Workshop equipment, Page 2
-
Adhesives
-
Saw blades
-
Wood Cutters
-
Wood drills and drill bits
-
Templates and preparations
-
Pencils and markers
-
Japanese hand saws
-
Japanese chisels, knives and mallets
-
Japanese planers
-
Wood material
-
Linseed oil
-
Cable clamps
-
Telescopic construction poles
-
Clamps and pullers
-
Welding clamps and clamps for welding tables
-
Ladders and steps
-
Construction sawhorses
-
Hand tools
-
Tires. tool
-
Hand staplers and stapling machines
-
Guiding systems and accessories
-
Transport systems
-
Storage systems
-
Industrial lights
.jpg)
Centipede extension from BORA to increase the height of your workstation by 15 centimetres. Just insert into the adapters and screw in. One of the main advantages of this accessory is that it doesn't affect the maximum load capacity of the centipede, so you can continue working with heavy material without worry.
Handling trolley from BORA to facilitate the transfer of plate material.
It serves as a feeder for the table saw.
The support leg can be folded to make the trolley a stable, self-supporting goat.
Maximum load capacity 159 kg.
The quick-release holder is a simple and quick way to attach centipedes BORA easily and firmly attach the worktop.
Thanks to the flexible and strong material of these clamps, worktops of different thicknesses can be attached to the centipede.
Powerful tool from the new range of joinery nailers Bostitch, for nails 1.6 mm thick with straight tray.
Widely used in joinery for attaching cabinet backs due to the width of the back of the buckle, which prevents tearing of the material.
It extends the possibility of using the pressure guide for the band saw to a table saw or bottom milling machine.
Dimensions:
width: 18.40 mm
height: 12,70 mm
length: 190 mm
Special segments resembling the composition of bird feathers meet all the needs of the pressure range on the workpiece during machining.
Standard design for most operations.
Special segments resembling the composition of bird feathers meet all the needs of the pressure range on the workpiece during machining.
Soft design for very fine machining.
Material feeder for table saw, bottom milling machine or band saw.
The double pressure ridge with a height of up to 9 cm prevents kickback and absorbs vibrations for a better cut with maximum safety.
3 practical blocks for drilling, cutting or as a support made of EVA material.
The attachment for the revolutionary pressure safety guide for bandsaw cutting, exerts constant pressure along the vertical edge of the workpiece and adapts to changes in the workpiece.
Height up to 25 cm
Replacement tips for the material feeder of the circular saw.
Pack of 2.
The CA Activator in a practical 150 ml aerosol can is the ideal complement for anyone working with fast-drying cyanoacrylate adhesives like Titebond Instant. This product is designed to significantly reduce curing time and ensure strong, reliable bonds even in challenging conditions where natural curing might be compromised due to low humidity, cold, or the application of a thicker adhesive layer.
Cable Clamp FOR | Large - Set 3 pcs
Do you have long cables and hoses in your workshop? Are they constantly untangling? Are they hard to handle?
Cable Clamps PRO Large are the perfect tools for you.
- Suitable for long extension cables, welding machines, lawn mowers, hoses.
- Designed for bundles up to 7.5 cm diameter.
- Reusable, adjustable, robust
Choose the best combination of sizes for your cables. It couldn't be easier.
Cable Clamps PRO are the perfect tools for cable organisation.
- Suitable for extension cables, garden hoses, home electronics
- Reusable, adjustable, robust
Choose the best combination of sizes for your cables. It couldn't be easier.
Cable Clamps PRO are the perfect tools for cable organisation.
- Suitable for extension cables, garden hoses, home electronics
- Reusable, adjustable, robust
Choose the best combination of sizes for your cables. It couldn't be easier.
Cable Clamps PRO are the perfect tools for cable organisation.
- Suitable for extension cables, garden hoses, home electronics
- Reusable, adjustable, robust
Choose the best combination of sizes for your cables. It couldn't be easier.
Cable Clamps PRO are the perfect tools for cable organisation.
- Suitable for extension cables, garden hoses, home electronics
- Reusable, adjustable, robust
CMT Disc for discs D100x8 d22 Z4 R30 HM
Resins, knots and other unsightly wood defects are no longer a problem. The incisions are virtually invisible thanks to the fit of the clearance boats.
Semi-slotted cutter sets allow you to make an unlimited number of cuts by setting different cutting heights on your cutter and changing the bearings on the cutter included in the set.
CMT saw blade ø 165x1,6/2,2x20 mm Z24 WZ/ATB - ideal for cross and rip cuts of wood and wood-based materials. The alternately inclined tooth guarantees a solid cut quality.
CMT saw blade ø 160x1,6/2,2x20 mm Z24 WZ/ATB - ideal for cross and rip cuts of wood and wood-based materials. The alternately inclined tooth guarantees a solid cut quality.
CMT saw blade ø 160x1,6/2,2x20 mm Z28 WZ/ATB - ideal for cross and rip cuts of wood and wood-based materials. The alternately inclined tooth guarantees a solid cut quality.
CMT saw blade ø 160x1,6/2,2x20 mm Z40 WZ/ATB - for clean cross cuts in wood and wood-based materials, alternating helical tooth ensures clean and precise cuts.
CMT saw blade ø 160x1,6/2,2x20 Z56 WZ/ATB - for ultra-clean cross-cuts in wood and wood-based materials, the alternating helical tooth ensures a perfectly clean and precise cut.
CMT CHROME | Saw blade ø 250x2,2/3,2x30 mm Z60 ATB/WZ is ideal for cross-cutting softwood and hardwood.
The CMT Laminate Wheel Set - main wheel ø 300/30 mm Z96 TCG/TFZ + pre-cutting wheel ø 120 mm Z24 Flat offers the perfect solution for cutting laminate and chipboard without burrs thanks to the combination of main and pre-cutting wheel.
CMT saw blade ø 160x1,6/2,2x20 mm Z12 WZ/ATB - ideal for longitudinal cuts in wood and wood-based materials. With 12 teeth, it allows fast and smooth cutting, but is not designed for applications where the quality of the cutting surface is important.
CMT Orange | Saw blade ø 165x1,6/2,2x20 mm Z40 WZ/ATB for precise and fine final cuts. The alternating helical teeth ensure a smooth, burr-free cutting surface, ideal for applications where high surface quality is important. The disc is suitable for various types of wood and wood-based materials.
CMT Orange XTreme | Saw blade ø 165x1,6/2,2x20 mm Z56 TFZ/TCG with trapezoidal negative teeth, ideal for clean cuts of laminated and particleboard without pre-cutting.
CMT Orange | Saw blade ø 165x1,6/2,2x20 mm Z56 TFZ/TCG (trapezoidal + straight for for precise and clean cutting of laminate, plastics and non-ferrous metals. The TCG tooth geometry minimizes burrs and ensures consistent, smooth cuts, making it the ideal tool for finishing jobs with high surface quality.
CMT Orange | Saw blade ø 190x1,6/2,8x30 mm Z64 TFZ/TCG is designed for clean and precise cuts in hard materials such as laminate, plastic and aluminium. Suitable for table and mitre saws when working with abrasive materials.
CMT Orange saw blade ø 216x1,8/2,8x30 mm Z64 TCG/TFZ is designed for clean cuts in materials such as aluminium, laminate and plastic. Suitable for table and mitre saws where precise control over the cut is required.
CMT Orange | Saw blade ø 250x2,5/3,2x30 mm Z80 TCG/TFZ negative -6° for clean cuts on laminates, plastics and non-ferrous metals with soundproof construction for quiet operation and precise cutting.
CMT Orange | Saw blade ø 254x2,5/3,2x30 mm Z80 TCG/TFZ negative for clean cuts on laminates, plastics and non-ferrous metals with soundproof construction for quiet operation and precise cutting.
CMT CHROME | Saw blade ø 250x2,2/3,2x30 mm Z40 with alternating helical teeth (ATB/WZ), chrome surface and soundproofing, ideal for longitudinal and transverse cuts of softwood and hardwood.
CMT Orange | Universal saw blade ø 190x1,6/2,6x30 mm Z24 WZ/ATB is for fast longitudinal and transverse cuts in wooden materials. It excels in its efficiency and throughput, making it ideal for rougher cutting.
CMT Orange | Saw blade ø 190x1,6/2,6x30 mm Z12 WZ/ATB is for fast longitudinal cuts in wooden materials. It excels in its efficiency and throughput, making it ideal for rough cutting.
CMT Orange | Saw blade ø 260x1,8/2,8x30 mm Z28 WZ/ATB is optimized for fast and efficient longitudinal cuts of solid wood with high cutting performance.
The CMT saw blade ø 190x1,6/2,6x20 mm Z12 WZ/ATB is ideal for fast longitudinal cuts in softwood and hardwood. With a low tooth count, it provides high cutting speed while maintaining quality.
CMT saw blade ø 210x1,8/2,8x30 mm Z24 WZ/ATB - ideal for cross and rip cuts of wood and wood-based materials. The alternately inclined tooth guarantees a solid cut quality.
CMT Orange saw blade ø 210x1,6/2,8x30 mm Z48 WZ/ATB is designed for smooth finishing cuts in wood and board materials. The perfect choice for finishing with high surface quality.
CMT Orange saw blade ø 190x1,6/2,6x30 mm Z64 WZ/ATB is ideal for ultra-fine finishing cuts in wood and board materials. A great choice for smooth surfaces and precise finishes.
CMT Orange | Saw blade ø 250x2,2/3,2x30 mm Z40 WZ/ATB for precise and smooth finishing cuts in wood and wooden boards. The perfect choice for finishing with an emphasis on surface quality.
CMT Orange | Saw blade ø 250x2,2/3,2x30 mm Z60 WZ/ATB is designed for precise and smooth finishing cuts in wood and wooden boards. The perfect choice for finishing with an emphasis on surface quality.
CMT | Ultra thin saw blade ø 300x1,8/2,6x30 mm Z24 WZ/ATB - ideal for longitudinal cuts in wood and wood-based materials. The alternately inclined tooth guarantees a solid cut quality.
CMT | ITK Ultra thin saw blade ø 250x1,6/2,4x30 mm Z80 with alternating helical teeth (ATB/WZ). High-quality saw blade with ultra-thin design for efficient cross cuts. Suitable for soft and hard wood, OSB and plywood.
CMT | ITK Ultra thin universal saw blade ø 250x1,6/2,4x30 mm Z42 with alternating helical teeth (ATB/WZ). High-quality saw blade with ultra-thin design for efficient longitudinal and transverse cuts. Suitable for soft and hard wood, OSB and plywood.
CMT | Ultra-thin saw blade ø 165x1,1/1,7x20 mm Z36 WZ/ATB - ideal for cross-cuts in wood and wood-based materials, not suitable for longitudinal cuts, except for very thin materials.
The CMT Orange saw blade ø 210x1,8/2,8x30 mm Z36 WZ/ATB is designed for versatile cutting of wood materials with a good combination of speed and quality. A great choice for routine cutting.
CMT Orange saw blade ø 216x1,8/2,8x30 mm Z48 WZ/ATB -5° Neg is designed for precise and smooth cutting of wooden materials. Ideal for mitre saws where the emphasis is on efficient and quality cuts without unnecessary burrs.
CMT Orange wood saw blade ø 216x1,8/2,8x30 mm Z64 WZ/ATB -5° Neg is ideal for fine and clean final cuts. Great for mitre saws where a smooth, precise, burr-free cut is required.
CMT Orange saw blade ø 216x1,8/2,8x30 mm Z80 WZ/ATB -5° Neg is ideal for ultra-fine and clean final cuts. Perfect for mitre saws where maximum cut quality is required.
CMT Orange saw blade ø 210x1,6/2,8x30 mm Z64 WZ/ATB is ideal for fine finishing cuts in wood and board materials. This blade provides an ultra-smooth cut for a precise, high-quality finish.
The CMT Industrial saw blade ø 300x2,2/3,2x30 mm Z72 TFZ/TCG is ideal for cutting laminate and particleboard with a clean, burr-free surface thanks to the trapezoidal tooth shape. The positive angle of the tooth face contributes to a smooth passage through the material.
CMT Industrial | Saw blade ø 300x2,2/3,2x30 mm Z36 WZ/ATB is designed for universal cutting with high surface quality and reduced noise. Suitable for a combination of longitudinal and transverse cuts with efficient sawdust removal.
CMT | ITK diamond saw blade ø 160x1,8/2,4x20 mm Z4 TFZ/TCG (alternating trapezoidal and straight teeth) is designed for cutting extra hard materials such as cement-bonded particleboard, cement-fibreboard, DuPont Corian®, plasterboard, MDF, DTD, and various sandwich panels.
CMT ITK | Diamond saw blade ø 250x1,8/2,4x30 mm Z16 with alternating trapezoidal and straight teeth (TCG/TFZ), for cutting extra hard materials such as DuPont Corian®, cement-bonded and cement-fibreboard, MDF, DTD and plasterboard.
CMT XTreme | Saw blade ø 160x1,6/2,3x20 mm Z24 WZ/ATB for demolition work is designed for maximum durability and efficiency when cutting in demanding conditions such as rebuilding and demolition projects. The blade can handle up to 20 times more cuts than competing products, thanks to its solid tooth geometry and low weight, which ensures resistance to impact with metal elements in wood, such as nails.
CMT XTreme | Saw blade ø 160x1,4/1,8x20 mm Z40 TFZ/TCG (trapezoidal + straight) for precise and clean cuts in stainless steel and other metals. The design with a combination of trapezoidal and straight teeth minimizes burrs and ensures smooth cutting of metal materials, delivering excellent results with high surface quality.
This 3-step, ground drill bit precisely follows the shape of a confirmat screw, allowing the creation of a hole for the thread, shank, and screw head. Drill bit for a confirmat screw with dimensions 7.0 x 50.0 mm is a specialized tool for efficient pre-drilling of holes in wood-based materials such as particle board, laminate, or solid wood.
Universal magnetic holder for wrist, screwdriver or other machine.
FastCap - transport wheels for easy handling of heavy or bulky materials.
FastCap - transport wheels for easy handling of heavy or bulky materials.
FastCap - Mag Shims - Magical shims for perfect adjustment of your instruments
Milling machine adapter Festool OF 2200 for use with zinc die Leigh - D4R PRO 24"
Invented and perfected by Festool: the guide rail. For cuts and grooves that will convince you with their precision. With slip pad for easy running, groove for screw and lever clamps or barrier for burr-free cuts. Since 1964, a breakthrough in precision and ease of work. The original is available in 8 different lengths from 800 to 5,000 mm.
Rudder for transporting the new generation of Systainers, T-Lock and Classic.
Festool | Saw blade ø 168x1.2/1.8x20 mm Z16 WZ mm Z16 WZ for plunge saws with a cutting width of 1.8 mm, a body thickness of 1.2 mm and a tooth face angle of 20° is ideal for fast longitudinal cuts in solid wood with minimal effort.
Festool | Saw blade ø 168x1.2/1.8x20 mm Z28 WZ for TS 60 plunge-cut saws, with a cutting width of 1.8 mm, a body thickness of 1.2 mm and a tooth face angle of 15°, is ideal for universal cutting of various wooden materials.
Festool | Saw blade ø 168x1.2/1.8x20 mm Z52 FWF with flat teeth with partial bevel, cutting width 1.8 mm, body thickness 1.2 mm and negative rake angle -5°, ideal for clean cuts in aluminum profiles and plastic materials.
Festool | Saw blade ø 168x1.2/1.8x20 mm sZ42 WD (Wood Diamond) for Festool TS 60 plunge-cut saws is ideal for clean, burr-free cross cuts in solid wood and boards with a melanin finish.
Festool | Saw blade ø 168x1.2/1.8x20 mm Z52 with trapezoidal teeth (TFZ/TCG), with a cutting width of 1.8 mm and a negative rake angle of -5°, is ideal for clean cuts in plastic materials and laminates.
The GL work light with dual system (cable + rechargeable) and lightweight and compact design is developed for professional use.
It is flexible, robust and easy to carry.
Powerful work light with COB LED and power bank function.
- Flexadjustable swivel handle for positioning at different angles and hanging.
- 3 modes (low/high/red warning light).
- Rechargeable battery via USB.
replacement razor for IGM F041 Grooving razor cutter - F 041: D12x50 L103 S=12 HM
replacement razor for IGM F041 Grooving razor cutter - D12x30 L70 S=8 HM
replacement razor for IGM F041 Slotted Razor Cutter - F 043: D19x30 L74 S=8 HM
35° spine angle
2 clamping holes
Spare razor blade for cutter F 043: D19x50 L112 S=12 HM
35° spine angle
2 clamping holes
Spare razor blade for cutter Cutter F 045: D16x35 B16 L80 S=8 HM
Left sided
35° spine angle
Spare razor blade for cutter F 045: D19x48,3 B19 L100 S=12 HM
Left
35° spine angle
replacement razor blade for IGM Shank cutter HM - D60x12 L80 S=12x50 Z3
Caution cannot be used on cutter with 8 mm shank !!!!
HM surface milling cutter - D60x12 L80 S=12x50 Z3 - ideal tool for large material removal from large surfaces.
ITA DT1 Diamond Cutter – with Straight Tooth Z1 (D=6 mm, Cutting Length=12 mm, Shank=6 mm) ITA DT1 diamond cutter is a high-performance CNC tool designed for precise groove milling in solid wood, MDF, HPL, HDF, and other materials. Featuring a single full diamond tooth and a body made of solid carbide HW with a hardness of 93.8 HRA, this tool offers exceptional cutting precision, long lifespan, and the ability to be resharpened 3-4 times. It is an ideal choice for professionals requiring a reliable and efficient tool for demanding woodworking tasks, whether on CNC machines or handheld routers.
The ITA DTA Z1+1 diamond cutter is a top-tier tool (D=10 mm, cutting length=25 mm, shank 12×40 mm) designed for precision machining of materials such as solid wood, HPL, MDF, HDF, and laminated particle boards. It is ideal for grooving and template copying. Thanks to its innovative configuration of 3 spirally arranged PCD teeth along with one HM cutting edge and a robust body, it ensures maximum cutting quality, long service life, and operational reliability.
ITA DTA.BSR – Diamond Router with Bottom Bearing Z1+1 (D=12.70 mm, Cutting Length=44 mm, Shank Size=12 mm) is a premium diamond tool designed for precise joining and routing of wood-based materials such as particle boards, MDF, HPL, and other composites. The special bottom bearing allows working with a template, significantly expanding the tool's versatility. The tool is equipped with a single solid PCD cutter, distributed into three spiral-arranged cutting edges. The body of the router, made from stainless steel (STAINLESS STEEL) with a hardness of 32 HRC or from carbide, ensures high strength and long service life. Dynamic balancing with a tolerance of G2.5 minimizes vibrations and reduces noise during operation, while the option for repeated sharpening (2–3 times) contributes to economic efficiency.
DIA Z 5+1 Router – Diamond Router (D=12 mm, Cutting Length=45 mm, Shank=12×40 mm) is a top-quality tool designed for precise jointing of kitchen countertops, grooving, and profiling of solid wood, HPL, MDF, HDF, and laminated particleboard. The tool is ideal not only for drilling and formatting materials, but also for complex woodworking operations. Thanks to spiral-arranged diamond teeth (5PCD+1HM), it achieves maximum cutting quality, long service life, and reliability.
ITA DTA Z1+1 Diamond Router (D=12 mm, Cutting Length=25 mm, Shank=12 mm) is the ideal choice for demanding woodworking applications, grooving, profiling, and cutting various materials such as solid wood, HPL, MDF, HDF, and laminated particleboard. The router body is made from stainless steel (STAINLESS STEEL), and with a right-hand rotation (RH) and an innovative configuration of 3 spiral-arranged PCD teeth with a single carbide cutting edge, it achieves maximum cutting quality, long service life, and reliability in operation.
Spiral Router by ITA TOOLS (D=8 mm, Cutting Length=32 mm, Shank=8 mm). This precision tool is designed for cutting and milling solid wood, especially for grooving and profiling shapes. Thanks to the two spiral-arranged cutting edges made from premium carbide (VHM), the tool ensures perfect accuracy and an aesthetically smooth cut surface. The intelligent chip removal system directs chips upwards, keeping the workspace clean and contributing to reliable machining.
Vytvořil Shoptet