Bessey - lever clamp for worktop with perforation
Code: TW20158KLIRelated products
Toughbuilt is a high-end folding assembly table that folds in seconds. Create a comfortable 80 cm high work table.
ScribeTec™ from Milescraft® is a flexible marking tool, it allows you to articulate arms that adapt to any surface or contour.
Accurate measurement of multiple angles: the Angle Measuring and Transferring Angle can accurately measure angles between 10 and 170 degrees.
Stainless steel flat scribing angle with sliding part equipped with nonium for measuring external dimensions.
High precision Japanese aluminium 3D mitre angle 2 x 45° and 90°.
Robust, precise mitre angle with 45°/135° jib and 8 cm metric scale.
Profiler+ ® is a simple, easy-to-use drawing tool.
Any profile, any material.......transfer the contour from any surface to the material quickly and accurately
Robust, precise mitre angle with 45°/90°/135° jib with traditional SHAKU scale - one piece 3 mm.
Precision Japanese miter gauge Shinwa for easy and accurate measurement.
Properties: Robust, aluminium handle with wide stop. Non-glare, blue spring steel bar for pleasant work. Precision 45° and 135° mitre angle.
Ready to make your job easier and more accurate at the same time? Introducing CenterFinder, an innovative center marker that turns your pointing and plotting into a breeze!
New and better: Angle adjustment accuracy is +/- 0.05. 8 angle adjustment positions in 22.5 increments (157.5 , 135 , 112 , 90 , 67.5 , 45 and 22.5 ). Folds easily for carrying in your pocket.
Stainless steel ruler with zero points at both ends simplifies measurement readings. Two differently divided scales on one ruler, 0.5 mm pitch on the front side and 1.0 mm pitch on the back side.
Joinery wide stainless steel flat angle has a scale on all sides.
Product detailed description
- Clamping force up to 500 N.
- For use on multifunctional tables such as e.g. Festool MFT and Sortimo WorkMo with a hole diameter of 20 mm and a plate thickness of min. 19 mm to max. 25 mm.
- Stable sliding bracket made of lightweight magnesium for fast, vibration-resistant clamping.
- Profile made of high quality cold drawn steel for flexible and elastic clamping.
Additional parameters
Category: | Carpentry clamps and pullers |
---|---|
Warranty: | 2 years |
Weight: | 0.31 kg |
secure attachment to guide rails from manufacturers Festool, Metabo, Makita, Hikoki (Hitachi), Dewalt etc.
package content : 2pcs (1pair)
Portable joinery vice with ponk clamp.
-
Portable model for mounting on tables up to max. 52 mm plate thickness
-
Parallel double steel slider.
-
Made of nodular cast iron.
- Jaw width: 15 cm
- Height of jaws :5,5 cm
- Max clamping (workpiece width): 12 cm
Viking Arm - Protective non-slip jaw on the upper movable part.
- the pad is equipped with an anti-slip layer
- protects delicate surfaces from damage
- expands the possibilities of using your Viking Armat
- especially useful for assembly work
- designed for the upper movable part Viking Armu
- minimum mounting height with base in place 15 mm
Uniform clamping of rectangular workpieces with four plastic corners.
Piher - The Maxipress - M is the smallest of the Maxipress range with a 7 cm extension and a rod cross section of 18 x 7 mm.
High-performance clamps Piher Maxipress R with a depth of 16 cm and a clamping force of 1000 kg. New handle can be used as straight or rectangular for maximum tightening.
High-performance clamps Piher Maxipress F with a depth of 12 cm and a clamping force of 900 kg. New handle can be used as straight or rectangular for maximum tightening.
Viking Arm - Protective non-slip jaw on the upper movable part.
- the pad is equipped with an anti-slip layer
- protects delicate surfaces from damage
- expands the possibilities of using your Viking Armat
- especially useful for assembly work
- designed for the upper movable part Viking Armu
- smallest mounting height with bases fitted 22 mm
The original technical design allows you to clamp and expand with a force of up to 2000 N.
Viking Arm is a tool assembly set in a transport case that includes 2 x hand jack Viking Arm a 2 x cabinet mounting attachment.
Flat clamping clamps for workbenches and multifunction tables with punch plate and hole diameter 20 mm.
New from Bessey: one-hand gear clamp with guide bar clamping for narrow and otherwise confined spaces.
- Clamping span: 160 mm
- Package contents: 1 piece
The Viking Arm® Telescopic Extension is ideal for fast, safe and accurate wall cabinet installation.
- The attachment provides 3 levels of extension and offers safe, convenient and efficient mounting options that can save professionals valuable time.
- This makes it a one-man assembly and eliminates the need for a second (or third!) person to hold an object weighing up to 50 kg in place.
- It gives the user the ability to work independently and safely, smoothly and with the typical precision of the Viking Arm® tool, and to secure even heavy objects.
Neither the transport case nor the hand jack itself Viking Arm is included.
Be the first who will post an article to this item!
Be the first who will post an article to this item!