is designed for clean cuts in materials such as aluminium, laminate and plastic. Suitable for table and mitre saws where precise control over the cut is required.
CMT Orange saw blade ø 216x1,8/2,8x30 mm Z80 WZ/ATB -5° Neg is ideal for ultra-fine and clean final cuts. Perfect for mitre saws where maximum cut quality is required.
CMT Orange wood saw blade ø 216x1,8/2,8x30 mm Z64 WZ/ATB -5° Neg is ideal for fine and clean final cuts. Great for mitre saws where a smooth, precise, burr-free cut is required.
CMT Orange saw blade ø 216x1,8/2,8x30 mm Z48 WZ/ATB -5° Neg is designed for precise and smooth cutting of wooden materials. Ideal for mitre saws where the emphasis is on efficient and quality cuts without unnecessary burrs.
CMT | ITK diamond saw blade ø 160x1,8/2,4x20 mm Z4 TFZ/TCG (alternating trapezoidal and straight teeth) is designed for cutting extra hard materials such as cement-bonded particleboard, cement-fibreboard, DuPont Corian®, plasterboard, MDF, DTD, and various sandwich panels.
CMT | ITK diamond saw blade ø 160x1,8/2,4x20 mm Z10 TFZ/TCG (alternating trapezoidal and straight teeth) is designed for cutting extra hard materials such as cement-bonded particleboard, cement-fibreboard, DuPont Corian®, plasterboard, MDF, DTD, and various sandwich panels.
Listing controls
Frequently Asked Questions
First, find out what blade and clamping hole diameter your saw requires. This is crucial to ensure that the blade fits correctly in the saw. Next, choose a saw blade according to the material you will be cutting with it. This determines the thickness of the disc, the shape and the number of teeth. Read detailed instructions on how to choose a saw blade.
Saw blades are produced for various types of materials - wood, plastic, metal, composites, etc. To achieve a clean and accurate cut, use the appropriate gearing for the material. Wood cutting wheels have different characteristics than those designed for cutting laminate, metal or plastic. Using a suitable blade will also extend its life - there is no risk of dulling or breaking teeth.
If you are going to cut solid wood, you should consider whether it is a longitudinal cut (parallel to the grain) or a cross cut (across the grain). Crosscut saw blades have more teeth for a smooth and clean cut. On the other hand, a blade with fewer teeth is better for longitudinal cutting to make the cut faster and more efficient. We also offer saw blades for universal cutting.
The quality of the cut is mainly influenced by the thickness of the blade and the number of teeth. If you need a smooth and fine cut, choose a blade with more teeth. At the same time, choose thinner blades that do not remove as much material and are suitable for clean and precise wood cutting. For fast cutting where surface quality is not critical, a disc with fewer teeth is sufficient. For thicker materials such as wooden beams, you will get a good cut with thicker discs that do not ripple and are more stable.
When choosing how many teeth on the blade, also consider the diameter of the blade and the thickness of the material. A universal rule of thumb says that there should be at least three teeth in the frame.
A saw blade can last up to several years, depending of course on how often you cut with it. If you plan on frequent use, especially in a professional environment, it's worth investing in a blade with SK blades (carbide teeth) as they last longer and are more durable.
Also be interested in the thickness of the carbide tooth. The thicker the carbide layer, the more times you can sharpen the blade. To extend the life of the saw blade, clean it after each cut and store it in a dry place.
Vytvořil Shoptet