Tags Festool
Product sorting
List of products
Technical data:
- Light colour: 5000 K
- Bulbs: 80 x 1,4 W 8000 light_lm
- LED lifetime (L70): 10000 H
- Colour rendering index Ra: 80
- Protection class: IP 55
- Protection class: 1
- Cable length: 4.9 m
- Weight: 3.4 kg.
Scope of delivery: tripod ST DUO 200, in Systainer SYS 3 T-LOC.
Snap - and done. The HK 55, HKC 55 and HK 85 circular saws can be easily combined with the FSK drip rail, which comes in three lengths of 250 mm, 420 mm or 670 mm. With just a few movements, a mobile and easy-to-use drip system is created for precise and angularly accurate cuts
Snap - and done. The HK 55, HKC 55 and HK 85 circular saws can be easily combined with the FSK drip rail, which comes in three lengths of 250 mm, 420 mm or 670 mm. With just a few movements, a mobile and easy-to-use drip system is created for precise and angularly accurate cuts.
Snap - and done. The HK 55, HKC 55 and HK 85 circular saws can be easily combined with the FSK drip rail, which comes in three lengths of 250 mm, 420 mm or 670 mm. With just a few movements, a mobile and easy-to-use drip system is created for precise and angularly accurate cuts.
Technical data: width of the splint: 30 mm, length of the splint: 30 mm, depth of the splint: 125 mm.
Technical data: width of the splint: 28 mm, length of the splint: 35/40 mm, depth of the splint: 100 mm.
For rigid mixed materials; tile adhesives, grout, adhesive mortar, plaster, screed, trowel compounds, leveling compounds.
For MX 1200 series agitators.
For rigid mixed materials; tile adhesives, grout, adhesive mortar, plaster, screed, trowel compounds, leveling compounds.
For MX 1000 mixers.
Cordless impact drill TPC 18/4. Versatile. With 4 stages for each use.
Installation of furniture and kitchen units. Installation of fittings, rear walls, skirting boards. Installation of doors and windows, drilling and screwing into wood, metal and plastic. Fences, pergolas, carports, awnings. Production of lower wooden structures.
Installation of furniture and kitchen units. Installation of fittings, rear walls, skirting boards. Installation of doors and windows, drilling and screwing into wood, metal and plastic. Fences, pergolas, carports, awnings. Production of lower wooden structures.
Drilling of holes for dowels up to 18 mm in concrete, stone and masonry with pneumatic impact. Weighing only 2.3 kg.
Drilling of holes for dowels up to 18 mm in concrete, stone and masonry with pneumatic impact.
Submersible saws Festool have been setting the highest bar in cutting for many decades. TS 60 K means again a new definition of this level.
Lightweight, compact and admirably powerful. Ergonomic C-shape facilitates precise work thanks to the handle position in the drilling and screwdriving axis
Lightweight, compact and admirably powerful. Ergonomic C-shape facilitates precise work thanks to the handle position in the drilling and screwdriving axis
CLEANTEC CTLC MIDI cordless mobile vacuum cleaner
The FS-WA angular stop can be extended with the scale extension and stop adjustment. In this way, it is possible to make customized cuts easily and with precise repetition.
Precise and uncomplicated angular cuts from -60 to +60 degrees: thanks to fast and precise set-up, any number of repeated cuts can be made.
Precise plunge cuts up to 55 mm material thickness. Perfect cutting of interior doors - plunge saw with guide rail. Cutting expansion joints in parquet floors and grooves. Cutting of plate material. Cutting and machining of gypsum fibre boards
The AIRSTREAM SCA 16 rapid charger for all 10.8–18 V batteries (except the BP-XS for CXS/TXS and the MXC charger) enables extremely fast and intelligent charging thanks to active cooling.
Extremely versatile. Extremely accurate. Extremely easy to handle: whether hand-guided or on a guide rail, the OF 1010 R top milling machine is the ideal tool for fine milling.
Lightweight, compact and admirably powerful. Ergonomic C-shape facilitates precise work thanks to the handle position in the drilling and screwdriving axis
Lightweight, compact and admirably powerful. Ergonomic C-shape facilitates precise work thanks to the handle position in the drilling and screwdriving axis
Lightweight, compact and admirably powerful. Ergonomic C-shape facilitates precise work thanks to the handle position in the drilling and screwdriving axis
Lightweight, compact and admirably powerful. Ergonomic C-shape facilitates precise work thanks to the handle position in the drilling and screwdriving axis
Lightweight, compact and admirably powerful. Ergonomic C-shape facilitates precise work thanks to the handle position in the drilling and screwdriving axis
Lightweight, compact and admirably powerful. Ergonomic C-shape facilitates precise work thanks to the handle position in the drilling and screwdriving axis
Installation of furniture and kitchen units. Installation of skirting boards, sockets, light fittings, curtains. Installation of wheel arches and door trim. Easy drilling and screwdriving in wood, metal and plastic
Installation of furniture and kitchen units. Installation of skirting boards, sockets, light fittings, curtains. Installation of wheel arches and door trim. Easy drilling and screwdriving in wood, metal and plastic
Our smallest with 12 volts. The hero among compact screwdrivers. Lightweight, compact and admirably powerful. The CXS 12 compact screwdriver is your ideal tool for a wide range of everyday tasks.
Our smallest with 12 volts. The hero among compact screwdrivers. Lightweight, compact and admirably powerful. The CXS 12 compact screwdriver is your ideal tool for a wide range of everyday tasks.
Ideal for mobile use on the assembly site. Cutting of boards and panels up to 305 × 60 mm. Cutting of strips, profiles and prisms up to 60 mm thickness. Angularly precise adjustment of skirting boards and ceiling strips without calculation - in combination with the angle unit.
Mobile precision cutting. Cordless table circular saw in Systainer format.
- Extensive, 104-piece CENTROTEC accessories in the Systainer³ organiser SYS3 ORG M 89.
- Flexibilitatively equipped for all drilling, screwdriving and assembly work.
- In addition to various bits and drills, it also includes CENTROTEC centering drills, countersink drills/reamers and many more
Submersible saws Festool have been setting the highest bar in cutting for many decades. TS 60 K means again a new definition of this level.
Precise plunge cuts up to 55 mm material thickness. Perfect cutting of interior doors - plunge saw with guide rail. Cutting cut-outs in doors and kitchen worktops. Cutting expansion joints in parquet floors and grooves. Cutting of plate material
Precise plunge cuts up to 55 mm material thickness. Perfect cutting of interior doors - plunge saw with guide rail. Cutting expansion joints in parquet floors and grooves. Cutting of plate material. Cutting and machining of gypsum fibre boards
Cut-outs for sinks and hobs. Lining work on furniture, kitchen units, building interiors. Cutting circles and curves. Cutting of trimming strips. Cutting workpieces. Arched cut-outs in beams. Cutting from the bottom. Convenient suction work - the Bluetooth® battery in AUTO mode automatically starts the Bluetooth® mobile vacuum cleaner
Cut-outs for sinks and hobs. Lining work on furniture, kitchen units, building interiors. Cutting circles and curves. Cutting of trimming strips. Cutting workpieces. Arched cut-outs in beams. Cutting from below
Cut-outs for sinks and hobs. Lining work on furniture, kitchen units, building interiors. Cutting circles and curves. Cutting of trimming strips. Cutting workpieces. Arched cut-outs in beams. Cutting from the bottom. Convenient suction work - the Bluetooth® battery in AUTO mode automatically starts the Bluetooth® mobile vacuum cleaner
Cut-outs for sinks and hobs. Lining work on furniture, kitchen units, building interiors. Cutting circles and curves. Cutting of trimming strips. Cutting workpieces. Arched cut-outs in beams. Cutting from the bottom. Convenient suction work - the Bluetooth® battery in AUTO mode automatically starts the Bluetooth® mobile vacuum cleaner
Cut-outs for sinks and hobs. Lining work on furniture, kitchen units, building interiors. Cutting circles and curves. Cutting of trimming strips. Cutting workpieces. Arched cut-outs in beams. Cutting from below
Torque-free, wrist-friendly screwdriving. Installation of furniture and kitchen units. Installation of fittings, rear walls, skirting boards. Installation of doors and windows. Screwing into wood, metal and plastic. Fences, pergolas, carports, awnings. Manufacture of lower wooden structures
The compact power tool convinces thanks to an extremely robust impact mechanism with outstanding durability. The perfect combination of the latest generation EC TEC carbon-free engine and battery ensures maximum performance and endurance.
Installation of furniture and kitchen units. Installation of fittings, rear walls, skirting boards. Installation of doors and windows, drilling and screwing into wood, metal and plastic. Fences, pergolas, carports, awnings. Manufacture of lower wooden structures
Installation of furniture and kitchen units. Installation of fittings, rear walls, skirting boards. Installation of doors and windows, drilling and screwing into wood, metal and plastic. Fences, pergolas, carports, awnings. Manufacture of lower wooden structures
Installation of furniture and kitchen units. Installation of fittings, rear walls, skirting boards. Installation of doors and windows, drilling and screwing into wood, metal and plastic. Fences, pergolas, carports, awnings. Manufacture of lower wooden structures
Installation of furniture and kitchen units. Installation of fittings, rear walls, skirting boards. Installation of doors and windows, drilling and screwing into wood, metal and plastic. Fences, pergolas, carports, awnings. Manufacture of lower wooden structures
Not flat. Not circular. Simply FESTOOL DOMINO, domino pins combine all the advantages of pins and slats. Fastest connection of large workpieces with pin sizes up to 14x140mm.
Intermediate sanding and rough sanding of varnishes and sealants. For flat surfaces and curves. Finishing grinding of fillers
New Festool - ETS EC 150. With a design height of only 116 mm, brushless EC-TEC motor.
Paint and varnish finishing on window frames. Ideal for vertical surfaces or overhead work. Grinding of perforated joints. Grinding at angles, corners and edges - wherever space is at a premium. Slat grinding with a special grinding plate. Carrying out repairs to individual points in the bodywork area
Electric hand planer HL 850 - the only planer that can endlessly plan.
Casting work. Assembly work. Remoulding of carcasses, cover strips, skirting boards, mouldings, doors .... Work that requires comfortable one-handed guidance.
Edge milling machine specially for face milling and rounding of overlapping edges. The unique ball-bearing brake guarantees perfect, streak-free work results.
Fast rounding and chamfering of prisms, door frames and panels. Face milling of plywood and mouldings.
Fluting, grooving and profiling. Milling large cutouts, circles and curves with the multi-purpose milling jig. Production of corner joints of worktops with template for worktop joints. Milling grooves for door seals and automatic window and door seals.
Fluting, grooving and profiling. Milling large cutouts, circles and curves with the multi-purpose milling jig. Production of corner joints of worktops with template for worktop joints. Milling grooves for door seals and automatic window and door seals.
Rounding, chamfering, fluting and edge profiling. Milling curves and cut-outs with the multi-purpose milling jig. With guide system for milling grooves on rear walls or recessing of clamping rails. Milling grooves for Schallex, Kältefeind or automatic door and window seals with the milling tool. Milling of mineral materials (max. (45 mm cutters).
Excellent curve cutting thanks to triple blade guide and torsion-resistant lifting bar. Easy handling thanks to Softgrip handle and ergonomic design
Ergonomic, light and handy - with the CARVEX you will work comfortably in any position. And fast: with 3,800 strokes per minute for unrivalled breakthrough power and unsurpassed curve cutting.
Ergonomic, light and handy - with the CARVEX you will work comfortably in any position. And fast: with 3,800 strokes per minute for unrivalled breakthrough power and unsurpassed curve cutting.
Longitudinal and transverse cuts up to a material thickness of 85 mm. Versatile use for mitre cuts up to 60°. Cutting of beams, wooden beams and planks. Cutting of board materials, fibreboard insulation materials and sandwich panels
Specialist in final grinding.
Finishing sanding of paint, wood and plastics. Pre-grinding before polishing. Finishing grinding of mineral materials. Final sanding of high gloss surfaces before polishing. Final sanding of wooden surfaces before waxing. Finishing grinding of fillers
One-handed grinding of shaped and arched parts, e.g. wooden and plastic parts. Ideal for vertical surfaces or overhead work. Finishing grinding and polishing or pre-grinding of small surfaces. Disturbance of crosswalks at repair locations. Grinding different materials close to the edges
Cut-outs for sinks and hobs. Lining work on furniture, kitchen units, building interiors. Cutting circles and curves. Cutting of trimming strips. Cutting workpieces. Arched cut-outs in beams
Cut-outs for sinks and hobs. Lining work on furniture, kitchen units, building interiors. Cutting circles and curves. Cutting of trimming strips. Cutting workpieces. Arched cut-outs in beams. Cutting from below
Finishing of old paints and varnishes. Sanding of wooden materials. Renovation work, e.g. stair grinding. Grinding and polishing of mineral materials. Pre-grinding and rough grinding of the sealant. Polishing without holograms
The vacuum cleaner is extremely small, lightweight and compact, which makes it easy to carry and allows mobile use, for example for small assembly jobs.
Finishing of old paints and varnishes. Sanding of wooden materials. Renovation work, e.g. stair grinding. Grinding and polishing of mineral materials. Pre-grinding and rough grinding of the sealant. Polishing without holograms
The ETS 150/5 eccentric sander is the ideal sander for sanding between paintwork and with a stroke of 5 mm achieves the best surface quality with optimum removal performance.
Variant in paper box without systainer.
New Festool - ETS EC 150. With a design height of only 116 mm, brushless EC-TEC motor.
New Festool - ETS EC 150. With a design height of only 116 mm, brushless EC-TEC motor.
Compact, yet large. Lightweight, yet powerful. Whether on the job site or in the workshop - the CLEANTEC CTM 36 provides a large volume in a compact size with its 26 litre capacity thanks to the geometry of the large container.
With AUTOCLEAN (AC), you don't have to worry about the cleanliness of the main filter - automatic cleaning ensures that the filter stays clean and the suction power is always at its maximum level.
Compact, yet large. Lightweight, yet powerful. Whether on the job site or in the workshop - the CLEANTEC CTM 26 provides a large volume in a compact size with its 26 litre capacity thanks to the geometry of the large container.
No more clogged filters - because thanks to the automatic cleaning of the AUTOCLEAN (AC) main filter, the filter remains clean and a consistently high suction performance is ensured.
Festool CLEANTEC CTL 36 is suitable for professional use in the construction industry and in workshops. Compact, yet large.
CLEANTEC CTL 26 is suitable for professional use in the construction industry and in workshops.
Compact size, yet huge capacity. Lightweight design, but incredibly powerful vacuum cleaner.
the ideal compact vacuum cleaner for assembly and minor interior work. Superstructure for storing additional tools in the SYSTAINER.
Mobile assembly vacuum cleaner CTL MIDI I - The vacuum cleaner is easily portable thanks to its compact dimensions and low weight. It has a sturdy chassis that makes it easy to transport.
Milling of solid wood, acrylic and PVC sheets. Beveling, rounding and edge profiling. Grooving with side stop.
Milling of solid wood, acrylic and PVC sheets. Beveling, rounding and edge profiling. Grooving with side stop.
Technical data:
- Bulbs: 12 x 1.5 W
- Value in lux (average value per 1 m2): 133
- Illumination time (internal battery)1st/2nd stage: 290/110 min
- Li-Ion battery capacity: 2.9 Ah
- Lithium-ion battery charging time: 200 min
- Permissible operating temperature range: -5/+ 55 °C
- Operation with external batteries Festool: 12-18 V
- Hook hole: 40 mm
- Tripod thread size: 1/4"
- Dimensions (L x W x H): 80 x 100 x 150 mm
- Weight (without battery): 0.7 kg
anti-static design | for connection to the machine (machine suction neck or suction nozzle)
Technical data:
- Bulbs: 12 x 1.5 W
- Value in lux (average value per 1 m2): 133
- Illumination time (internal battery)1st/2nd stage: 290/110 min
- Li-Ion battery capacity: 2.9 Ah
- Lithium-ion battery charging time: 200 min
- Permissible operating temperature range: -5/+ 55 °C
- Operation with external batteries Festool: 12-18 V
- Hook hole: 40 mm
- Tripod thread size: 1/4"
- Dimensions (L x W x H): 80 x 100 x 150 mm
- Weight (without battery): 0.7 kg
Technical data: magnet holding force: 16 kg. Scope of delivery: plate for external tripod.
Dimensions (L x W x H): 247 x 134 x 15 mm.
Dimensions (L x W x H): 480 x 278 x 30 mm.
Dimensions (L x W x H): 472 x 247 x 30 mm.
Vytvořil Shoptet