Milescraft - Pressure anti-slip guide
Code: M3403Related products
Material feeder for table saw, bottom milling machine or band saw.
The innovative anti-kickback pressure ridge absorbs vibrations for a better cut with maximum safety.
Replacement tips for the material feeder of the circular saw.
Pack of 2.
Ideal tool for engraving and lettering. If you find the razor dull or worn, simply flip it over and use another of the sharp blades. The locking screw safely secures the razor blade and thus ensures precision work.
Trimming cutter with upper and lower bearing. Double sided razor blades clamped with Torx strength screws. For precision face milling with a top milling machine or in a milling table.
CMT cutters have long-lasting HM blades, are precision sharpened, and are suitable for milling softwood, hardwood, glulam, DTD, laminate, MDF and Corian. Also suitable for CNC machining.
The sharpening of the cutter face allows deep drilling operations.
- for trimming even the most difficult parts according to the template
- HW carbide cutting edges
- copy bearing on the cutter face
Milling machine designed for precise face milling and copying according to the template underneath. With a traditional brazed cutter, the cutting diameter is reduced against the bearing during sharpening and this causes a tooth to form. The razor cutter eliminates this phenomenon with precisely aligned exchangeable razor blades that can also be rotated. For milling Corian, it is possible to purchase a straight or tapered bearing with a plastic ring to ensure precise guidance through the material.
Type F045 is designed for cutting, copying and formatting according to a template when using a template from above. For processing of board materials (laminate, DTD, MDF) or hardwood.
Milling cutter with one mini knife and clamping wedge. The longitudinal and transverse groove of the mini-knife allows better adjustment and security against axial movement of the knife. For milling and finishing, sequential drilling and grooving in board materials (laminate, chipboard and MDF) or hardwood or Corian. Can be used for manual milling or in CNC machining centres.
The cutter is designed for trimming and chamfering edges.
Type F046 is without bearing. Designed for manual milling and also for machine milling on CNC centres.
- Clean, perfect cuts in boards or drawer fronts
- For edge beveling
- For milling lettering
These new CMT cutters feature double bearing and are spiral ground allowing clean smooth cuts in many materials. You no longer have to rotate the material or move the template. Unique tool especially for milling curved shapes along the template.
Slotting shank cutter with one drilling razor blade and one cutting razor blade. It has excellent drilling properties in hardwood and board materials (laminate, chipboard, MDF and Corian). The 20 mm diameter shank is designed for safe clamping in CNC machining centres at high feed rates. Can also be used for manual milling.
The milling cutter is equipped with a drilling razor blade, which makes it easier to drill into the material.
Product detailed description
Milescraftthe ® Grabber™ is an essential safety feature in joinery workshops.
- Ergonomic angled handle for comfortable material guidance.
- Soft plastic handle for a comfortable grip.
- Excellent adhesion of the 8 x 20 cm rubberised plate to the material.
Additional parameters
Category: | Guide rails and woodworking aids |
---|---|
Warranty: | 2 years |
Weight: | 0.43 kg |
The attachment for the revolutionary pressure safety guide for bandsaw cutting, exerts constant pressure along the vertical edge of the workpiece and adapts to changes in the workpiece.
Height up to 25 cm
Special segments resembling the composition of bird feathers meet all the needs of the pressure range on the workpiece during machining.
Standard design for most operations.
Guide rail for plunge saws and other Mafell and Bosch saws in length 3.1m.
Technical data: Length: 1400 mm.
Milescraft SawGuide™ is not only a practical tool, but also a tool that allows you to quickly prepare your saw for different types of cuts. Straight, angled, mitre and longitudinal cuts are a breeze with it
It extends the possibility of using the pressure guide for the band saw to a table saw or bottom milling machine.
Dimensions:
width: 18.40 mm
height: 12,70 mm
length: 190 mm
Great for guiding material, especially for table saws, undercutters, band saws and other woodworking machines.
Great for material guiding especially for table saws, bottom mills, band saws and other woodworking machines.
Technical data: Length: 800 mm.
Dip saw guide bar, length 0.8 m
Be the first who will post an article to this item!
Be the first who will post an article to this item!