Lamello - Cabineo drill jig
Code: EVLCJIG1Related products
Lamello Cabineo is a modern connector designed for CNC machining. No drilling into the edge, everything happens only on the surface.
The cutter is designed for trimming and chamfering edges.
Type F046 is without bearing. Designed for manual milling and also for machine milling on CNC centres.
Type F045 is designed for cutting, copying and formatting according to a template when using a template from above. For processing of board materials (laminate, DTD, MDF) or hardwood.
- Replaceable razor blades made of micro-grain carbide.
- The razor blades can be rotated by 90° for a total of 4 cutting edges.
- The razor blades are fixed with special Torx screws.
- Cutter body made of high-quality steel.
The cutter is equipped with two double-edged razor blades for rounding the edges. The radius is ground on all 4 sides of the razor for maximum tool efficiency. The cutter is fitted with a razor blade with a radius of R3mm or R2mm, which is mainly used on ABS edges. It is also possible to buy a radius R1mm and R1,5 mm, which can be used to cut the edge when gluing umakarte, veneer or laminate on boards. For use on manual top milling machines.
Trimming cutter with one HM rotary razor blade and copy bearing on the shank. Ideal for trimming kitchen and worktops. Suitable for machining chipboard and laminated chipboard.
- for trimming even the most difficult parts according to the template
- HW carbide cutting edges
- copy bearing on the cutter face
Semi-slotted cutter sets allow you to make an unlimited number of cuts by setting different cutting heights on your cutter and changing the bearings on the cutter included in the set.
CMT cutters have long-lasting HM blades, are precision sharpened, and are suitable for milling softwood, hardwood, glulam, DTD, laminate, MDF and Corian. Also suitable for CNC machining.
The sharpening of the cutter face allows deep drilling operations.
Milling machine designed for precise face milling and copying according to the template underneath. With a traditional brazed cutter, the cutting diameter is reduced against the bearing during sharpening and this causes a tooth to form. The razor cutter eliminates this phenomenon with precisely aligned exchangeable razor blades that can also be rotated. For milling Corian, it is possible to purchase a straight or tapered bearing with a plastic ring to ensure precise guidance through the material.
- Clean, perfect cuts in boards or drawer fronts
- For edge beveling
- For milling lettering
Product detailed description
The fastest way to create a connection
- Use a drill or cordless screwdriver to make the connection
- Fast and strong 90° connection of two plates
- Creating a joint on an edge or in a surface
- The unique coupling jig Lamello Cabineo
The EVLC Jig combines simplicity and ingenuity for easy operation and easy hole making for the Lamello Cabineo fastening system. The tool is designed for precise and productive manual joining of furniture parts using a drill or an electric screwdriver. The EVLC is equipped with precision holes for pre-drilling holes in the bottom, soil and sides of the hull. With the EVLC, you not only make a hole for the clutch bolt, but also drill three holes for the clutch itself Lamello Cabineo. With the EVLC jig you achieve high precision and productivity almost like on a CNC machine. The template is designed for use with a drilling spindle, into which you can clamp the necessary drill bits with diameters from 5mm and 15mm.
Working with the product is very fast intuitive. Set the drilling depth on the drill spindle and clamp it to your drill. Place the product on the board to be joined, rest it on the stops and clamp it with a clamp or just hold it firmly. Thanks to the pin drill with guide tip and pre-cuts, you can drill holes easily, precisely and without burrs on the edge of the hole.
After drilling holes in the plates to be joined, push the Lamello Cabineo coupling into the drilled hole. Then screw the clutch bolt into the second piece with an Allen key and tighten it firmly. It is an easy, quick and extremely strong connection of furniture parts.
- Product EVLC Jig
- Use: Professional, Craftsman, Assembly, Handyman
- Distance of clutch from edge: 44mm
- Max. part width unlimited
- Plate thickness: 18mm, 16mm
- For the connection system: Lamello Cabineo
Part of the package:
- Drilling jig for joining
- A set of stops for marking on the part
- Drilling spindle EVVP1
- Pegging drill HM D5x30 S8
- Pegging drill HM D15x20 S8
- 2pcs Lamelo Cabineo couplings
Additional parameters
Category: | Drilling and milling jigs |
---|---|
Warranty: | 2 years |
Weight: | 1.2 kg |
Be the first who will post an article to this item!
Be the first who will post an article to this item!