Milescraft - SET - boring of extra strong materials

Type F045 is designed for cutting, copying and formatting according to a template when using a template from above. For processing of board materials (laminate, DTD, MDF) or hardwood.

Ideal tool for engraving and lettering. If you find the razor dull or worn, simply flip it over and use another of the sharp blades. The locking screw safely secures the razor blade and thus ensures precision work.

Trimming cutter with one HM rotary razor blade and copy bearing on the shank. Ideal for trimming kitchen and worktops. Suitable for machining chipboard and laminated chipboard.

With the extra-long half-groove cutter (19 mm), you can even restore the grooves of old window frames for the insertion of insulated glass.

- Clean, perfect cuts in boards or drawer fronts
- For edge beveling
- For milling lettering

HM surface milling cutter - D60x12 L80 S=12x50 Z3 - ideal tool for large material removal from large surfaces.

CMT cutters have long-lasting HM blades, are precision sharpened, and are suitable for milling softwood, hardwood, glulam, DTD, laminate, MDF and Corian. Also suitable for CNC machining.

The sharpening of the cutter face allows deep drilling operations.

- Replaceable razor blades made of micro-grain carbide.
- The razor blades can be rotated by 90° for a total of 4 cutting edges.
- The razor blades are fixed with special Torx screws.
- Cutter body made of high-quality steel.

The cutter is equipped with two double-edged razor blades for rounding the edges. The radius is ground on all 4 sides of the razor for maximum tool efficiency. The cutter is fitted with a razor blade with a radius of R3mm or R2mm, which is mainly used on ABS edges. It is also possible to buy a radius R1mm and R1,5 mm, which can be used to cut the edge when gluing umakarte, veneer or laminate on boards. For use on manual top milling machines.

Plate milling cutter without countersink, for milling grooves from 1.5 - 6 mm wide. The drift shank can be freely combined to create a groove according to your own requirements.

Use type 3 (without copy bearing) 4B (with copy bearing).

Mini Surface Milling Cutter HM - D35x10,5 L60 S=8x38 Z3

Surface milling cutters are ideal for fast feed and high material removal rates.

Milling machine designed for precise face milling and copying according to the template underneath. With a traditional brazed cutter, the cutting diameter is reduced against the bearing during sharpening and this causes a tooth to form. The razor cutter eliminates this phenomenon with precisely aligned exchangeable razor blades that can also be rotated. For milling Corian, it is possible to purchase a straight or tapered bearing with a plastic ring to ensure precise guidance through the material.

Milling cutter with one mini knife and clamping wedge. The longitudinal and transverse groove of the mini-knife allows better adjustment and security against axial movement of the knife. For milling and finishing, sequential drilling and grooving in board materials (laminate, chipboard and MDF) or hardwood or Corian. Can be used for manual milling or in CNC machining centres.