Piher - high-performance Maxipress clamp - E
Code: PI59020Related products
Piher - protective caps for most large clamps.
Ready to make your job easier and more accurate at the same time? Introducing CenterFinder, an innovative center marker that turns your pointing and plotting into a breeze!
New and better: Angle adjustment accuracy is +/- 0.05. 8 angle adjustment positions in 22.5 increments (157.5 , 135 , 112 , 90 , 67.5 , 45 and 22.5 ). Folds easily for carrying in your pocket.
Properties: Robust, aluminium handle with wide stop. Non-glare, blue spring steel bar for pleasant work. Precision 45° and 135° mitre angle.
Stainless steel ruler with zero points at both ends simplifies measurement readings. Two differently divided scales on one ruler, 0.5 mm pitch on the front side and 1.0 mm pitch on the back side.
Shinwa - Japanese stainless steel rulers with hard chrome finish for industrial use. On the back of the conversion table from inches to millimeters and the dimensions of the holes under the threads.
Joinery wide stainless steel flat angle has a scale on all sides.
High precision Japanese aluminium 3D mitre angle 2 x 45° and 90°.
Precision Japanese miter gauge Shinwa for easy and accurate measurement.
Accurate measurement of multiple angles: the Angle Measuring and Transferring Angle can accurately measure angles between 10 and 170 degrees.
Japanese transparent 3D miter angle (Two-by-Four) for 2x4" material.
ScribeTec™ from Milescraft® is a flexible marking tool, it allows you to articulate arms that adapt to any surface or contour.
The RED digital spirit level can be used wherever you need to quickly and accurately determine inclination, slope or angle.
Sliding stop on the measuring ruler, you can measure not only the length but also the depth.
Profiler+ ® is a simple, easy-to-use drawing tool.
Any profile, any material.......transfer the contour from any surface to the material quickly and accurately
Product detailed description
Introducing the Piher Maxipress E - the clamping master with an incredible force of 850 kg! This great helper will show you what it means to have a really tight fit.
The Maxipress E boasts an extra durable rolled steel bar with a cross section of 30 x 8 mm. Its jaws are made of high quality steel alloy and have a clamping depth of 9.5 cm. And that's not all!
A special stop on the sliding jaw prevents accidental sliding on the leash, so you don't have to worry about your item coming loose. In addition, the V-shaped cross groove in the fixed jaw allows even round objects to be clamped - yes, the Maxipress E is a truly universal tool!
The 1:2 gearing in the clamping screw together with the crank handle ensures a maximum pressure of up to 850 kg. The clamping screw is also equipped with a lubrication hole for easy maintenance.
The clamp is designed to stand on its own on the edge - so there is no need to hold it. The handle is made of high-quality plastic and is easily removable.
And to make the Maxipress E the perfect helper, you can retrofit it with plastic caps to prevent accidental damage to the clamping material.
- Extra durable rolled steel bar with a cross section of 30 x 8 mm.
- High-quality steel jaws with a clamping depth of 9.5 cm.
- A special stop on the sliding jaw prevents accidental sliding on the leash.
- The cross groove in the fixed V-shaped jaw allows you to clamp even round objects.
- 1:2 transmission in the clamping screw in combination with the crank handle for a maximum pressure of 850 kg.
- The clamping screw is equipped with a lubrication hole.
- The clamp is designed to stand on its own on the edge.
- The handle made of high-quality plastic is removable.
- Plastic caps that can be retrofitted to the clamps prevent accidental damage to the clamped material.
So what do you say? Is it time to welcome Piher Maxipress E to your workshop?
Additional parameters
Category: | Carpentry clamps and pullers |
---|---|
Warranty: | 1 year |
Bessey - 3/4" pipe diameter joiner clamp
Delivery including a threaded steel pipe with a length of 1000 mm included in the price.
If you are interested in other dimensions please contact us.
The original technical design allows you to clamp and expand with a force of up to 2000 N.
Uniform clamping of workpieces with four angle-adjustable plastic corners.
Pullers offer an unusually wide range of applications in joinery.
Lightweight angle clamp for clamping workpieces of different thicknesses.
One-handed lever clamp Piher Light-Pal with nylon and fibreglass jaws, 8 cm clamping depth and 120 kg force. The advantage of the clamp is that it stands on its own.
VIKING ARM® hand jacks - your universal solution for every assembly
Introducing the VIKING ARM® lifting set in the trasnport case, which will become your indispensable helper in any assembly. This set offers a wide range of applications, from kitchens and doors to floors and patios. Plus, thanks to the unique design of the Viking Arm, you can expect precise control over every movement.
Milescraft - corner clamp for perfect right-angled clamping. With a pair of eccentric quick-clamps and a massive angle, you achieve the perfect result.
Piher - one-handed clamp for guide rails Festool, Makita, DeWalt and T-slots. Clamp lengths of 15 and 22 cm fit comfortably into any suitcase.
- Clamping span: 160 mm
- Package contents: 1 piece
Easy clamping with only one hand, easy tool-free repositioning of the clamp for expansion. To release the arm, simply press the latch and turn.
Portable joinery vise with bottom mounted ponk.
-
Parallel double steel slider.
-
Made of nodular cast iron.
- Jaw width: 17,5 cm
- Height of jaws : 8 cm
- Max clamping (workpiece width): 20 cm
Portable joinery vice with ponk clamp.
-
Portable model for mounting on tables up to max. 52 mm plate thickness
-
Parallel double steel slider.
-
Made of nodular cast iron.
- Jaw width: 15 cm
- Height of jaws :5,5 cm
- Max clamping (workpiece width): 12 cm
Be the first who will post an article to this item!
Be the first who will post an article to this item!