Milescraft | PocketJig200t SET – tool for pocket joints

With the Milescraft blanking pin, you can easily hide or highlight the visible holes of pocket joints on various products. Insert the pin into the hole and then just sand it down so that it is flush with the surface. This pin will make your products look flawless and aesthetically appealing.

Pliers from Milescraft® are ideal for joinery work. Universal clamps are particularly suitable for use with drilling fixtures.

Cutter with one mini knife (razor blade) and clamping wedge.

Laminating disc for laminated joints - D100x3,96 d22 Z6 HM alternating tooth

With the extra-long half-groove cutter (19 mm), you can even restore the grooves of old window frames for the insertion of insulated glass.

These cutters are designed for trimming, shaping and grooving.

For direct drilling, use type F044.

Semi-slotted cutter sets allow you to make an unlimited number of cuts by setting different cutting heights on your cutter and changing the bearings on the cutter included in the set.

Special blade geometry for laminate and chipboard machining. The design of the F047-123 gives a cutting depth of 40 mm even when using a 29.5x9x1.5 mm blade if you are milling multiple passes through the material. Excellent use for cutting, shaping and grooving laminate or kitchen worktops using the top router and templates. Can be used for manual milling or on CNC machining centres.

Milling machine designed for precise face milling and copying according to the template underneath. With a traditional brazed cutter, the cutting diameter is reduced against the bearing during sharpening and this causes a tooth to form. The razor cutter eliminates this phenomenon with precisely aligned exchangeable razor blades that can also be rotated. For milling Corian, it is possible to purchase a straight or tapered bearing with a plastic ring to ensure precise guidance through the material.

• for trimming even the most difficult parts according to the template
• HW carbide cutting edges
• copy bearing on the cutter face

Slotting shank cutter with one drilling razor blade and one cutting razor blade. It has excellent drilling properties in hardwood and board materials (laminate, chipboard, MDF and Corian). The 20 mm diameter shank is designed for safe clamping in CNC machining centres at high feed rates. Can also be used for manual milling.

The milling cutter is equipped with a drilling razor blade, which makes it easier to drill into the material.