Milescraft - corner chisel
Code: M2220Related products
NEW: Maximum precision without sharpening
The special ink diameter of only 0.9 mm is ideal for fine and precise marking without sharpening
The special ink diameter of only 0.9 mm is ideal for precise marking without sharpening thanks to the hardness " H " on wood.
The special ink diameter of only 0.9 mm is ideal for precise marking without sharpening thanks to the hardness " H " on wood.
Precision Japanese miter gauge Shinwa for easy and accurate measurement.
Swanson The TC combination angle has several different uses. Precision stainless steel ruler with scale in millimeters and inches and lengths of 150, 300, 400 mm.
Trimming cutter with one HM rotary razor blade and copy bearing on the shank. Ideal for trimming kitchen and worktops. Suitable for machining chipboard and laminated chipboard.
Plate milling cutter without countersink, for milling grooves from 1.5 - 6 mm wide. The drift shank can be freely combined to create a groove according to your own requirements.
Use type 3 (without copy bearing) 4B (with copy bearing).
Milling machine designed for precise face milling and copying according to the template underneath. With a traditional brazed cutter, the cutting diameter is reduced against the bearing during sharpening and this causes a tooth to form. The razor cutter eliminates this phenomenon with precisely aligned exchangeable razor blades, which can also be rotated and used with up to 4 blades. For milling Corian, it is possible to purchase a straight or tapered bearing with a plastic ring to ensure precise guidance through the material.
Type F043-195xx with a cutting length of 50 mm is equipped with two copy bearings for better guidance according to the template.
HM surface milling cutter - D60x12 L80 S=12x50 Z3 - ideal tool for large material removal from large surfaces.
Ideal tool for engraving and lettering. If you find the razor dull or worn, simply flip it over and use another of the sharp blades. The locking screw safely secures the razor blade and thus ensures precision work.
Type F045 is designed for cutting, copying and formatting according to a template when using a template from above. For processing of board materials (laminate, DTD, MDF) or hardwood.
- Replaceable razor blades made of micro-grain carbide.
- The razor blades can be rotated by 90° for a total of 4 cutting edges.
- The razor blades are fixed with special Torx screws.
- Cutter body made of high-quality steel.
The cutter is equipped with two double-edged razor blades for rounding the edges. The radius is ground on all 4 sides of the razor for maximum tool efficiency. The cutter is fitted with a razor blade with a radius of R3mm or R2mm, which is mainly used on ABS edges. It is also possible to buy a radius R1mm and R1,5 mm, which can be used to cut the edge when gluing umakarte, veneer or laminate on boards. For use on manual top milling machines.
Special blade geometry for laminate and chipboard machining. The design of the F047-123 gives a cutting depth of 40 mm even when using a 29.5x9x1.5 mm blade if you are milling multiple passes through the material. Excellent use for cutting, shaping and grooving laminate or kitchen worktops using the top router and templates. Can be used for manual milling or on CNC machining centres.
Product detailed description
- The high-quality tungsten steel of the corner chisel is sharpened towards the centre of the milling.
- The spring ensures that the chisel is returned to the upper position so that it is ready for use immediately.
- The design of the corner chisel is absolutely ideal for cutting a rounded corner.
- Simply place a chisel in the milled-off pavement, strike it with a hammer or mallet, and then use a knife or chisel to cut the waste from the surface.
- The corner chisel guarantees a perfectly sharp corner every time.
Additional parameters
Category: | Drilling and milling jigs |
---|---|
Warranty: | 2 years |
Weight: | 0.08 kg |
Be the first who will post an article to this item!
Be the first who will post an article to this item!