Hedue - Stair tool - spider

CMT cutters have long-lasting HM blades, are precision sharpened, and are suitable for milling softwood, hardwood, glulam, DTD, laminate, MDF and Corian. Also suitable for CNC machining.

The sharpening of the cutter face allows deep drilling operations.

The cutter is designed for trimming and chamfering edges.

Type F046 is without bearing. Designed for manual milling and also for machine milling on CNC centres.

- HM carbide teeth.
- Orange Teflon non-stick coating.
- Copy bearing.

Semi-slotted cutter sets allow you to make an unlimited number of cuts by setting different cutting heights on your cutter and changing the bearings on the cutter included in the set.

Ideal tool for engraving and lettering. If you find the razor dull or worn, simply flip it over and use another of the sharp blades. The locking screw safely secures the razor blade and thus ensures precision work.

CMT Disc for discs D100x8 d22 Z4 R30 HM

Resins, knots and other unsightly wood defects are no longer a problem. The incisions are virtually invisible thanks to the fit of the clearance boats.

- Replaceable razor blades made of micro-grain carbide.
- The razor blades can be rotated by 90° for a total of 4 cutting edges.
- The razor blades are fixed with special Torx screws.
- Cutter body made of high-quality steel.

The cutter is equipped with two double-edged razor blades for rounding the edges. The radius is ground on all 4 sides of the razor for maximum tool efficiency. The cutter is fitted with a razor blade with a radius of R3mm or R2mm, which is mainly used on ABS edges. It is also possible to buy a radius R1mm and R1,5 mm, which can be used to cut the edge when gluing umakarte, veneer or laminate on boards. For use on manual top milling machines.

Slotting shank cutter with one drilling razor blade and one cutting razor blade. It has excellent drilling properties in hardwood and board materials (laminate, chipboard, MDF and Corian). The 20 mm diameter shank is designed for safe clamping in CNC machining centres at high feed rates. Can also be used for manual milling.

The milling cutter is equipped with a drilling razor blade, which makes it easier to drill into the material.

Plate milling cutter without countersink, for milling grooves from 1.5 - 6 mm wide. The drift shank can be freely combined to create a groove according to your own requirements.

Use type 3 (without copy bearing) 4B (with copy bearing).

These new CMT cutters feature double bearing and are spiral ground allowing clean smooth cuts in many materials. You no longer have to rotate the material or move the template. Unique tool especially for milling curved shapes along the template.

With the extra-long half-groove cutter (19 mm), you can even restore the grooves of old window frames for the insertion of insulated glass.

These cutters are designed for trimming, shaping and grooving.

For direct drilling, use type F044.