Milescraft - Grabber PRO multi-purpose pressing device
Code: M3406Related products
The innovative anti-kickback pressure ridge absorbs vibrations for a better cut with maximum safety.
The revolutionary pressure safety guide for bandsaw cutting, exerts constant pressure along the vertical edge of the workpiece and adapts to changes in pressure.
The double pressure ridge with a height of up to 9 cm prevents kickback and absorbs vibrations for a better cut with maximum safety.
- for trimming even the most difficult parts according to the template
- HW carbide cutting edges
- copy bearing on the cutter face
Special blade geometry for laminate and chipboard machining. The design of the F047-123 gives a cutting depth of 40 mm even when using a 29.5x9x1.5 mm blade if you are milling multiple passes through the material. Excellent use for cutting, shaping and grooving laminate or kitchen worktops using the top router and templates. Can be used for manual milling or on CNC machining centres.
Trimming cutter with upper and lower bearing. Double sided razor blades clamped with Torx strength screws. For precision face milling with a top milling machine or in a milling table.
Milling machine designed for precise face milling and copying according to the template underneath. With a traditional brazed cutter, the cutting diameter is reduced against the bearing during sharpening and this causes a tooth to form. The razor cutter eliminates this phenomenon with precisely aligned exchangeable razor blades, which can also be rotated and used with up to 4 blades. For milling Corian, it is possible to purchase a straight or tapered bearing with a plastic ring to ensure precise guidance through the material.
Type F043-195xx with a cutting length of 50 mm is equipped with two copy bearings for better guidance according to the template.
- Replaceable razor blades made of micro-grain carbide.
- The razor blades can be rotated by 90° for a total of 4 cutting edges.
- The razor blades are fixed with special Torx screws.
- Cutter body made of high-quality steel.
The cutter is equipped with two double-edged razor blades for rounding the edges. The radius is ground on all 4 sides of the razor for maximum tool efficiency. The cutter is fitted with a razor blade with a radius of R3mm or R2mm, which is mainly used on ABS edges. It is also possible to buy a radius R1mm and R1,5 mm, which can be used to cut the edge when gluing umakarte, veneer or laminate on boards. For use on manual top milling machines.
HM surface milling cutter - D60x12 L80 S=12x50 Z3 - ideal tool for large material removal from large surfaces.
- Clean, perfect cuts in boards or drawer fronts
- For edge beveling
- For milling lettering
With the extra-long half-groove cutter (19 mm), you can even restore the grooves of old window frames for the insertion of insulated glass.
Trimming cutter with one HM rotary razor blade and copy bearing on the shank. Ideal for trimming kitchen and worktops. Suitable for machining chipboard and laminated chipboard.
Type F045 is designed for cutting, copying and formatting according to a template when using a template from above. For processing of board materials (laminate, DTD, MDF) or hardwood.
Product detailed description
Milescraft® Grabber™ PRO is the top model of an important safety feature in joinery workshops.
- Rubberised seating surfaces ensure maximum contact with the workpiece.
- Two adjustable guides 25 mm and 12 mm wide (1" and 1/2") and two interchangeable guides 6 mm and 3 mm wide (1/4" and 1/8") are included.
- You can adjust the spacing of the guides according to your needs.
- The 6 and 3 mm wide guides allow you to cut even very weak slats or swartns safely.
- The rear foot has two locking screws for adjusting the required height.
- Side support surface if the material is not wide enough to provide a secure support for the fixture.
- The ergonomic angled handle is comfortable for guiding the material while creating pressure on the machine's guide stop.
- The handle is made of soft plastic for a comfortable grip.
Additional parameters
Category: | Guide rails and woodworking aids |
---|---|
Warranty: | 2 years |
Weight: | 0.97 kg |
The Track Rack is a great, versatile way to safely store and transport guide rails.
It extends the possibility of using the pressure guide for the band saw to a table saw or bottom milling machine.
Dimensions:
width: 18.40 mm
height: 12,70 mm
length: 190 mm
Special segments resembling the composition of bird feathers meet all the needs of the pressure range on the workpiece during machining.
Soft design for very fine machining.
Great for guiding material on router tables, table saws, band saws and other joinery machines.
Submersible saw guide bar, length 1.1 m
The revolutionary pressure safety guide for bandsaw cutting, exerts constant pressure along the vertical edge of the workpiece and adapts to changes in pressure.
Technical data: Length: 800 mm.
Replacement tips for the material feeder of the circular saw.
Pack of 2.
The innovative anti-kickback pressure ridge absorbs vibrations for a better cut with maximum safety.
Technical data: Length: 1400 mm.
Great for guiding material, especially for table saws, undercutters, band saws and other woodworking machines.
Víceůčelové vodítko
Be the first who will post an article to this item!
Be the first who will post an article to this item!