Piher - one-handed quick release - Mini Quick -15cm
Code: PI52415Related products
Piher - adapter that easily converts your MiniQuick to a perpendicular or flat bench clamp with 19/20 mm holes.
Precision Cut Steel Japanese Angle 45° and 90°
High precision Japanese aluminium 3D mitre angle 2 x 45° and 90°.
Japanese transparent 3D miter angle (Two-by-Four) for 2x4" material.
Stainless steel flat scribing angle with sliding part equipped with nonium for measuring external dimensions.
Robust, precise mitre angle with 45°/90°/135° jib with traditional SHAKU scale - one piece 3 mm.
High precision Japanese aluminium 45° and 90° 3D mitre bevel.
Properties: Robust, aluminium handle with wide stop. Non-glare, blue spring steel bar for pleasant work. Precision 45° and 135° mitre angle.
Joinery wide stainless steel flat angle has a scale on all sides.
Profiler+ ® is a simple, easy-to-use drawing tool.
Any profile, any material.......transfer the contour from any surface to the material quickly and accurately
Stainless steel ruler with zero points at both ends simplifies measurement readings. Two differently divided scales on one ruler, 0.5 mm pitch on the front side and 1.0 mm pitch on the back side.
Stainless steel flat scribing angle with sliding part equipped with nonium for measuring external dimensions.
Accurate measurement of multiple angles: the Angle Measuring and Transferring Angle can accurately measure angles between 10 and 170 degrees.
Product detailed description
Quality quick release from Piherfor everyday use with a clamping pitch of 15 cm and a total length of 34 cm.
- Robust hardened plastic jaws with caps to prevent damage to the clamping material.
- The smooth steel rod and three-disc brake are the basis for the quality of the 75 kg clamp.
- Depth of jaws 6 cm, size of jaw 50x2,5cm
- Easily convert the clamp from clamping to expanding by simply pressing the latch on the fixed jaw.
Additional parameters
Category: | Carpentry clamps and pullers |
---|---|
Warranty: | 2 years |
For all professional joiners and craftsmen who are looking for the perfect combination of performance and precision, the SIMPLEX joiner promotional box comes to mind.
Piher Quick T-track is designed for most guide rails (Festool, Makita, DeWalt,Triton, Parkside, Asist).
Clamping element MFT-SP (pack of 2).
The original technical design allows you to clamp and expand with a force of up to 2000 N.
Milescraft - FenceClamps™ (corner clamps) can be used in combination with the auxiliary angle included with the joiner's corner quick clamp.
Viking Arm - new protective non-slip pad
- the pad is equipped with an anti-slip layer
- protects delicate surfaces from damage
- expands the possibilities of using your Viking Armat
- especially useful for assembly work
- designed for the bottom motherboard Viking Armu
- minimum mounting height with base in place 15 mm
Dimensions:
115 x 100 x 15 mm
Package: 1 piece
secure attachment to guide rails from manufacturers Festool, Metabo, Makita, Hikoki (Hitachi), Dewalt etc.
package content : 2pcs (1pair)
High-performance clamps Piher Maxipress R with a depth of 16 cm and a clamping force of 1000 kg. New handle can be used as straight or rectangular for maximum tightening.
The corner angle set with clamps from Milescraft is the ideal helper for everyone who is not only involved in joinery. It is intuitive to use and the results are always perfectly accurate.
Easy clamping with only one hand, easy tool-free repositioning of the clamp for expansion. To release the arm, simply press the latch and turn.
New from Bessey: one-hand gear clamp with guide bar clamping for narrow and otherwise confined spaces.
Piher - The Maxipress - M is the smallest of the Maxipress range with a 7 cm extension and a rod cross section of 18 x 7 mm.
Viking Arm - Protective non-slip jaw on the upper movable part.
- the pad is equipped with an anti-slip layer
- protects delicate surfaces from damage
- expands the possibilities of using your Viking Armat
- especially useful for assembly work
- designed for the upper movable part Viking Armu
- minimum mounting height with base in place 15 mm
Portable joinery vise with bottom mounted ponk.
-
Parallel double steel slider.
-
Made of nodular cast iron.
- Jaw width: 17,5 cm
- Height of jaws : 8 cm
- Max clamping (workpiece width): 20 cm
The Micro Quick is the smallest one-handed clamp from Piher designed for model makers, home use or for making small parts and odds and ends.
Price for 2 pcs
Be the first who will post an article to this item!