Piher - high-performance Maxipress clamp - E
Code: PI59020Related products
Piher - protective caps for most large clamps.
High precision Japanese aluminium 45° and 90° 3D mitre bevel.
Accurate measurement of multiple angles: the Angle Measuring and Transferring Angle can accurately measure angles between 10 and 170 degrees.
Joinery wide stainless steel flat angle has a scale on all sides.
High precision Japanese aluminium 3D mitre angle 2 x 45° and 90°.
Stainless steel ruler with zero points at both ends simplifies measurement readings. Two differently divided scales on one ruler, 0.5 mm pitch on the front side and 1.0 mm pitch on the back side.
Stainless steel flat scribing angle with sliding part equipped with nonium for measuring external dimensions.
ScribeTec™ from Milescraft® is a flexible marking tool, it allows you to articulate arms that adapt to any surface or contour.
Precision Cut Steel Japanese Angle 45° and 90°
Ready to make your job easier and more accurate at the same time? Introducing CenterFinder, an innovative center marker that turns your pointing and plotting into a breeze!
The RED digital spirit level can be used wherever you need to quickly and accurately determine inclination, slope or angle.
Shinwa - Japanese stainless steel rulers with hard chrome finish for industrial use. On the back of the conversion table from inches to millimeters and the dimensions of the holes under the threads.
Stainless steel flat scribing angle with sliding part equipped with nonium for measuring external dimensions.
New and better: Angle adjustment accuracy is +/- 0.05. 8 angle adjustment positions in 22.5 increments (157.5 , 135 , 112 , 90 , 67.5 , 45 and 22.5 ). Folds easily for carrying in your pocket.
Sliding stop on the measuring ruler, you can measure not only the length but also the depth.
Product detailed description
Introducing the Piher Maxipress E - the clamping master with an incredible force of 850 kg! This great helper will show you what it means to have a really tight fit.
The Maxipress E boasts an extra durable rolled steel bar with a cross section of 30 x 8 mm. Its jaws are made of high quality steel alloy and have a clamping depth of 9.5 cm. And that's not all!
A special stop on the sliding jaw prevents accidental sliding on the leash, so you don't have to worry about your item coming loose. In addition, the V-shaped cross groove in the fixed jaw allows even round objects to be clamped - yes, the Maxipress E is a truly universal tool!
The 1:2 gearing in the clamping screw together with the crank handle ensures a maximum pressure of up to 850 kg. The clamping screw is also equipped with a lubrication hole for easy maintenance.
The clamp is designed to stand on its own on the edge - so there is no need to hold it. The handle is made of high-quality plastic and is easily removable.
And to make the Maxipress E the perfect helper, you can retrofit it with plastic caps to prevent accidental damage to the clamping material.
- Extra durable rolled steel bar with a cross section of 30 x 8 mm.
- High-quality steel jaws with a clamping depth of 9.5 cm.
- A special stop on the sliding jaw prevents accidental sliding on the leash.
- The cross groove in the fixed V-shaped jaw allows you to clamp even round objects.
- 1:2 transmission in the clamping screw in combination with the crank handle for a maximum pressure of 850 kg.
- The clamping screw is equipped with a lubrication hole.
- The clamp is designed to stand on its own on the edge.
- The handle made of high-quality plastic is removable.
- Plastic caps that can be retrofitted to the clamps prevent accidental damage to the clamped material.
So what do you say? Is it time to welcome Piher Maxipress E to your workshop?
Additional parameters
Category: | Carpentry clamps and pullers |
---|---|
Warranty: | 1 year |
Viking Arm is a tool assembly set in a transport case that includes 2 x hand jack Viking Arm a 2 x cabinet mounting attachment.
Easy clamping with only one hand, easy tool-free repositioning of the clamp for expansion. To release the arm, simply press the latch and turn.
New from Bessey: one-hand gear clamp with guide bar clamping for narrow and otherwise confined spaces.
Uniform clamping of workpieces with four angle-adjustable plastic corners.
The face frame clamp can accurately clamp and tighten, pre-drill and bolt everything in one step up to a material thickness of 30 mm and a clamping width of 80-120 mm.
Portable carpentry roller support with ponk clamping.
-
Portable model for mounting on tables up to a maximum board thickness of 60 mm
-
Can be mounted on the table from the side or from the bottom
- Width of support roller: 45 cm
- Maximum roller extension height 35cm.
Bessey - joiner's pipe clamp for grout 1/2"
Supplied with 1000 mm long threaded steel pipe.
If you are interested in other dimensions please contact us.
Portable joinery vise with bottom mounted ponk.
-
Parallel double steel slider.
-
Made of nodular cast iron.
- Jaw width: 17,5 cm
- Height of jaws : 8 cm
- Max clamping (workpiece width): 20 cm
Flat clamping clamps for workbenches and multifunction tables with punch plate and hole diameter 20 mm.
For all professional joiners and craftsmen who are looking for the perfect combination of performance and precision, the SIMPLEX joiner promotional box comes to mind.
The Viking Arm® Telescopic Extension is ideal for fast, safe and accurate wall cabinet installation.
- The attachment provides 3 levels of extension and offers safe, convenient and efficient mounting options that can save professionals valuable time.
- This makes it a one-man assembly and eliminates the need for a second (or third!) person to hold an object weighing up to 50 kg in place.
- It gives the user the ability to work independently and safely, smoothly and with the typical precision of the Viking Arm® tool, and to secure even heavy objects.
Neither the transport case nor the hand jack itself Viking Arm is included.
One-handed lever clamp Piher Light-Pal with nylon and fibreglass jaws, 8 cm clamping depth and 120 kg force. The advantage of the clamp is that it stands on its own.
As part of Viking Arm 's efforts to innovate and provide services to professionals in their daily activities, we are introducing a new 2-pc carrying case Viking Arm.
The case contains a tool insert and a small box for spare lifting feet and spare parts.
Piher - one-handed clamp for guide rails Festool, Makita, DeWalt and T-slots. Clamp lengths of 15 and 22 cm fit comfortably into any suitcase.
Clamping clamp for multifunction tables with 20 mm diameter holes and a board thickness of min. 19 mm to max. 25 mm.
Piher Quick T-track is designed for most guide rails (Festool, Makita, DeWalt,Triton, Parkside, Asist).
Be the first who will post an article to this item!
Be the first who will post an article to this item!