Mafell
List of products
MAFELL ErgoBalance Concept:
- The cordless drilling screwdriver A 12 is optimally balanced thanks to a precise centre of gravity analysis.
- Small, ergonomic, extremely powerful.
Do not hesitate to contact us and arrange a demonstration of the machine at your workplace.
Especially the MAFELL CUnex precision slice enables uniquely precise cuts thanks to its newly designed form.
Possibility to rent a test machine!!
Action + rail F 160
The only hand-held circular saw with pre-cutting function with the same cutting quality as stationary machines, including 160cm guide rail
Code: 91C101
For extreme challenges we have the new generation A 18, which have a particularly robust construction and even more power.
For extreme challenges we have the new generation A 18, which have a particularly robust construction and even more power.
For extreme challenges we have the new generation A 18, which have a particularly robust construction and even more power.
The EVA 150 eccentric grinder offers you a 20% higher speed compared to other eccentric grinders. This increases performance and productivity.
The EVA 150/5 eccentric grinder offers you 20% higher speed and thus a high material removal rate. Especially suitable for large areas in woodworking.
- Cuts according to the line. The cut indicator moves automatically with the set angle.
- The cutting depth can be adjusted and locked with just one lever.
One-handed planer for professionals. With its 12,000 rpm, it provides an unusually clean and smooth surface.
The only hand-held circular saw with pre-cutting function with the same cutting quality as stationary machines.
The Mafell MT 55 plunge-cut saw is a highly precise multi-talent: it can handle plunge, mitre, and angle cuts without chipping. It cuts particleboard, Multiplex, multilayer and three-layer materials, OSB, gypsum board, cement board, plywood as accurately as it cuts engineered wood, Plexiglas, aluminum, aluminum profiles, laminate and flooring.
Want to experience versatility in a whole new dimension? Then get acquainted with LO 55. Its exemplary handling makes it ideal for all work in the workshop or on the assembly line. See the many possible uses and unleash your creativity.
Want to experience versatility in a whole new dimension? Then get acquainted with LO 55. Its exemplary handling makes it ideal for all work in the workshop or on the assembly line. See the many possible uses and unleash your creativity.
Guide rail for plunge saws and other Mafell and Bosch saws in length 2.1m.
Adjustable grooving cutter for milling widths of 15.4 - 25 mm.
- installation grooves for underfloor heating
- grooves for wiring
Angle attachment A-WV 18 for applications up to 100 Nm of torque
anti-slip profile F-HP 6.8m to prevent movement of the rail on the material
The swivel belt guide allows right-angled cuts up to 90 mm deep without the second belt cutting into the material.
PowerTank 18 M 5,5Ah LiHD battery
PowerTank 18 M 4Ah LiHD battery
PowerTank 18 M 8Ah LiHD battery
Battery for screwdriver A 12:
- Voltage: 12 V
- Capacity: 3.5AH
Carpentry planer with a cutting width of 248 mm
The largest carpentry planer Mafell with a 320 mm span.
Four saws in one - hand saw, bar-guided saw with movable guard, plunge saw and expansion joint saw.
Rail clamps Mafell for clamping to material
2 pieces
Simple system of connecting the guide rails (without tools, just a coin)
Milling cutter for 90°V grooves up to a depth of 8 mm (including 2 position indicators)
Possibility to test the demonstration machine at our shop.
Patented adjustment system with spring-loaded pins in the base plate. Proven double-hole technology prevents workpieces from turning against each other.
- As the world's first circular saw with bottom pull, ERIKA has been a symbol of mobile cutting since its introduction. After almost 40 years of experience, the current generation is now equipped with everything users need and expect from a modern circular saw with bottom pull.
The stop is equipped with a scale that allows you to make precise angular cuts.
Possibility to rent a test machine!!
plus saw blade 160 x 1,2/1,8 x 20 Z 32 WZ
The only hand-held circular saw with pre-cutting function with the same cutting quality as stationary machines, including 160cm guide rail
The NFU 50 grooving machine can be used flexibly and is versatile for various types of milling in wooden structures. Extensive special accessories expand the possibilities of use in everyday work.
Fabric sleeve for guide rails Mafell up to 1.6m long
PowerStation APS M+ Universal Charger
Cutting protection against chipping when cutting laminated boards on guide rails Mafell F-SS 3,4m
The fixed, quick-clamping connection of the handsaw to the KSS 300 guide rail creates a highly functional, one-handed drip system for cuts at different angles. After each cut, the spring returns the saw back to the starting position.
The fixed, quick-clamping connection of the handsaw to the KSS 300 guide rail creates a highly functional, one-handed drip system for cuts at different angles. After each cut, the spring returns the saw back to the starting position.
Set of guide rails, clutch, clamps and transport bag.
The set includes:
- 1 x guide rail F 80
- 1 x guide rail F 160
- 1 x angle stop F-WA
- 1 x F-VS coupler
- 2 x clamp F- SZ 100 mm
- housing for guide rail
- The bright LED lights allow for large-scale illumination of the work area.
Plasterboard milling cutter for 90°Grooves up to 15 mm deep for easy assembly of 90° corners.
- including 2 x position indicators
The quick release allows the machine to be removed from the rail in one movement. Thus it can be used as a hand-held circular saw with all the functions of the MAFELL KSP series.
without batteries and charger
The quick release allows the machine to be removed from the rail in one movement. Thus it can be used as a hand-held circular saw with all the functions of the MAFELL KSP series.
The quick release allows the machine to be removed from the rail in one movement. Thus it can be used as a hand-held circular saw with all the functions of the MAFELL KSP series.
Multifunctional stop with additional angle scale
Parallel stop (can be used as table extension by turning 180°) including wing screws
applicable for all circular saws except KKS 300 and KSP 40
Parallel stop K 85-PA (can be used as an extension of the saw table when rotated 180°)
Parallel stop incl. for straight saw P1 cc incl. trimmer for 68 mm holes.
Submersible saw guide bar, length 1.1 m
Guide rail for plunge saws and other saws Mafell, or Bosch in length 1,6m
Chip guard for straight saw P1 cc - pack of 5
Protective insert for eccentric grinders. When using abrasive grids that have different Velcro characteristics. The abrasive holds better and also reduces wear on the grinding wheel.
Protective insert when using a grinding grid
- 10 x perforated,
- size 115 x 230 mm
UVA Protective Insert - SA D Delta 105
Quick-release angled attachment for small screwdriver A 12
Quick-release bit holder for the new A 12, A 18 and ASB 18 screwdrivers.
Quick-release eccentric attachment for small screwdriver A 12.
Universal chuck for A 18 series screwdrivers
clamping range 1-13 mm
Interchangeable blade for planer ZH 205 Ec
packing 1 pair
Interchangeable blades for plasterboard cutter 15 x 15 x 2.5 mm
Sawblade:
- 6mm width
- 4 teeth per inch
- for arc cuts
price per piece
Sawblade:
- 6mm width
- 6 teeth per inch
- suitable for arc cuts
price per piece
Sawblade:
- 8mm width
- 4 teeth per inch
- with reverse toothing for easier retraction of the belt
- for straight cuts
price per piece
Sawblade:
- 8mm width
- 4 teeth per inch
- for straight cuts
price per piece
saw blade 120 x 1.2/1.8 x 20 mm, Z 12,WZ, for longitudinal cuts in wood
Saw blade 120 x 1,2/1,8 x 20 mm, Z 24,WZ, for universal use in wood
saw blade 120 x 1.2/1.8 x 20 mm, Z 40,FZ/TR, for precision cuts in wood
Saw blade 120 x 1,2/1,8 x 20 mm, Z 40,TR for cutting laminates, aluminium, composite boards etc.
Universal saw blade for cutting wood, can handle longitudinal and transverse cuts, but the transverse cut will be of low quality.
Special CUnex W1 Wood saw blade for precise cuts in wood and board materials. Plate width 3mm tooth length 75mm tooth split 4
Scope of delivery:
1 x piece
Saw blade for MT 55 CC submersible saw suitable for longitudinal cuts or rough cutting
Set - guide rails, clamps and connecting part:
The set includes:
- 2 x guide rail F 160 (204365)
- 1 x connecting part F-VS (204363)
- 2 x clamp F SZ 100mm (205399)
-
housing for guide rail
Set of saw blades for triple groove up to a depth of 26 mm.
- use for bent plasterboard
- curves on MDF and other board material
Filter bag for vibratory grinder UVA 115 E
- pack of 5 pcs
For extreme challenges we have the new generation A 18, which have a particularly robust construction and even more power.
EVA-ST-H backing pad from the brand Mafell for the Mafell EVA 150 random orbital sander.
The hardened design ensures high stability and durability during demanding work tasks, the Velcro system allows easy and quick sandpaper replacement.
EVA-ST-H backing pad from the brand Mafell for the Mafell EVA 150 random orbital sander.
The soft design adapts ideally to the shape of the material, ensuring even sanding even on uneven surfaces.
Snap - and done. The KSS 80 Ec and K 85 circular saws, including the NFU 50 grooving cutter, can be easily combined with the drip rail, which is supplied in 370 mm length. With just a few movements, a mobile and easy-to-use drip system is created for precise and angularly accurate cuts.
Milling adapter compatible with the LO 55 and LO 65 Ec milling machine for easy drilling of a series of holes with 32 mm pitch or parallel lines.
Multifunctional milling machine MF 26 cc: one machine - 5 options.
Version with adjustable cutter for 15,4-25mm grooves in transport case and drip rail.
Multifunctional plasterboard milling machine. Thanks to the very simple and precise adjustment, you can mill a " V " groove for folding corners.
The best machine for grooving, cutting and bending composite boards (dibond, skybond etc.)
With this router you will achieve excellent results with materials such as: solid wood, MDF, plasterboard, aluminium composite boards, sandwich materials (skybond, dibond). Folding corners in aluminium composite panels.
One-handed planer for professionals. With its 12,000 rpm, it provides an unusually clean and smooth surface.
Special CUnex W1 Wood saw blade for precise cuts in wood and board materials. Plate width 3mm tooth length 75mm tooth split 4
Scope of delivery:
1 x piece
Saw blade for clean and fine cuts in DTD, LTD, HPL and other materials of this type. Also suitable for aluminium profiles and weak aluminium sheets.
Mafell | Saw blade ø 160x1.2/1.8x20 mm Z48 TFZ/TCG is ideal for precise cutting of laminate, melamine and other board materials, minimizing burrs and ensuring high quality of the cut surface.
Mafell | PSaw blade ø 162x1.2/1.8x20 Z48 WZ/ATB for proper pre-cutting function in the MT 55 saw and precise cutting of laminate and other board materials without burrs.
We have invented a drip saw for you that works very simply and mobile. For the new KSS 40 18Mbl we have added a battery.
variant without battery and charger
We have invented a drip saw for you that works very simply and mobile. For the new KSS 40 18Mbl we have added a battery.
Battery Mafell PowerTank 36 V B 94Wh (2,6 Ah) Li-Ion
Guide stop - for drilling holes with one drill bit in small rails with a pitch of 14-48 mm.
Guide rail for plunge saws and other Mafell and Bosch saws in length 3.1m.
Interchangeable blade for ZH 245 Ec
packing 1pair
Interchangeable blade for planer ZH 320 Ec
packing 1 pair
Blades for plasterboard cutters 22 x 22 x2 mm
Saw blade for longitudinal cuts in wood or rough cutting where the quality of the cut is not important.
Lateral stop - for drilling holes to large spacing 105- 320 mm
Vytvořil Shoptet