Bow - pressure comb simple
Code: PI63100Related products
The double pressure ridge with a height of up to 9 cm prevents kickback and absorbs vibrations for a better cut with maximum safety.
Special segments resembling the composition of bird feathers meet all the needs of the pressure range on the workpiece during machining.
Standard design for most operations.
Special segments resembling the composition of bird feathers meet all the needs of the pressure range on the workpiece during machining.
Soft design for very fine machining.
High precision table saw DeWalt The DWE7492 is an improved successor to the popular DWE7491
Great for material guiding especially for table saws, bottom mills, band saws and other woodworking machines.
Great for guiding material on router tables, table saws, band saws and other joinery machines.
Great for guiding material, especially for table saws, undercutters, band saws and other woodworking machines.
Milling machine designed for precise face milling and copying according to the template underneath. With a traditional brazed cutter, the cutting diameter is reduced against the bearing during sharpening and this causes a tooth to form. The razor cutter eliminates this phenomenon with precisely aligned exchangeable razor blades, which can also be rotated and used with up to 4 blades. For milling Corian, it is possible to purchase a straight or tapered bearing with a plastic ring to ensure precise guidance through the material.
Type F043-195xx with a cutting length of 50 mm is equipped with two copy bearings for better guidance according to the template.
- Clean, perfect cuts in boards or drawer fronts
- For edge beveling
- For milling lettering
Slotting shank cutter with one drilling razor blade and one cutting razor blade. It has excellent drilling properties in hardwood and board materials (laminate, chipboard, MDF and Corian). The 20 mm diameter shank is designed for safe clamping in CNC machining centres at high feed rates. Can also be used for manual milling.
The milling cutter is equipped with a drilling razor blade, which makes it easier to drill into the material.
Special blade geometry for laminate and chipboard machining. The design of the F047-123 gives a cutting depth of 40 mm even when using a 29.5x9x1.5 mm blade if you are milling multiple passes through the material. Excellent use for cutting, shaping and grooving laminate or kitchen worktops using the top router and templates. Can be used for manual milling or on CNC machining centres.
Plate milling cutter without countersink, for milling grooves from 1.5 - 6 mm wide. The drift shank can be freely combined to create a groove according to your own requirements.
Use type 3 (without copy bearing) 4B (with copy bearing).
- Replaceable razor blades made of micro-grain carbide.
- The razor blades can be rotated by 90° for a total of 4 cutting edges.
- The razor blades are fixed with special Torx screws.
- Cutter body made of high-quality steel.
The cutter is equipped with two double-edged razor blades for rounding the edges. The radius is ground on all 4 sides of the razor for maximum tool efficiency. The cutter is fitted with a razor blade with a radius of R3mm or R2mm, which is mainly used on ABS edges. It is also possible to buy a radius R1mm and R1,5 mm, which can be used to cut the edge when gluing umakarte, veneer or laminate on boards. For use on manual top milling machines.
HM surface milling cutter - D60x12 L80 S=12x50 Z3 - ideal tool for large material removal from large surfaces.
Product detailed description
- Special segments resembling the composition of bird feathers ensure optimum pressure on the workpiece during machining.
- Safety and accuracy.
- Absorbs vibrations for a cleaner cut.
- Smooth glide at high pressure.
- The comb absorbs energy and helps to mitigate recoil.
- The comb are made of high-density EVA foam: reversible and replaceable.
- PA body itself with long life and wear resistance.
Dimensions of the line in the groove:
- height: 9 mm
- width 19 - 22 mm (e.g. table saw DeWalt DWE 7492)
Additional parameters
Category: | Guide rails and woodworking aids |
---|---|
Warranty: | 2 years |
Weight: | 0.45 kg |
Technical data: Length: 1400 mm.
Great for guiding material, especially for table saws, undercutters, band saws and other woodworking machines.
It extends the possibility of using the pressure guide for the band saw to a table saw or bottom milling machine.
Dimensions:
width: 18.40 mm
height: 12,70 mm
length: 190 mm
Milescraft SawGuide™ is not only a practical tool, but also a tool that allows you to quickly prepare your saw for different types of cuts. Straight, angled, mitre and longitudinal cuts are a breeze with it
Guide rail for plunge saws and other Mafell and Bosch saws in length 2.1m.
Special segments resembling the composition of bird feathers meet all the needs of the pressure range on the workpiece during machining.
Standard design for most operations.
Dip saw guide bar, length 0.8 m
Submersible saw guide bar, length 1.1 m
The Track Rack is a great, versatile way to safely store and transport guide rails.
Guide rail for plunge saws and other Mafell and Bosch saws in length 3.1m.
Be the first who will post an article to this item!
Be the first who will post an article to this item!