Piher - one-handed quick release - Mini Quick -15cm
Code: PI52415Related products
Piher - adapter that easily converts your MiniQuick to a perpendicular or flat bench clamp with 19/20 mm holes.
Ready to make your job easier and more accurate at the same time? Introducing CenterFinder, an innovative center marker that turns your pointing and plotting into a breeze!
Shinwa - Japanese stainless steel rulers with hard chrome finish for industrial use. On the back of the conversion table from inches to millimeters and the dimensions of the holes under the threads.
High precision Japanese aluminium 45° and 90° 3D mitre bevel.
Stainless steel ruler with zero points at both ends simplifies measurement readings. Two differently divided scales on one ruler, 0.5 mm pitch on the front side and 1.0 mm pitch on the back side.
The RED digital spirit level can be used wherever you need to quickly and accurately determine inclination, slope or angle.
Sliding stop on the measuring ruler, you can measure not only the length but also the depth.
Japanese transparent 3D miter angle (Two-by-Four) for 2x4" material.
New and better: Angle adjustment accuracy is +/- 0.05. 8 angle adjustment positions in 22.5 increments (157.5 , 135 , 112 , 90 , 67.5 , 45 and 22.5 ). Folds easily for carrying in your pocket.
Joinery wide stainless steel flat angle has a scale on all sides.
Robust, precise mitre angle with 45°/90°/135° jib with traditional SHAKU scale - one piece 3 mm.
Precision Japanese miter gauge Shinwa for easy and accurate measurement.
Properties: Robust, aluminium handle with wide stop. Non-glare, blue spring steel bar for pleasant work. Precision 45° and 135° mitre angle.
Product detailed description
Quality quick release from Piherfor everyday use with a clamping pitch of 15 cm and a total length of 34 cm.
- Robust hardened plastic jaws with caps to prevent damage to the clamping material.
- The smooth steel rod and three-disc brake are the basis for the quality of the 75 kg clamp.
- Depth of jaws 6 cm, size of jaw 50x2,5cm
- Easily convert the clamp from clamping to expanding by simply pressing the latch on the fixed jaw.
Additional parameters
Category: | Carpentry clamps and pullers |
---|---|
Warranty: | 2 years |
The face frame clamp can accurately clamp and tighten, pre-drill and bolt everything in one step up to a material thickness of 30 mm and a clamping width of 80-120 mm.
Viking Arm - replaceable jaws with a thickness of only 3 mm for particularly inaccessible areas.
Package contents:
- 1 x base 3 mm
- 1 x jaw 3 mm
Piher - one-handed clamp for guide rails Festool, Makita, DeWalt and T-slots. Clamp lengths of 15 and 22 cm fit comfortably into any suitcase.
VIKING ARM® hand jacks - your universal solution for every assembly
Introducing the VIKING ARM® lifting set in the trasnport case, which will become your indispensable helper in any assembly. This set offers a wide range of applications, from kitchens and doors to floors and patios. Plus, thanks to the unique design of the Viking Arm, you can expect precise control over every movement.
Milescraft - corner clamp for perfect right-angled clamping. With a pair of eccentric quick-clamps and a massive angle, you achieve the perfect result.
Milescraft - corner clamp for perfect right-angled clamping. With a pair of corner clamps and a solid plastic angle, you will achieve the perfect result.
Clamping element MFT-SP (pack of 2).
Viking Arm is a tool assembly set in a transport case that includes 2 x hand jack Viking Arm a 2 x cabinet mounting attachment.
One-handed lever clamp Piher Light-Pal with nylon and fibreglass jaws, 8 cm clamping depth and 120 kg force. The advantage of the clamp is that it stands on its own.
The corner angle set with clamps from Milescraft is the ideal helper for everyone who is not only involved in joinery. It is intuitive to use and the results are always perfectly accurate.
- Clamping span: 160 mm
- Package contents: 1 piece
The Micro Quick is the smallest one-handed clamp from Piher designed for model makers, home use or for making small parts and odds and ends.
Price for 2 pcs
Viking Arm - Protective non-slip jaw on the upper movable part.
- the pad is equipped with an anti-slip layer
- protects delicate surfaces from damage
- expands the possibilities of using your Viking Armat
- especially useful for assembly work
- designed for the upper movable part Viking Armu
- smallest mounting height with bases fitted 22 mm
Portable joinery vice with ponk clamp.
-
Portable model for mounting on tables up to max. 52 mm plate thickness
-
Parallel double steel slider.
-
Made of nodular cast iron.
- Jaw width: 15 cm
- Height of jaws :5,5 cm
- Max clamping (workpiece width): 12 cm
Be the first who will post an article to this item!