Milescraft | Boční opěrná plocha pro GrabberPRO

- HM carbide teeth.
- Orange Teflon non-stick coating.
- Copy bearing.

Type F045 is designed for cutting, copying and formatting according to a template when using a template from above. For processing of board materials (laminate, DTD, MDF) or hardwood.

Slotting shank cutter with one drilling razor blade and one cutting razor blade. It has excellent drilling properties in hardwood and board materials (laminate, chipboard, MDF and Corian). The 20 mm diameter shank is designed for safe clamping in CNC machining centres at high feed rates. Can also be used for manual milling.

The milling cutter is equipped with a drilling razor blade, which makes it easier to drill into the material.

• for trimming even the most difficult parts according to the template
• HW carbide cutting edges
• copy bearing on the cutter face

Milling machine designed for precise face milling and copying according to the template underneath. With a traditional brazed cutter, the cutting diameter is reduced against the bearing during sharpening and this causes a tooth to form. The razor cutter eliminates this phenomenon with precisely aligned exchangeable razor blades, which can also be rotated and used with up to 4 blades. For milling Corian, it is possible to purchase a straight or tapered bearing with a plastic ring to ensure precise guidance through the material.

Type F043-195xx with a cutting length of 50 mm is equipped with two copy bearings for better guidance according to the template.

- Replaceable razor blades made of micro-grain carbide.
- The razor blades can be rotated by 90° for a total of 4 cutting edges.
- The razor blades are fixed with special Torx screws.
- Cutter body made of high-quality steel.

The cutter is equipped with two double-edged razor blades for rounding the edges. The radius is ground on all 4 sides of the razor for maximum tool efficiency. The cutter is fitted with a razor blade with a radius of R3mm or R2mm, which is mainly used on ABS edges. It is also possible to buy a radius R1mm and R1,5 mm, which can be used to cut the edge when gluing umakarte, veneer or laminate on boards. For use on manual top milling machines.

Spines for plate cutters.

Special blade geometry for laminate and chipboard machining. The design of the F047-123 gives a cutting depth of 40 mm even when using a 29.5x9x1.5 mm blade if you are milling multiple passes through the material. Excellent use for cutting, shaping and grooving laminate or kitchen worktops using the top router and templates. Can be used for manual milling or on CNC machining centres.

Mandrels for disc milling machines without countersinking with bearing

- Tool body made of premium steel.
- HM carbide blades.

With the extra-long half-groove cutter (19 mm), you can even restore the grooves of old window frames for the insertion of insulated glass.