Milescraft | JointPro - pinning preparation

Special blade geometry for laminate and chipboard machining. The design of the F047-123 gives a cutting depth of 40 mm even when using a 29.5x9x1.5 mm blade if you are milling multiple passes through the material. Excellent use for cutting, shaping and grooving laminate or kitchen worktops using the top router and templates. Can be used for manual milling or on CNC machining centres.

- Replaceable razor blades made of micro-grain carbide.
- The razor blades can be rotated by 90° for a total of 4 cutting edges.
- The razor blades are fixed with special Torx screws.
- Cutter body made of high-quality steel.

The cutter is equipped with two double-edged razor blades for rounding the edges. The radius is ground on all 4 sides of the razor for maximum tool efficiency. The cutter is fitted with a razor blade with a radius of R3mm or R2mm, which is mainly used on ABS edges. It is also possible to buy a radius R1mm and R1,5 mm, which can be used to cut the edge when gluing umakarte, veneer or laminate on boards. For use on manual top milling machines.

Semi-slotted cutter sets allow you to make an unlimited number of cuts by setting different cutting heights on your cutter and changing the bearings on the cutter included in the set.

Milling machine designed for precise face milling and copying according to the template underneath. With a traditional brazed cutter, the cutting diameter is reduced against the bearing during sharpening and this causes a tooth to form. The razor cutter eliminates this phenomenon with precisely aligned exchangeable razor blades that can also be rotated. For milling Corian, it is possible to purchase a straight or tapered bearing with a plastic ring to ensure precise guidance through the material.

Slotting shank cutter with one drilling razor blade and one cutting razor blade. It has excellent drilling properties in hardwood and board materials (laminate, chipboard, MDF and Corian). The 20 mm diameter shank is designed for safe clamping in CNC machining centres at high feed rates. Can also be used for manual milling.

The milling cutter is equipped with a drilling razor blade, which makes it easier to drill into the material.

Type F045 is designed for cutting, copying and formatting according to a template when using a template from above. For processing of board materials (laminate, DTD, MDF) or hardwood.

Milling machine for making corner joints or continuous joints for gluing.

Surface milling cutters are ideal for fast feed and large material removal rates.

The cutter is designed for trimming and chamfering edges.

Type F046 is without bearing. Designed for manual milling and also for machine milling on CNC centres.

CMT cutters have long-lasting HM blades, are precision sharpened, and are suitable for milling softwood, hardwood, glulam, DTD, laminate, MDF and Corian. Also suitable for CNC machining.

The sharpening of the cutter face allows deep drilling operations.

• for trimming even the most difficult parts according to the template
• HW carbide cutting edges
• copy bearing on the cutter face

Laminating disc for laminated joints - D100x3,96 d22 Z6 HM alternating tooth