Bow - pressure guide for band saws
Code: PI63104Related products
The attachment for the revolutionary pressure safety guide for bandsaw cutting, exerts constant pressure along the vertical edge of the workpiece and adapts to changes in the workpiece.
Height up to 25 cm
It extends the possibility of using the pressure guide for the band saw to a table saw or bottom milling machine.
Dimensions:
width: 18.40 mm
height: 12,70 mm
length: 190 mm
Great for material guiding especially for table saws, bottom mills, band saws and other woodworking machines.
Great for guiding material, especially for table saws, undercutters, band saws and other woodworking machines.
With the extra-long half-groove cutter (19 mm), you can even restore the grooves of old window frames for the insertion of insulated glass.
Type F045 is designed for cutting, copying and formatting according to a template when using a template from above. For processing of board materials (laminate, DTD, MDF) or hardwood.
- Replaceable razor blades made of micro-grain carbide.
- The razor blades can be rotated by 90° for a total of 4 cutting edges.
- The razor blades are fixed with special Torx screws.
- Cutter body made of high-quality steel.
The cutter is equipped with two double-edged razor blades for rounding the edges. The radius is ground on all 4 sides of the razor for maximum tool efficiency. The cutter is fitted with a razor blade with a radius of R3mm or R2mm, which is mainly used on ABS edges. It is also possible to buy a radius R1mm and R1,5 mm, which can be used to cut the edge when gluing umakarte, veneer or laminate on boards. For use on manual top milling machines.
Milling machine designed for precise face milling and copying according to the template underneath. With a traditional brazed cutter, the cutting diameter is reduced against the bearing during sharpening and this causes a tooth to form. The razor cutter eliminates this phenomenon with precisely aligned exchangeable razor blades that can also be rotated. For milling Corian, it is possible to purchase a straight or tapered bearing with a plastic ring to ensure precise guidance through the material.
CMT cutters have long-lasting HM blades, are precision sharpened, and are suitable for milling softwood, hardwood, glulam, DTD, laminate, MDF and Corian. Also suitable for CNC machining.
The sharpening of the cutter face allows deep drilling operations.
Plate milling cutter without countersink, for milling grooves from 1.5 - 6 mm wide. The drift shank can be freely combined to create a groove according to your own requirements.
Use type 3 (without copy bearing) 4B (with copy bearing).
Milling machine designed for precise face milling and copying according to the template underneath. With a traditional brazed cutter, the cutting diameter is reduced against the bearing during sharpening and this causes a tooth to form. The razor cutter eliminates this phenomenon with precisely aligned exchangeable razor blades, which can also be rotated and used with up to 4 blades. For milling Corian, it is possible to purchase a straight or tapered bearing with a plastic ring to ensure precise guidance through the material.
Type F043-195xx with a cutting length of 50 mm is equipped with two copy bearings for better guidance according to the template.
The cutter is designed for trimming and chamfering edges.
Type F046 is without bearing. Designed for manual milling and also for machine milling on CNC centres.
Designed for trimming and edging.
Type F042 is equipped with a copy bearing. Designed for manual milling.
Product detailed description
- For band saws.
- Extendable up to 25 cm in height using the extension.
- Durable rubber mounted body exerts constant and consistent pressure along the vertical edge of the workpiece
- Absorbs vibrations for a cleaner cut.
- Protects hands during cutting.
- Quick setup.
Additional parameters
Category: | Guide rails and woodworking aids |
---|---|
Warranty: | 2 years |
Weight: | 0.8 kg |
Technical data: Length: 1400 mm.
Great for material guiding especially for table saws, bottom mills, band saws and other woodworking machines.
Special segments resembling the composition of bird feathers meet all the needs of the pressure range on the workpiece during machining.
Standard design for most operations.
Milescraft SawGuide™ is not only a practical tool, but also a tool that allows you to quickly prepare your saw for different types of cuts. Straight, angled, mitre and longitudinal cuts are a breeze with it
Guide rail for plunge saws and other saws Mafell, or Bosch in length 1,6m
Dip saw guide bar, length 0.8 m
Technical data: Length: 800 mm.
Guide rail for plunge saws and other Mafell and Bosch saws in length 3.1m.
Material feeder for table saw, bottom milling machine or band saw.
Special segments resembling the composition of bird feathers meet all the needs of the pressure range on the workpiece during machining.
Soft design for very fine machining.
Be the first who will post an article to this item!
Be the first who will post an article to this item!